Commit Graph

1283 Commits

Author SHA1 Message Date
Po Liu
0e61077b21 powerpc/c29xpcie: modify DDR parameter to make DDR more stable
DDR parameters clk_adjust were changed. This can make the DDR
run more stable. The new value were gotten by the DDR testing
tool.

Signed-off-by: Po Liu <Po.Liu@freescale.com>
2013-10-16 16:13:11 -07:00
Wolfgang Denk
d4c8aa9cb4 Coding Style cleanup: remove trailing empty lines
Signed-off-by: Wolfgang Denk <wd@denx.de>
2013-10-14 16:06:54 -04:00
Wolfgang Denk
93e1459641 Coding Style cleanup: replace leading SPACEs by TABs
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Drop changes for PEP 4 following python tools]
Signed-off-by: Tom Rini <trini@ti.com>
2013-10-14 16:06:54 -04:00
Wolfgang Denk
3765b3e7bd Coding Style cleanup: remove trailing white space
Signed-off-by: Wolfgang Denk <wd@denx.de>
2013-10-14 16:06:53 -04:00
Tom Rini
6297872cd5 Merge branch 'master' of git://git.denx.de/u-boot-arm 2013-10-02 11:45:22 -04:00
Fabio Estevam
a05f4ab6cc mx35pdk: Fix error handling in board_late_init()
If smc911x_initialize() fails we should return the error immediately.

While at it, also check the error from cpu_eth_init().

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2013-09-27 13:53:35 +02:00
Fabio Estevam
2cba60ac84 mx28evk: Propagate the error if cpu_eth_init() fails
If cpu_eth_init() fails we should return the error immediately.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-09-27 13:53:35 +02:00
Fabio Estevam
71d8b019d0 mx28evk: Fix checkpatch warning
Fix the following checkpatch warning:

$ ./tools/checkpatch.pl -F board/freescale/mx28evk/mx28evk.c
CHECK: Alignment should match open parenthesis
#109: FILE: freescale/mx28evk/mx28evk.c:109:
+	writel(CLKCTRL_ENET_TIME_SEL_RMII_CLK | CLKCTRL_ENET_CLK_OUT_EN,
+					&clkctrl_regs->hw_clkctrl_enet);

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-09-20 17:55:37 +02:00
Fabio Estevam
31f07964c8 mx6slevk: Add Ethernet support
mx6slevk has a SMSC8720 connected in RMII mode.

Add support for it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-09-20 17:55:37 +02:00
Fabio Estevam
e12408cc95 mx6qsabreauto: Return error if cpu_eth_init() fails
Currently board_eth_init() always return 0, but we should propagate the error
when cpu_eth_init() fails.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-09-20 17:55:36 +02:00
Fabio Estevam
cb427fe1c4 mx6sabresd: Return error if cpu_eth_init() fails
Currently board_eth_init() always return 0, but we should propagate the error
when cpu_eth_init() fails.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-09-20 17:55:36 +02:00
Fabio Estevam
59f46f4a73 mx6sabresd: Reset counter to prevent error message
If a HDMI cable is not connected, the following message is seen on boot:

CPU:   Freescale i.MX6Q rev1.1 at 792 MHz
Reset cause: POR
Board: MX6-SabreSD
DRAM:  1 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
No panel detected: default to HDMI
unsupported panel HDMI

Reset the 'i' variable to fix the 'unsupported panel' message.

This follows the same idea of commit 47ac53d7ae (imx: nitrogen6x/mx6qsabrelite:
Fix bug in board_video_skip).

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-09-20 17:55:36 +02:00
Fabio Estevam
1601ba4d1e mx6sabresd: Avoid hang when HDMI cable is not connected
Since commit d9b894603 (mx6sabresd: Add LVDS splash screen support) the
following hang happens if the HDMI cable is not connected or the 'panel'
variable is not set:

U-Boot 2013.10-rc2-12978-g47ac53d-dirty (Sep 11 2013 - 15:07:38)

CPU:   Freescale i.MX6Q rev1.2 at 792 MHz
Reset cause: POR
Board: MX6-SabreSD
DRAM:  1 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
...

Provide a check to 'dev->detect' in order to prevent the hang.

Reported-by: Pardeep Kumar Singla <b45784@freescale.com>
Suggested-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-09-20 17:55:36 +02:00
Robert P. J. Day
1bce2aeb6f Cosmetic: Fix a number of typos, no functional changes.
Fix various misspellings of things like "environment", "kernel",
"default" and "volatile", and throw in a couple grammar fixes.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
2013-09-20 10:30:54 -04:00
Stefano Babic
c4a7ece020 Merge branch 'master' of git://git.denx.de/u-boot-arm
Conflicts:
	MAINTAINERS
	boards.cfg

Signed-off-by: Stefano Babic <sbabic@denx.de>
2013-09-13 12:10:07 +02:00
Fabio Estevam
d9b8946035 mx6sabresd: Add LVDS splash screen support
mx6sabresd boards can be connected to a Hannstar XGA LVDS panel.

Add support for displaying U-boot splashscreen on it.

By default, HDMI splash is selected.

In order to use splash via LVDS, do the following in the U-boot prompt:

setenv panel Hannstar-XGA
save

and reboot.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-09-10 19:12:55 +02:00
Marek Vasut
7b8657e2bd ARM: mxs: Receive r0 and r1 passed from BootROM
Make sure value in register r0 and r1 is preserved and passed to
the board_init_ll() and mxs_common_spl_init() where it can be
processed further. The value in r0 can be configured during the
BootStream generation to arbitary value, r1 contains pointer to
return value from CALL'd function.

This patch also clears the value in r0 before returning to BootROM
to make sure the BootROM is not confused by this value.

Finally, this patch cleans up some comments in the start.S file.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
2013-09-10 19:12:54 +02:00
Ying Zhang
81b867aa44 SPL: P1022DS: switch to new multibus/multiadapter support
- Added section "u_boot_list" in arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
- Use the function i2c_init_all instead of i2c_init

Signed-off-by: Ying Zhang <b40530@freescale.com>
2013-09-09 07:43:43 +02:00
Shengzhou Liu
e1a2a34019 powerpc/p1010rdb: fix calculating ddr_freq_mhz
There was a bug for calculating ddr_freq_mhz,
it should be divided by 1000000 rather than 0x1000000.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Acked-by: York Sun <yorksun@freescale.com>
2013-08-20 10:46:58 -07:00
Shaohui Xie
1c68d01eea powerpc/t4240: add QSGMII interface support
Also some fix for QSGMII.
1. fix QSGMII configure of Serdes2.
2. fix PHY address of QSGMII MAC9 & MAC10 for each FMAN.
3. fix dtb for QSGMII interface.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Acked-by: York Sun <yorksun@freescale.com>
2013-08-20 10:46:48 -07:00
Shaohui Xie
ae3dcd0488 powerpc/t4240: fix lanes routing for QSGMII protocols
When using QSGMII protocols, the first lane and third lane on each slot
need to be swapped.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Acked-by: York Sun <yorksun@freescale.com>
2013-08-20 10:46:39 -07:00
Shaohui Xie
7d0d355fee powerpc/common/vsc3316: remove const from vsc3316_config parameter define
Since the parameters need to be modified according to different Serdes
protocols at runtime, the const will block this. Also remove const from
arrays define used by vsc3316_config.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Acked-by: York Sun <yorksun@freescale.com>
2013-08-20 10:46:26 -07:00
York Sun
bf90256623 SPDX-License-Identifier: clean up license header
This patch cleans up license header in these files:
	board/freescale/p1022ds/spl.c
	drivers/mmc/fsl_esdhc_spl.c
	drivers/mtd/spi/fsl_espi_spl.c

Signed-off-by: York Sun <yorksun@freescale.com>
2013-08-20 10:15:37 -07:00
Prabhakar Kushwaha
997399fa42 powerpc: Fix CamelCase checkpatch warnings
85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions.
because of this code checkpatch script generates "WARNING: Avoid CamelCase".

Convert variables name to normal naming convention and modify board, driver
files with updated the new structure.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Acked-by: York Sun <yorksun@freescale.com>
2013-08-20 09:57:51 -07:00
Ying Zhang
5d97fe2a04 powerpc: p1022ds: add TPL for p1022ds nand boot
TPL is introduced in the patch "NAND: TPL : introduce the TPL
based on the SPL", here enable TPL for p1022ds nand boot.

Signed-off-by: Ying Zhang <b40530@freescale.com>
Acked-by: York Sun <yorksun@freescale.com>
2013-08-20 09:57:51 -07:00
Ying Zhang
382ce7e909 powerpc : p1022ds : Enable p1022ds to start from eSPI with SPL
Enable p1022ds to start from eSPI with SPL.

Signed-off-by: Ying Zhang <b40530@freescale.com>
Acked-by: York Sun <yorksun@freescale.com>
2013-08-20 09:47:59 -07:00
Ying Zhang
7c8eea59b8 powerpc: p1022ds: Enable P1022DS to boot from SD Card with SPL
Enable p1022ds to start from eSDHC with SPL.

Signed-off-by: Ying Zhang <b40530@freescale.com>
Acked-by: York Sun <yorksun@freescale.com>
2013-08-20 09:47:38 -07:00
Tom Rini
e20cc2ca15 Merge branch 'master' of git://88.191.163.10/u-boot-arm
Fixup an easy conflict over adding the clk_get prototype and USB_OTG
defines for am33xx having moved.

Conflicts:
	arch/arm/include/asm/arch-am33xx/hardware.h

Signed-off-by: Tom Rini <trini@ti.com>
2013-08-18 14:14:34 -04:00
Po Liu
2810312043 powerpc/c29xpcie: add readme document for c29xpcie
Signed-off-by: Po Liu <Po.Liu@freescale.com>
2013-08-14 10:58:34 -07:00
York Sun
3aab0cd852 powerpc/mpc85xx: Cleanup license header in source files
Fix the license header introduced by the following patches

Add TWR-P10xx board support
Add T4240EMU target
IDT8T49N222A configuration code
Add C29x SoC support
Add support for C29XPCIE board

Signed-off-by: York Sun <yorksun@freescale.com>
2013-08-12 15:04:24 -07:00
Mingkai Hu
a8d9758d01 powerpc/c29xpcie: add support for C29XPCIE board
C29XPCIE board is a series of Freescale PCIe add-in cards to perform
as public key crypto accelerator or secure key management module. It
includes C293PCIE board, C293PCIE board and C291PCIE board.

 - 512KB platform SRAM in addition to 512K L2 Cache/SRAM
 - 512MB soldered DDR3 32bit memory
 - CPLD System Logic
 - 64MB x16 NOR flash and 4GB x8 NAND flash
 - 16MB SPI flash

Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Singed-off-by: Po Liu <Po.Liu@freescale.com>
[yorksun: Fixup include/configs/C29XPCIE.h]
Signed-off-by: York Sun <yorksun@freescale.com>
2013-08-09 12:41:42 -07:00
Shaveta Leekha
cb033741f4 board/b4860qds: Add support for configuring SerDes1 Refclks
1) Add support in B4860 board files for using IDT driver where
   IDT8T49N222A is a low phase noise Frequency Translator / Synthesizer
   that generate different refclks for SerDes modules, used this driver
   for reconfiguring SerDes1 Refclks(based on SerDes1 protocols)
   for CPRI to work. CPRI works on 122.88MHz and default refclks coming
   on board are not suitable for it
2) Move SerDes1 refclk1 source selection from eth_b4860qds.c file
   to b4860qds board file, as SerDes1 Refclk1 would come from
   PHY MUX in case of certain protocols, that have been checked here.
   This change would make on board SGMIIs to work
3) Add I2C addresses for IDT8T49N222A devices in board/include file
4) Add define for PCA-I2C bus multiplexer, on which IDT devices exist

Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
Acked-by: York Sun <yorksun@freescale.com>
2013-08-09 12:41:41 -07:00
Shaveta Leekha
a5b225181e board/freescale/common: IDT8T49N222A configuration code
Add code for configuring IDT8T49N222A device for various output refclks
    - The IDT8T49N222A is a low phase noise Frequency Translator / Synthesizer with
      alarm and monitoring functions suitable for networking and
      communications applications. It is able to generate wide range of output
      frequencies.
    - In B4860QDS, it has been used to generate different refclks to SerDes modules
    - Programming of these devices are performed by I2C interface.

Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
Acked-by: York Sun <yorksun@freescale.com>
2013-08-09 12:41:40 -07:00
Priyanka Jain
f9d379a707 board/bsc9132qds: Configure DSP DDR controller
BSC9132 SoC has two separate DDR controllers for PowerPC side and DSP side
DDR. They are mapped to PowerPC and DSP CCSR space respectively.
BSC9132QDS has two on-board MC34716EP DDR3 memory one connected to PowerPC
and other to DSP side controller.

Configure DSP DDR controller similar to PowerPC side DDR controller as
memories are exactly similar.

Signed-off-by: Manish Jaggi <manish.jaggi@freescale.com>
Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Acked-by: York Sun <yorksun@freescale.com>
2013-08-09 12:41:40 -07:00
Priyanka Jain
64501c6698 board/bsc9132qds: Add DSP side tlb and laws
BSC9132QDS is a Freescale Reference Design Board for BSC9132 SoC which is a
integrated device that contains two powerpc e500v2 cores and two DSP
starcores.

To support DSP starcore
-Creating LAW and TLB for DSP-CCSR space.
-Creating LAW for DSP-core subsystem M2 and M3 memory
-Creating LAW for 1GB DDR which is connected exclusively to DSP-cores

Signed-off-by: Manish Jaggi <manish.jaggi@freescale.com>
Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Acked-by: York Sun <yorksun@freescale.com>
2013-08-09 12:41:40 -07:00
Haijun.Zhang
45fdb627b3 p1020rdb-pd: platform support
Add new board p1020RDB-PD. P1020RDB-PD board was update from P1020RDB.
DDR changed from DDR2 1G to DDR3 2G.
NAND: 128 MiB
Flash: 64 MiB

Also change P1020RDB to P1020RDB-PC to distinguish from P1020RDB board.

Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com>
CC: Scott Wood <scottwood@freescale.com>
Acked-by: York Sun <yorksun@freescale.com>
2013-08-09 12:41:40 -07:00
York Sun
c63e137014 powerpc/mpc8xxx: Add memory reset control
JEDEC spec requires the clocks to be stable before deasserting reset
signal for RDIMMs. Clocks start when any chip select is enabled and
clock control register is set. This patch also adds the interface to
toggle memory reset signal if needed by the boards.

Signed-off-by: York Sun <yorksun@freescale.com>
2013-08-09 12:41:39 -07:00
York Sun
5ecf41cc3d powerpc/t4240qds: Adjust DDR timing for RDIMM
RDIMM has different timing. Tested RDIMM is MT18JSF1G72PDZ-1G9E1 for
dual rank. Single- and quad-rank are not tested due to availability.

Signed-off-by: York Sun <yorksun@freescale.com>
2013-08-09 12:41:39 -07:00
York Sun
1cb19fbb31 powerpc/T4240EMU: Add T4240EMU target
Add emulator support for T4240. Emulator has limited peripherals and
interfaces. Difference between emulator and T4240QDS includes:
	ECC for DDR is disabled due the procedure to load images
	No board FPGA (QIXIS)
	NOR flash has 32-bit port for higher loading speed
	IFC and I2C timing don't really matter, so set them fast
	No ethernet

Signed-off-by: York Sun <yorksun@freescale.com>
2013-08-09 12:41:39 -07:00
York Sun
f165bc3528 powerpc/corenet: Move RCW print to cpu.c
The RCW print is common for all corenet platforms. Not necessary to ducplicate
in each board file.

Signed-off-by: York Sun <yorksun@freescale.com>
2013-08-09 12:41:38 -07:00
Xie Xiaobo
49f5befafd powerpc/85xx: Add TWR-P10xx board support
TWR-P1025 Specification:
-----------------------
Memory subsystem:
   512MB DDR3 (on board DDR)
   64Mbyte 16bit NOR flash
   One microSD Card slot

Ethernet:
   eTSEC1: Connected to Atheros AR8035 GETH PHY
   eTSEC3: Connected to Atheros AR8035 GETH PHY

UART:
   Two UARTs are routed to the FDTI dual USB to RS232 convertor

USB: Two USB2.0 Type A ports

I2C:
   AT24C01B 1K Board EEPROM (8 bit address)

QUICC Engine:
   Connected to DP83849i PHY supply two 10/100M ethernet ports
   QE UART for RS485 or RS232

PCIE:
   One mini-PCIE slot

Signed-off-by: Michael Johnston <michael.johnston@freescale.com>
Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
[yorksun: Fixup include/configs/p1_twr.h]
Signed-off-by: York Sun <yorksun@freescale.com>
2013-08-09 12:41:25 -07:00
Stefano Babic
326ea986ac Merge git://git.denx.de/u-boot-arm
Conflicts:
	board/freescale/mx6qsabrelite/Makefile
	board/freescale/mx6qsabrelite/mx6qsabrelite.c
	include/configs/mx6qsabrelite.h

Signed-off-by: Stefano Babic <sbabic@denx.de>
2013-07-31 11:30:38 +02:00
Pardeep Kumar Singla
58cc978777 mx6qsabresd: Add splash screen support via HDMI
Signed-off-by: Pardeep Kumar Singla <b45784@freescale.com>
2013-07-27 10:49:45 +02:00
Fabio Estevam
f8b1e86d47 mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x
mx6qsabrelite and nitrogen6q boards are hardware compatible, so let's avoid the
code duplication and only use the nitrogen6x source code to make board code
maintainance easier.

Tested booting a mainline device tree kernel on a mx6qsabrelite board.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-07-26 16:44:29 +02:00
Tom Rini
c2120fbfbc Merge branch 'master' of git://git.denx.de/u-boot-i2c
The sandburst-specific i2c drivers have been deleted, conflict was just
over the SPDX conversion.

Conflicts:
	board/sandburst/common/ppc440gx_i2c.c
	board/sandburst/common/ppc440gx_i2c.h

Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:50:24 -04:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Alison Wang
1221b3d74a vf610: Add I2C support for Vybrid VF610 platform
This patch adds I2C support for Vybrid VF610 platform and adds
I2C0 support to VF610TWR board.

Signed-off-by: Alison Wang <b18965@freescale.com>
2013-07-23 08:34:57 +02:00
Heiko Schocher
00f792e0df i2c, fsl_i2c: switch to new multibus/multiadapter support
- added to fsl_i2c driver new multibus/multiadpater support
- adapted all config files, which uses this driver

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
2013-07-23 08:34:53 +02:00
Heiko Schocher
ea818dbbcd i2c, soft-i2c: switch to new multibus/multiadapter support
- added to soft_i2c driver new multibus/multiadpater support
- adapted all config files, which uses this driver

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
2013-07-23 05:54:29 +02:00
Wolfgang Denk
f4ea9f86d1 PPC MPC83xx: Fix MPC8323ERDB build warning
Fix:

mpc8323erdb.c: In function 'mac_read_from_eeprom':
mpc8323erdb.c:198:3: warning: dereferencing type-punned pointer will
break strict-aliasing rules [-Wstrict-aliasing]

Signed-off-by: Wolfgang Denk <wd@denx.de>
cc: Timur Tabi <timur@tabi.org>
cc: Kim Phillips <kim.phillips@freescale.com>
2013-07-15 18:03:15 -04:00
Tom Rini
fbbbc86e8e Merge branch 'master' of git://git.denx.de/u-boot-arm
Fix a trivial conflict in arch/arm/dts/exynos5250.dtsi about gpio and
serial.

Conflicts:
	arch/arm/dts/exynos5250.dtsi

Signed-off-by: Tom Rini <trini@ti.com>
2013-07-12 10:36:48 -04:00
Albert ARIBAUD
e6c7f86f03 Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' 2013-06-28 17:51:13 +02:00
Fabio Estevam
17f3f36652 mx28evk: Move README file inside board directory
Board specific READMEs should be located inside the respective board directory.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-06-26 17:40:39 +02:00
Pierre Aubert
c174797061 imx: Add support for the SabreSD shipped with i.MX6DL
The SabreSD platform is available with i.MX6Q or i.MX6DL. This patch adds the
support of the i.MX6DL. The config file and the board directory are renamed
to remove the reference to the MX6Q.

Signed-off-by: Pierre Aubert <p.aubert@staubli.com>
CC: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-06-26 17:34:11 +02:00
Tom Rini
348e47f766 Merge branch 'master' of git://git.denx.de/u-boot-arm 2013-06-22 07:38:12 -04:00
Albert ARIBAUD
47bd65ef05 arm: make __rel_dyn_{start, end} compiler-generated
This change is only done where needed: some linker
scripts may contain relocation symbols yet remain
unchanged.

__rel_dyn_start and __rel_dyn_end each requires
its own output section; putting them in relocation
sections changes their flags and breaks relocation.

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
Tested-by: Lubomir Popov <lpopov@mm-sol.com>
Tested-by: Jeroen Hofstee <jeroen@myspectrum.nl>
Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-06-21 23:05:29 +02:00
Albert ARIBAUD
d026dec875 arm: make __image_copy_{start, end} compiler-generated
This change is only done where needed: some linker
scripts may contain __image_copy_{start,end} yet
remain unchanged.

Also, __image_copy_end needs its own section; putting
it in relocation sections changes their flags and makes
relocation break.

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
Tested-by: Lubomir Popov <lpopov@mm-sol.com>
Tested-by: Jeroen Hofstee <jeroen@myspectrum.nl>
Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-06-21 23:05:05 +02:00
Albert ARIBAUD
09d81184e1 remove all references to .dynsym
Discard all .dynsym sections from linker scripts
Remove all __dynsym_start definitions from linker scripts
Remove all __dynsym_start references from the codebase

Note: this touches include/asm-generic/sections.h, which
is not ARM-specific, but actual uses of __dynsym_start
are only in ARM, so this patch can safely go through
the ARM repository.

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
Tested-by: Lubomir Popov <lpopov@mm-sol.com>
Tested-by: Jeroen Hofstee <jeroen@myspectrum.nl>
Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-06-21 23:04:05 +02:00
Chunhe Lan
5707233880 powerpc/85xx: Add P1023RDB board support
P1023RDB Specification:
-----------------------
Memory subsystem:
   512MB DDR3 (Fixed DDR on board)
   64MB NOR flash
   128MB NAND flash

Ethernet:
   eTSEC1: Connected to Atheros AR8035 GETH PHY
   eTSEC2: Connected to Atheros AR8035 GETH PHY

PCIe:
   Three mini-PCIe slots

USB:
   Two USB2.0 Type A ports

I2C:
   AT24C08 8K Board EEPROM (8 bit address)

Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-06-20 17:08:53 -05:00
York Sun
5bdeff3214 powerpc/pixis: Fix pixis help message
"pixis_reset help" command prints the message without a new line "\n",
which makes the prompt on the same line.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-06-20 17:08:52 -05:00
Prabhakar Kushwaha
505c293ffd board/p1010rdb: Fix PCIe TLB creation on CONFIG_PCI define
PCIe TLB should be created with CONFIG_PCI defined

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-06-20 17:08:50 -05:00
Liu Gang
69fdf90010 powerpc/t4qds: Slave module for boot from SRIO and PCIE
When a T4 board boots from SRIO or PCIE, it needs to finish these processes:
	1. Set all the cores in holdoff status.
	2. Set the boot location to one PCIE or SRIO interface by RCW.
	3. Set a specific TLB entry for the boot process.
	4. Set a LAW entry with the TargetID of one PCIE or SRIO for the boot.
	5. Set a specific TLB entry in order to fetch ucode and ENV from
	   master.
	6. Set a LAW entry with the TargetID one of the PCIE ports for
	   ucode and ENV.
	7. Slave's u-boot image should be generated specifically by
	   make xxxx_SRIO_PCIE_BOOT_config.
	   This will set SYS_TEXT_BASE=0xFFF80000 and other configurations.

For more information about the feature of Boot from SRIO/PCIE, please
refer to the document doc/README.srio-pcie-boot-corenet.

Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-06-20 17:08:49 -05:00
Liu Gang
5870fe44b2 powerpc/b4860qds: Slave module for boot from SRIO and PCIE
When a b4860qds board boots from SRIO or PCIE, it needs to finish these
processes:
	1. Set all the cores in holdoff status.
	2. Set the boot location to one PCIE or SRIO interface by RCW.
	3. Set a specific TLB entry for the boot process.
	4. Set a LAW entry with the TargetID of one PCIE or SRIO for the boot.
	5. Set a specific TLB entry in order to fetch ucode and ENV from
	   master.
	6. Set a LAW entry with the TargetID one of the PCIE ports for
	   ucode and ENV.
	7. Slave's u-boot image should be generated specifically by
	   make xxxx_SRIO_PCIE_BOOT_config.
	   This will set SYS_TEXT_BASE=0xFFF80000 and other configurations.

For more information about the feature of Boot from SRIO/PCIE, please
refer to the document doc/README.srio-pcie-boot-corenet.

Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-06-20 17:08:48 -05:00
Prabhakar Kushwaha
f64bd7c038 powerpc/mpc85xx:Fix "boot page TLB" entry size for NAND SPL
e500v2 processor does not support 8K page size TLB entries.

So create new TLB entry only during NAND SPL boot.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-06-20 17:08:47 -05:00
Andy Fleming
8bd00c9494 85xx: Change case of MPC85XX_PORBMSR_ROMLOC_SHIFT
All the other constants use lowercase 'x' in "MPC85xx", so we
duplicate that here.

Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-06-20 16:09:09 -05:00
Priyanka Jain
1d2949aeb3 board/bsc9131rdb: Update default boot environment settings
BSC9131RDB has 1GB DDR.
Out of this, only 880MB is passed on to Linux via bootm_size.
Remaining
-16MB is reserved for PowerPC-DSP shared control area
-128MB is reserved for DSP private area.

Also 256MB, out of this 880MB is required for data communication between
PowerPC and DSP core.
For this bootargs are modified to pass parameter to create 1 hugetlb
page of 256MB via default_hugepagesz, hugepagesz and hugepages

Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-06-20 16:09:08 -05:00
Priyanka Jain
765b0bdb89 board/bsc9131rdb: Add DSP side tlb and laws
BSC9131RDB is a Freescale Reference Design Board for
BSC9131 SoC which is a integrated device that contains
one powerpc e500v2 core and one DSP starcore.

To support DSP starcore
-Creating LAW and TLB for DSP-CCSR space.
-Creating LAW for DSP-core subsystem M2 memory

Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-06-20 16:09:08 -05:00
Priyanka Jain
087cf44fcd board/bsc9131rdb: Add targets for Sysclk 100MHz
BSC9131RDB supports Sysclk
-66MHz if jumper J16 is close (default state)
-100MHz if jumper J16 is open

Add targets
-BSC9131RDB_NAND_SYSCLK100 : for NAND boot at Sysclk 100MHz
-BSC9131RDB_SPIFLASH_SYSCLK100: for SPI boot at Sysclk 100MHz

Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-06-20 16:09:08 -05:00
Prabhakar Kushwaha
83e0c2bbe3 board/bsc9132qds:Add NAND boot support using new SPL format
- Add NAND boot target
   - defines constants
   - Add spl_minimal.c to initialise DDR
   - update TLB, LAW entries as per NAND boot

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-06-20 16:09:08 -05:00
Prabhakar Kushwaha
f159326926 board/bsc9131rdb:Add NAND boot support using new SPL format
- Add NAND boot target
   - defines constants
   - Add spl_minimal.c to initialise DDR
   - update TLB entries as per NAND boot

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-06-20 16:09:07 -05:00
Prabhakar Kushwaha
0fa934d235 board/p1010rdb:Add NAND boot support using new SPL format
- defines constants
  - Add spl_minimal.c to initialise DDR
  - update TLB entries as per NAND boot
  - remove nand_spl support for P1010RDB

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-06-20 16:09:07 -05:00
Prabhakar Kushwaha
3a88179d03 powerpc/mpc85xx: new SPL support for IFC NAND
Linker script is not able find start.o binary. So add its absolute path in
u-boot-spl.lds. This change is similar to u-boot-nand.lds

common/Makefile: Avoid compiling unnecssary files

fsl_ifc_spl.c : It is is responsible for reading u-boot binary from
NAND flash and copying into DDR. It also transfer control from NAND SPL
to u-boot image present in DDR.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-06-20 16:08:58 -05:00
Albert ARIBAUD
10e167329b Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Conflicts:
	drivers/serial/Makefile
2013-06-08 14:35:10 +02:00
Fabio Estevam
4a1c7b13ae vf610twr: Drop unneeded 'status' variable
No need to use the 'status' variable, so just remove it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Otavio Salvador <otavio@ossystems.com.br>
2013-06-06 17:52:08 +02:00
Andrew Gabbasov
0c54f4b7c8 mx6: mx6qsabrelite/nitrogen6x: Remove incorrect setting of gpio CS signal
The number of gpio signal is packed inside CONFIG_SF_DEFAULT_CS macro
(shifted and or'ed with chip select), so it's incorrect to pass
that macro directly as an argument to gpio_direction_output() call.

Also, SPI driver sets the direction and initial value of a gpio,
used as a chip select signal, before any actual activity happens
on the bus.

So, it is safe to just remove the gpio_direction_output call,
that works incorrectly, thus making no effect, anyway.

Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Tested-by: Robert Winkler <robert.winkler@boundarydevices.com>
Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
2013-06-03 13:25:46 +02:00
Renato Frias
a1f67807ff mx6qsabreauto: Add Port Expander reset
There are 3 IO expanders on the mx6qsabreauto all reset by the
same GPIO, just set it to high to use the IO.

Signed-off-by: Renato Frias <b13784@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2013-06-03 13:19:41 +02:00
Renato Frias
195781657c mx6qsabreauto: Add i2c to mx6qsabreauto board
Add i2c2 and 3 to mx6qsabreauto board, i2c3 is multiplexed
use gpio to set steering.

Signed-off-by: Renato Frias <b13784@freescale.com>
Reviewed-by: Otavio Salvador <otavio@ossystems.com.br>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2013-06-03 13:19:11 +02:00
Alison Wang
8c653124a3 arm: vf610: Add basic support for Vybrid VF610TWR board
VF610TWR is a board based on Vybrid VF610 SoC.

This patch adds basic support for Vybrid VF610TWR board.

Signed-off-by: Alison Wang <b18965@freescale.com>
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-06-03 10:56:54 +02:00
Albert ARIBAUD
3acb324ff1 mx31pdk: copy SPL directly, not using relocate_code.
Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Tested-by: Simon Glass <sjg@chromium.org>
2013-05-30 20:23:08 +02:00
Albert ARIBAUD
a19b0dd62d Merge branch 'u-boot/master' into 'u-boot-arm/master'
Conflicts:
	common/cmd_fpga.c
	drivers/usb/host/ohci-at91.c
2013-05-30 14:45:06 +02:00
Shaveta Leekha
6eaeba23dd powerpc/b4860qds: Add LAW Target ID and Create LAW entry for Maple
Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-24 16:54:14 -05:00
Shaohui Xie
e14cdc0a69 powerpc/p5040: fix mdio mux for 10G port
Current driver of p5040 assumes 10G port follows 1G port DTSEC5 in
eth port enum structure, it will assign mdio mux depend on this assumption.
This is not true with Fman V3, which added more 1G ports after port DTSEC5
in eth port enum structure, then 10G ports on p5040 will have wrong mdio mux.
So we use dynamic index for 10G ports instead of hardcoded enum value
when doing mdio mux for 10G ports.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-24 16:54:14 -05:00
Shaohui Xie
f9539a9caa powerpc/p2041: fix serdes reference clock frequency display for PC board
PC board has different serdes clock setting with PB board, it uses same
serdes frequency setting on bank2 as on bank1. PC board can be distingushed
from PB board by checking CPLD version, if running on PC board, then fix
the serdes reference clock frequency of bank2.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-24 16:54:13 -05:00
Shaveta Leekha
0fecbba80a powerpc/b4860: fix for Serdes connectivity to SFP's
Crossbar switches were wrongly programmed to
route the CPRI lanes to SFP as the connectivity table
was not correct.
Modified it correctly for SFPs connections.

Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-24 16:54:13 -05:00
Shengzhou Liu
037e19b812 powerpc/t4240qds: fix PHY reset timeout issue
QSGMII card has different PHY address against previous SGMII card.
We check the type of card in slots and set correct PHY address to
avoid complainning "PHY reset timed out" during u-boot booting up.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-24 16:54:13 -05:00
York Sun
e1379b0730 powerpc/t4qds: Add SW7[4] in the DIP switch display
SW7[4] is the new bit which controls the mapping of eMMC vs SDHC.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-24 16:54:13 -05:00
Suresh Gupta
16d88f415a Enable XAUI interface for B4860QDS
- Added SERDES2 PRTCLs = 0x98, 0x9E
- Default Phy Addresses for Teranetics PHY on XAUI card
	The PHY addresses of Teranetics PHY on XAUI riser card are assigned
	based on the slot it is in. Switches SW4[2:4] and SW6[2:4] on
	AMC2PEX-2S On B4860QDS, AMC2PEX card decide the PHY addresses on slot1
        and slot2
- Configure MDIO for 10Gig Mac

Signed-off-by: Suresh Gupta <suresh.gupta@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-24 16:54:12 -05:00
Stephen George
49e946cb6a board/t4240qds, b4860qds: LAW/TLB for DCSR set to size 32M
Debug trace buffers are memory mapped in DCSR space beyond 4M.

Signed-off-by: Stephen George <stephen.george@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-24 16:54:12 -05:00
Shaohui Xie
94025b1cd8 powerpc/p5040: enable PBL tool support
Provided a default RCW for P5040, then it can use PBL to build
ramboot image.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-24 16:54:12 -05:00
Ed Swarthout
f41388159a powerpc/t4qds: use clock measurement for sysclk and ddr clock
Use QIXIS measurement registers to obtain sysclk and ddr clock. This
allows using non-standard clock speeds, set by directly writing to
clock chip or store the values in qixis clock data eeprom.

Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-24 16:54:12 -05:00
Ed Swarthout
428ea86c64 powerpc/qixis: add clock measurement registers
QIXIS includes frequency measurement functions for each major processor
clock input. After reset (and after clocks are stable), QIXIS measures
the clocks against a reference frequency and stores the results in
CLK_FREQ registers. A base register supplies a multiplier which allows
directly obtaining the measured value, without requiring knowledge of
the target system or QIXIS core frequency.

Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-24 16:54:11 -05:00
Shaohui Xie
c79fd50382 T4240/ramboot: enable PBL tool for T4240
Added a default RCW(1_28_6_12) and PBI configure file for T4240, so it can use
PBL tool to produce the ramboot image.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-24 16:54:10 -05:00
York Sun
0aadf4aa51 powerpc/t4240qds: Add VDD override
Allow VDD voltage overriding with a command. This is an add-on feasture of
VID. To override VDD, use command vdd_override with the value of voltage
in mV, for example

vdd_override <voltage in mV, eg. 1050>

The above example will set the VDD to 1.050 volt. Any wrong value out of
range of 0.8188 to 1.2125 volt or invalid string is ignored.

In addition to the command, if overriding VDD is needed earlier in booting
process, save an variable and reboot:

setenv t4240qds_vdd_mv <voltage in mV>
saveenv

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-24 16:54:10 -05:00
York Sun
9cefbd64b2 powerpc/t4240qds: Add board detail for bdinfo command
Print more detail information including core voltage, RCW source, switch
settings, etc. with bdinfo command.

Signed-off-by: York Sun <yorksun@freescale.com>
CC: Wolfgang Denk <wd@denx.de>
CC: Tom Rini <trini@ti.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-24 16:54:09 -05:00
Fabio Estevam
eadfc135d3 mx23evk: Add splash screen support
Enable display support.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-05-16 17:44:46 +02:00
Fabio Estevam
68661db2dc mx28evk: Add splash screen support
Enable display support.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-05-16 17:44:46 +02:00
Shaohui Xie
f63d638dad T4240/eth: fix SGMII card PHY address
QSGMII card assumed to be used by default, but if SGMII card is used,
it will use different PHY address, but we don't know which card is used
until we access PHY on the card. So we check the card type slot by slot,
if we can read a PHY ID by reading a SGMII PHY address on a slot, then
the slot must have a SGMII card pluged, we mark all ports on that slot,
and fix dts to use the SGMII card PHY address when doing dts fixup
for the marked ports.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-14 16:13:25 -05:00
Ed Swarthout
9c0a6de21d powerpc/t4qds: Fix disabling remote I2C connection
Only clear IRE bit in qixis brdcfg5 register and keep other bits
unchanged.

Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-14 16:13:25 -05:00
York Sun
431047955b powerpc/b4860qds: Assign DDR address in board file
B4860QDS requires DDRC2 has 0 as base address and DDRC1 has higher address.
This is the requirement for DSP cores to run in 32-bit address space.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-14 16:13:25 -05:00
Shaohui Xie
04bccc3ab0 T4240/net: use QSGMII card PHY address by default
Use QSGMII card PHY address as default SGMII card PHY address, QSGMII card
PHY address is variable depends on different slot.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-14 16:13:25 -05:00
Shengzhou Liu
959278083d t4240qds/eth: fixup ethernet for t4240qds
1, Implemented board_ft_fman_fixup_port() to fix port for kernel.
2, Implemented fdt_fixup_board_enet() to fix node status of different
   slots and interfaces.
3, Adding detection of slot present for XGMII interface.
4, There is no PHY for XFI, so removed related phy address settings.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-14 16:13:24 -05:00
York Sun
97c7fe61b8 powerpc/t4240qds: Add voltage ID support
T4240 has voltage ID fuse. Read the fuse and configure the voltage
correctly. Core voltage has higher tolerance on over side than below.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-14 16:00:28 -05:00
York Sun
054dfd9b9d powerpc/t4240qds: Update DDR timing table
Update the timing table to support more rank density, based on the theory
that similar density DIMMs have similar clock adjust and write level start
timing. Update the timing for 1600 and 1866 MT/s. Tested with Micron
MT18JSF1G72AZ-1G9E1 DIMMs, iDIMM M3CN-4GMJ3C0C-M92.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-14 16:00:27 -05:00
Roy Zang
9458f6d83a T4/serdes: fix the serdes clock frequency
Reverse the bit sequence to set and display serdes clock frequency
correctly. The correct bit maps in BRDCFG2 are
0	1	2	3	4	5	6	7
S1RATE[1:0]	S2RATE[1:0] 	S3RATE[1:0] 	S4RATE[1:0]

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-14 16:00:25 -05:00
Albert ARIBAUD
ec7023db8d Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Conflicts:
	drivers/mtd/nand/mxc_nand_spl.c
	include/configs/m28evk.h
2013-05-11 09:25:36 +02:00
Anatolij Gustschin
b1e6c4c3d4 Fix references to the documentation files
Many boot image configuration files refer to the
appropriate documentation file, but these references
contain typos in the directory and file name. Fix
them. Also fix reference to doc/README.SPL file.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
2013-05-10 08:16:33 -04:00
Benoît Thébaudeau
68088ceed7 imx: mx35pdk: Fix MUX2_CTR GPIO
MUX2_CTR is on GPIO1[5], not GPIO2[5], and it needs to be set high in order to
connect the FEC.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-05-06 15:21:59 +02:00
Fabio Estevam
3d11444c42 mx23evk: Do not set voltage selection bit for SSP pads
mx23 SSP pad registers do not contain voltage selection bit, so just remove it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-05-06 09:55:51 +02:00
Benoît Thébaudeau
544544a060 imx: mx53smd: Convert to iomux-v3
There is no change of behavior.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-05-05 17:55:05 +02:00
Benoît Thébaudeau
721d0b0026 imx: mx53loco: Convert to iomux-v3
There is no change of behavior.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-05-05 17:55:05 +02:00
Benoît Thébaudeau
58f0764658 imx: mx53evk: Convert to iomux-v3
There is no change of behavior.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-05-05 17:55:05 +02:00
Benoît Thébaudeau
5053b59300 imx: mx53ard: Convert to iomux-v3
There is no change of behavior.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-05-05 17:55:05 +02:00
Benoît Thébaudeau
4d15d36c08 imx: mx51evk: Convert to iomux-v3
There is no change of behavior, except for older silicon revisions for which
support is removed.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-05-05 17:55:04 +02:00
Benoît Thébaudeau
105c9eaf9b imx: mx35pdk: Convert to iomux-v3
There is no change of behavior.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-05-05 17:55:03 +02:00
Benoît Thébaudeau
0f6829e111 imx: mx35pdk: Fix WDOG_RST iomux function
The signal connected from this pin to the PMIC is WDOG_B, i.e. ALT0 mode, not
ALT1 (which even corresponds to nothing).

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-05-05 17:55:03 +02:00
Benoît Thébaudeau
1b1c526751 imx: mx25pdk: Fix GPIO assignments
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-05-05 17:55:03 +02:00
Benoît Thébaudeau
d6208a3cf9 imx: mx25pdk: Convert to iomux-v3
There is no change of behavior, even if some pad control values could probably
be simplified.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-05-05 17:55:03 +02:00
Fabio Estevam
0ede8272d0 mx23evk: Fix DDR pin iomux settings
Change MUX_CONFIG_EMI to use the same drive strength as the bootlets code from
Freescale, which results in much better stability.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-05-05 17:08:46 +02:00
Xu Jiucheng
545c12cf9a powerpc/p1_p2_rdb_pc: Add a pin to reset the DDR chip for P1021RDB-PC
When P1021RDB-PC reboot system, the board will hung at uboot DDR
configuration. For P1021RDB-PC DDR reset pin is multiplex with
QE, so uboot will reserve this pin for QE and skip DDR reset.
Other platforms without QE will do this reset. This patch adds
a slight code to reset DDR chip by QE CE_PB8 pin for NAND and
NOR FLASH boot. For booting from SPI FALSH and SD card, it
seems possible to use the rom on chip to write to the GPIO
pins before configuring the DDR.

Signed-off-by: Xu Jiucheng <B37781@freescale.com>
Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-02 16:57:34 -05:00
Shengzhou Liu
f68a730538 powerpc/p1010rdb: Change flexcan compatible string
Change flexcan compatible string from "fsl,flexcan-v1.0"
to "fsl,p1010-flexcan" to match the device tree.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-02 16:57:33 -05:00
Zhicheng Fan
7d83b79c2b qoriq/p1_p2_rdb_pc: USB device-tree fixups for P1020
Resolve P1020 second USB controller multiplexing with eLBC
         - mandatory to mention USB2 in hwconfig string to select it
           over eLBC, otherwise USB2 node is removed
         - works only for SPI and SD boot

Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Zhicheng Fan <B32736@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-02 16:56:45 -05:00
Liu Gang
57966101c8 powerpc/b4860qds: Add the tlb entries for SRIO interfaces
Add the tlb entries based on the configuration of the SRIO interfaces.
Every SRIO interface has 256M space:

	#define CONFIG_SYS_SRIO1_MEM_VIRT   0xa0000000
	#define CONFIG_SYS_SRIO1_MEM_PHYS   0xc20000000ull

	#define CONFIG_SYS_SRIO2_MEM_VIRT   0xb0000000
	#define CONFIG_SYS_SRIO2_MEM_PHYS   0xc30000000ull

Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-02 16:56:44 -05:00
Matthew McClintock
f45210d6e7 powerpc/p1022ds: Add support for NAND and NAND boot using SPL
Add defines needed to access NAND, remove second flash bank that is
actually connected to NAND.

Add nand booting support for P1022DS with hardcoded DDR config using
SPL framework from 2011

Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
Signed-off-by: Jiang Yutang <b14898@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-02 16:56:43 -05:00
Jiang Bin
acac075b94 board/freescale/common/cds_pci_ft.c: Fix rotate wrong cells in interrupt-map property
For linux 3.x, the size of each item in interrupt-map property is 9 not 7.
Don't use the static value and calculate the size with following cells:
	PCI #address-cells, PCI #interrupt-cells,
	PIC address, PIC #address-cells, PIC #interrupt-cells.

Signed-off-by: Bin Jiang <bin.jiang@windriver.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-02 16:56:42 -05:00
Michael Heimpold
d196bd8803 env_mmc: add support for redundant environment
This patch add support for storing the environment redundant on
mmc devices. Substantially it re-uses the logic from the NAND implementation,
that means using an incremental counter for marking newer data.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
2013-05-01 16:41:10 -04:00
Benoît Thébaudeau
7e2173cf82 imx: iomux-v3: Include PKE and PUE to pad control pull definitions
PUE requires PKE to mean something, as do pull values with PUE, so do not
compell users to explicitly use PKE and PUE everywhere. This is also what is
done on Linux and what has already been done for i.MX51.

By the way, remove some unused pad control definitions.

There is no change of behavior.

Note that SPI_PAD_CTRL was defined by several boards with a pull value, but
without PKE or PUE, which means that no pull was actually enabled in the pad.
This might be a bug in those boards, but this patch does not change the
behavior, so it just removes the meaningless pull value from those definitions.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-04-28 11:15:07 +02:00
Benoît Thébaudeau
8f3ff11c1f imx: Homogenize and fix fuse register definitions
IIM:
 - Homogenize prg_p naming (the reference manuals are not always self-consistent
   for that).
 - Add missing SCSx and bank registers.
 - Fix the number of banks on i.MX53.

OCOTP:
 - Rename iim to ocotp in order to avoid confusion.
 - Rename fuse_data to read_fuse_data, and sticky to sw_sticky, according to the
   reference manual.
 - Merge the existing spinoff gp1 fuse definition on i.MX6.
 - Fix the number of banks on i.MX6.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2013-04-28 11:07:40 +02:00
Fabio Estevam
1155d555d6 mx53ard: Move register masks into imx-regs.h
imx-regs.h is more appropriate location for containing register masks.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
2013-04-25 21:48:21 +02:00
Otavio Salvador
f07e286c7c mx6qsabresd: Return status when initializing MMC
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2013-04-25 21:32:45 +02:00
Fabio Estevam
7a56f1791d imx: mx6q_4x_mt41j128.cfg: Setup CCM_CCOSR register
Setup CCM_CCOSR register to provide a CKO1 clock frequency of 16.5 MHz.

CKO1 drives sgtl5000 codec clock on mx6qsabrelite and doing this setup in the
bootloader will allow us to remove a lot of code in arch/arm/mach-imx/mach-imx6q.c
from the mainline kernel.

mx6q_4x_mt41j128.cfg is also used by mx6qsabresd, and it is safe to use it for
this board as well.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-04-25 21:14:19 +02:00
Stefan Roese
b29ca4a158 imx: Add titanium board support (i.MX6 based)
Titanium is a i.MX6 based board from ProjectionDesign / Barco. This
patch adds support for this board with the newly introduced NAND
support for i.MX6.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
2013-04-22 10:26:40 +02:00
Fabio Estevam
57ca432fb9 mx6sl: Add initial support for mx6slevk board
mx6slevk board is a development board from Freescale based on the mx6 solo-lite
processor.

For details about mx6slevk, please refer to:
http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=IMX6SLEVK&parentCode=i.MX6SL&fpsp=1

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-04-22 09:58:19 +02:00
Albert ARIBAUD
f84a7b8f54 ARM: Fix __bss_start and __bss_end in linker scripts
Commit 3ebd1cbc introduced compiler-generated __bss_start
and __bss_end__ and commit c23561e7 rewrote all __bss_end__
as __bss_end. Their merge caused silent and harmless but
potentially bug-inducing clashes between compiler- and linker-
generated __bss_end symbols.

Make __bss_end and __bss_start compiler-only, and create
__bss_base and __bss_limit for linker-only use.

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
Reported-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-04-13 22:37:20 +02:00
Benoît Thébaudeau
1a9a91dcfa arm: Make all linker scripts compatible with per-symbol sections
Let all ARM linker scripts handle properly -ffunction-sections
and -fdata-sections. This will be useful for future changes in order to create
symbol-specific sections in common .S files.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-04-12 07:55:09 +02:00
Benoît Thébaudeau
5c6db120fc arm: Remove unused relocate_code() parameters
Commit e05e5de7fa made the 2 1st parameters of
ARM's relocate_code() useless since it moved the code handling them to crt0.S.
So, drop these parameters.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-04-12 07:55:07 +02:00
Benoît Thébaudeau
da962b7175 nand: mxc: Switch NAND SPL to generic SPL
This also fixes support for mx31pdk and tx25, which had been broken by commit
e05e5de7fa.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-04-12 07:55:07 +02:00
Benoît Thébaudeau
68fbc0e686 imx: mx53ard: Add support for NAND Flash
Add support for the Samsung K9LAG08U0M NAND Flash (2-GiB MLC NAND Flash, 2-kiB
pages, 256-kiB blocks, 30-ns R/W cycles, 1 CS) on mx53ard.

eNFC_CLK_ROOT is set up with a cycle time of 37.5 ns (400 MHz / 3 / 5) for this
board, which satisfies the 30-ns NF R/W cycle requirement.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-04-12 07:55:04 +02:00
Albert ARIBAUD
be08abc242 Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' 2013-04-04 11:49:32 +02:00
Javier Martinez Canillas
7a3f481c6d i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe command
board/freescale/mx6qsabrelite/README explain a procedure to
update the SPI-NOR on the SabreLite board without Freescale
manufacturing tool but following this procedure leads to both
"sf erase" and "sf write" failing on a mx6qsabrelite board:

MX6QSABRELITE U-Boot > sf probe 1
MX6QSABRELITE U-Boot > sf erase 0 0x40000
SPI flash erase failed
MX6QSABRELITE U-Boot > sf write 0x10800000 0 0x40000
SPI flash write failed

This is because the chip-select 1 is wrong and the correct
value is 0x7300.

Since commit c1173bd0 ("sf command: allow default bus and chip selects")
the chip-select and bus arguments for the sf probe command are optional
so let's just remove it and use "sf probe" instead.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
2013-04-03 12:15:17 +02:00
Fabio Estevam
38e7007725 mx6: Fix get_board_rev() for the mx6 solo case
When booting a Freescale kernel 3.0.35 on a Wandboard solo, the get_board_rev()
returns 0x62xxx, which is not a value understood by the VPU
(Video Processing Unit) library in the kernel and causes the video playback to
fail.

The expected values for get_board_rev are:
0x63xxx: For mx6quad/dual
0x61xxx: For mx6dual-lite/solo

So adjust get_board_rev() accordingly and make it as weak function, so that we
do not need to define it in every mx6 board file.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
Acked-by: Eric Nelson <eric.nelson@boundarydevices.com>
2013-04-03 11:36:34 +02:00
Abbas Raza
aad4659a2f mmc: i.MX6: fsl_esdhc: Define maximum bus width supported by a board
Maximum bus width supported by some i.MX6 boards is not 8bit like
others. In case where both host controller and card support 8bit transfers,
they agree to communicate on 8bit interface while some boards support only 4bit interface.
Due to this reason the mmc 8bit default mode fails on these boards. To rectify this,
define maximum bus width supported by these boards (4bit). If max_bus_width is not
defined, it is 0 by default and 8bit width support will be enabled in host
capabilities otherwise host capabilities are modified accordingly.

It is tested with a MMCplus card.

Signed-off-by: Abbas Raza <Abbas_Raza@mentor.com>
cc: stefano Babic <sbabic@denx.de>
cc: Andy Fleming <afleming@gmail.com>
Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
Acked-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
2013-04-03 11:26:28 +02:00
Fabio Estevam
55600288ab mx6qsabrelite: README: No need to pass 'u-boot.imx'
The u-boot.imx binary is generated by default, so no need to pass it in the
'make' line.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-04-03 10:57:42 +02:00
Otavio Salvador
85449dbd4b mx6qsabre{sd,auto}: Add boot mode select
Adds support for 'bmode' command which let user to choose where to
boot from; this allows U-Boot to load system from another storage
without messing with jumpers.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2013-04-03 10:41:51 +02:00
Otavio Salvador
60bb462148 mx6qsabresd: Fix card detection for invalid card id case
This changes the code so in case an unkown value is passed it will
return as invalid.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2013-04-03 10:41:28 +02:00
Otavio Salvador
28ff917c28 mx6qsabresd: Document the mapping of USDHC[2-4]
This documents the SD card identifier so it is easier for user to spot
which card number will be used, if need.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2013-04-03 10:40:13 +02:00
Tom Rini
0ce033d258 Merge branch 'master' of git://git.denx.de/u-boot-arm
Albert's rework of the linker scripts conflicted with Simon's making
everyone use __bss_end.  We also had a minor conflict over
README.scrapyard being added to in mainline and enhanced in
u-boot-arm/master with proper formatting.

Conflicts:
	arch/arm/cpu/ixp/u-boot.lds
	arch/arm/cpu/u-boot.lds
	arch/arm/lib/Makefile
	board/actux1/u-boot.lds
	board/actux2/u-boot.lds
	board/actux3/u-boot.lds
	board/dvlhost/u-boot.lds
	board/freescale/mx31ads/u-boot.lds
	doc/README.scrapyard
	include/configs/tegra-common.h

Build tested for all of ARM and run-time tested on am335x_evm.

Signed-off-by: Tom Rini <trini@ti.com>
2013-03-18 14:37:18 -04:00
Simon Glass
3929fb0a14 Replace __bss_end__ with __bss_end
Note this is a tree-wide change affecting multiple architectures.

At present we use __bss_start, but mostly __bss_end__. This seems
inconsistent and in a number of places __bss_end is used instead.

Change to use __bss_end for the BSS end symbol throughout U-Boot. This
makes it possible to use the asm-generic/sections.h file on all
archs.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-15 16:13:54 -04:00
Albert ARIBAUD
6579d15c58 Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' 2013-03-15 15:18:31 +01:00
Albert ARIBAUD
ef123c5253 Refactor linker-generated arrays
Refactor linker-generated array code so that symbols
which were previously linker-generated are now compiler-
generated. This causes relocation records of type
R_ARM_ABS32 to become R_ARM_RELATIVE, which makes
code which uses LGA able to run before relocation as
well as after.

Note: this affects more than ARM targets, as linker-
lists span possibly all target architectures, notably
PowerPC.

Conflicts:
	arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
	arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
	arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
	board/ait/cam_enc_4xx/u-boot-spl.lds
	board/davinci/da8xxevm/u-boot-spl-da850evm.lds
	board/davinci/da8xxevm/u-boot-spl-hawk.lds
	board/vpac270/u-boot-spl.lds

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2013-03-12 23:28:40 +01:00
Albert ARIBAUD
3ebd1cbc49 arm: make __bss_start and __bss_end__ compiler-generated
Turn __bss_start and __bss_end__ from linker-generated
to compiler-generated symbols, causing relocations for
these symbols to change type, from R_ARM_ABS32 to
R_ARM_RELATIVE.

This should have no functional impact, as it affects
references to __bss_start and __bss_end__ only before
relocation, and no such references are done.

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2013-03-12 23:28:32 +01:00
Anatolij Gustschin
e5f538649c mpc512x: use common code for clock setting for all mpc512x boards
Only define enabled clocks in the config file and enable
the clocks in common code.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
Cc: Wolfgang Denk <wd@denx.de>
2013-03-09 08:22:23 +01:00
Anatolij Gustschin
676c66918a mpc512x: use common code for CSx configuration
Remove CSx configurations from board code and only define
required CSx macros in the board config file to configure
chip select windows and parameters.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
Cc: Wolfgang Denk <wd@denx.de>
2013-03-09 08:21:46 +01:00
Fabio Estevam
1b097cff51 mx6: Provide a structure for accessing HDMI registers
Provide a structure for accessing HDMI registers, so that we can use proper
read/write accessors.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Tested-by: Eric Nelson <eric.nelson@boundarydevices.com>
2013-03-07 18:03:44 +01:00
Otavio Salvador
920178d381 mx23evk: Adjust DRAM control register to use full 128MB of RAM
Adjust HW_DRAM_CTL14 to enable the chip selects to allow usage of full
128MB of RAM.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2013-03-07 17:22:57 +01:00
Eric Nelson
cfb8b9d335 i.MX6: consolidate pad names for multi-CPU boards
Rename all i.MX6 pad declarations to MX6_PAD_x, so a board
may support either i.MX6Quad/Dual (MX6Q) or i.MX6Dual-Lite/Solo
(MX6DL) by including the proper header.

Boards mx6qarm2, mx6qsabreauto, mx6qsabrelite, and mx6qsabresd
only support MX6Q, so they include mx6q_pins.h.

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2013-03-07 16:43:46 +01:00
Eric Nelson
74cf809972 i.MX6: mx6qsabrelite: indent with tabs
This patch has no functional changes and simply replaces
leading spaces with tabs.

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2013-03-07 16:43:46 +01:00
Stefano Babic
9cd9b34dc7 Merge branch 'master' of git://git.denx.de/u-boot-arm 2013-02-23 10:13:40 +01:00
Tom Rini
951c6baaf4 Merge branch 'master' of git://git.denx.de/u-boot-arm 2013-02-12 10:18:31 -05:00
Benoît Thébaudeau
7c92c54075 imx: mx6q DDR3 init: Benefit from available CL = 7
All the users of mx6q_4x_mt41j128.cfg (DDR3-1333H Micron MT41J128M16HA-15E or SK
hynix H5TQ2G63BFR-H9C for i.MX6Q SABRE Lite, and DDR3-1600K Micron
MT41K128M16JT-125:K for i.MX6 SABRE SD) support the optional down binning to
DDR3-1066F (CL = 7, CWL = 6), which is possible at 532 MHz, so use it.

In these conditions:
  tRCD(min) = 13.125 ns
  tRP(min) = 13.125 ns
  tRC(min) = max(tRAS(min, DDR3-1333H), tRAS(min, DDR3-1600K)) + tRP(min)
  tRAS(min, DDR3-1333H) = 36 ns
  tRAS(min, DDR3-1600K) = 35 ns

MMDC1_MDCFG0.tCL should be set to 7 nCK, encoded as 0x4 in the bit-field
MMDC1_MDCFG0[3:0].

MR0.CL should be set as in MMDC1_MDCFG0.tCL, i.e. to 7 nCK, which is encoded
as 0x6 in MRS.LMR.MR0.{A6:A4, A2} and MMDC1_MDSCR[22:20, 18].

MMDC1_MDCFG1.tCWL should be set to 6 nCK, encoded as 0x4 in the bit-field
MMDC1_MDCFG1[2:0].

MMDC1_MDCFG1.tRCD should be set to 13.125 ns, which is 7 nCK at 532 MHz, encoded
as 0x6 in the bit-field MMDC1_MDCFG1[31:29].

MMDC1_MDCFG1.tRP should be set to 13.125 ns, which is 7 nCK at 532 MHz, encoded
as 0x6 in the bit-field MMDC1_MDCFG1[28:26].

MMDC1_MDCFG1.tRC should be set to 49.125 ns, which is 27 nCK at 532 MHz, encoded
as 0x1A in the bit-field MMDC1_MDCFG1[25:21].

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-02-12 13:52:31 +01:00
Benoît Thébaudeau
b42b5b7a24 imx: mx6q DDR3 init: Fix MR0.PPD
MR0.PPD should be set as in MMDCx_MDPDC.SLOW_PD, i.e. to fast-exit mode, which
is encoded as 1 in MRS.LMR.MR0.A12 and MMDCx_MDSCR[28].

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-02-12 13:52:31 +01:00
Benoît Thébaudeau
1791b1f97f imx: mx6q DDR3 init: Fix RST_to_CKE
MMDC1_MDOR.RST_to_CKE should be set to 500 µs according to the JEDEC
specification for DDR3. With a cycle of 15.258 µs, this gives 33 cycles encoded
as 0x23 for the bit-field MMDC1_MDOR[5:0].

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-02-12 13:52:31 +01:00
Benoît Thébaudeau
ada02b8463 imx: mx6q DDR3 init: Fix SDE_to_RST
MMDC1_MDOR.SDE_to_RST should be set to 200 µs according to the JEDEC
specification for DDR3. With a cycle of 15.258 µs, this gives 14 cycles encoded
as 0x10 for the bit-field MMDC1_MDOR[13:8].

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-02-12 13:52:30 +01:00
Benoît Thébaudeau
aa53149e11 imx: mx6q DDR3 init: Fix tXPR
MMDC1_MDOR.tXPR should be set as specified for the JEDEC DDR3 timing tXPR.

For all DDR3 speed bins:
  tXPR(min) = max(5 nCK, tRFC(min) + 10 ns)
  tRFC(2 Gb) = 160 ns

All the users of mx6q_4x_mt41j128.cfg have a 2-Gb density (Micron
MT41J128M16HA-15E or SK hynix H5TQ2G63BFR-H9C for i.MX6Q SABRE Lite, and Micron
MT41K128M16JT-125:K for i.MX6 SABRE SD).

Hence, MMDC1_MDOR.tXPR should be set to max(5 nCK, 170 ns), which is 170 ns
and 91 nCK at 532 MHz, encoded as 0x5A in the bit-field MMDC1_MDOR[23:16].

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-02-12 13:52:30 +01:00
Benoît Thébaudeau
6904e37746 imx: mx6q DDR3 init: Fix tMRD
MMDC1_MDCFG1.tMRD should be set to max(tMRD, tMOD) for DDR3.

For all DDR3 speed bins:
  tMRD(min) = 4 nCK
  tMOD(min) = max(12 nCK, 15 ns)

Hence, MMDC1_MDCFG1.tMRD should be set to max(12 nCK, 15 ns), which is 12 nCK
at 532 MHz, encoded as 0xB in the bit-field MMDC1_MDCFG1[8:5].

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Tested-by: Eric Nelson <eric.nelson@boundarydevices.com>
2013-02-12 13:52:30 +01:00
Simon Glass
67ac13b1b9 ppc: Move lbc_clk and cpu to arch_global_data
Move these fields into arch_global_data and tidy up.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Update for bsc9132qds.c, b4860qds.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-02-04 09:04:57 -05:00
Prabhakar Kushwaha
960aa89bda board/common: Add support for QIXIS read/write using i2c
QIXIS FPGA is accessable via both i2c and flash controller.
Only flash controller access is supported.

Add support of i2c based access. It is quite useful in the scenario
where either flash controller path is broken or not present.

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-01-30 11:25:15 -06:00
Prabhakar Kushwaha
41d910118c powerpc/85xx: Add BSC9132QDS support
BSC9132QDS is a Freescale reference design board for BSC9132 SoC.
BSC9132 SOC is an integrated device that targets the evolving Microcell,
Picocell, and Enterprise-Femto base station market subsegments.
It combines Power Architecture e500v2 and DSP StarCore SC3850 core
technologies with MAPLE-B2F baseband acceleration processing elements.

BSC9132QDS Overview
 --------------------
  2Gbyte DDR3 (on board DDR), Dual Ranki
  32Mbyte 16bit NOR flash
  128Mbyte 2K page size NAND Flash
  256 Kbit M24256 I2C EEPROM
  128 Mbit SPI Flash memory
  SD slot
  USB-ULPI
  eTSEC1: Connected to SGMII PHY
  eTSEC2: Connected to SGMII PHY
  PCIe
  CPRI
  SerDes
  I2C RTC
  DUART interface: supports one UARTs up to 115200 bps for console display

Apart from the above it also consists various peripherals to support DSP
functionalities.

This patch adds support for mainly Power side functionalities and peripherals

Signed-off-by: Naveen Burmi <NaveenBurmi@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-01-30 11:25:14 -06:00
Valentin Longchamp
c4d580797d powerpc/p2041: add RCW file for P2041RDB
All the dev boards of Freescale's QorIQ family have a RCW that is
supported by the u-boot.pbl build target. This patch adds one for the
P2041 dev board.

This RCW is suitable for the RAMBOOT_PBL scenarios and was tested on the
P2041RDB booting from the eSPI NOR Flash (P2041RDB_SPIFLASH config).

Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-01-30 11:25:12 -06:00
Prabhakar Kushwaha
afa2b72b08 powerpc/t4240qds: Print FPGA detail version
Qixis FPGA has tag data contains image name and build date.
It is helpful to identify the FPGA image precisely.

Signed-off-by: York Sun <yorksun@freescale.com>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-01-30 11:25:12 -06:00
Shaveta Leekha
4457e3e678 powerpc/t4240qds: Add support to dump switch settings on t4240qds board
This function is called by "qixis_reset switch" command and
switch settings are calculated from qixis FPGA registers.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-01-30 11:25:11 -06:00
Shaveta Leekha
4354889b9b powerpc/b4860qds: Add support to dump switch settings on b4860qds board
This function is called by "qixis_reset switch" command
and switch settings are calculated from FPGA/qixis registers.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-01-30 11:25:11 -06:00
Shaveta Leekha
c6cef92f63 powerpc/qixis: enable qixis dump command and add switch dumping command
Remove #ifdef so that "qixis dump" command is always available

Add "qixis_reset switch" command to dump switch settings
Qixis doesn't have 1:1 switch mapping. We need to reverse engineer from
registers to figure out switch settings. Not all bits are available.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-01-30 11:25:11 -06:00
York Sun
b5b06fb7b0 powerpc/b4860qds: Added Support for B4860QDS
B4860QDS is a high-performance computing evaluation, development and
test platform supporting the B4860 QorIQ Power Architecture processor.

B4860QDS Overview
------------------
- DDRC1: Ten separate DDR3 parts of 16-bit to support 72-bit (ECC) at 1866MT/s,
  ECC, 4 GB of memory in two ranks of 2 GB.
- DDRC2: Five separate DDR3 parts of 16-bit to support 72-bit (ECC) at 1866MT/s,  ECC, 2 GB of memory. Single rank.
- SerDes 1 multiplexing: Two Vitesse (transmit and receive path) cross-point
  16x16 switch VSC3316
- SerDes 2 multiplexing: Two Vitesse (transmit and receive path) cross-point
  8x8 switch VSC3308
- USB 2.0 ULPI PHY USB3315 by SMSC supports USB port in host mode.
- B4860 UART port is available over USB-to-UART translator USB2SER or over
  RS232 flat cable.
- A Vitesse dual SGMII phy VSC8662 links the B4860 SGMII lines to 2xRJ-45 copper
  connectors for Stand-alone mode and to the 1000Base-X over AMC MicroTCA
  connector ports 0 and 2 for AMC mode.
- The B4860 configuration may be loaded from nine bits coded reset
  configuration reset source. The RCW source is set by appropriate
  DIP-switches:
- 16-bit NOR Flash / PROMJet
- QIXIS 8-bit NOR Flash Emulator
- 8-bit NAND Flash
- 24-bit SPI Flash
- Long address I2C EEPROM
- Available debug interfaces are:
	- On-board eCWTAP controller with ETH and USB I/F
	- JTAG/COP 16-pin header for any external TAP controller
	- External JTAG source over AMC to support B2B configuration
	- 70-pin Aurora debug connector
- QIXIS (FPGA) logic:
	- 2 KB internal memory space including
- IDT840NT4 clock synthesizer provides B4860 essential clocks : SYSCLK,
  DDRCLK1, 2 and RTCCLK.
- Two 8T49N222A SerDes ref clock devices support two SerDes port clocks
  - total four refclk, including CPRI clock scheme

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Sandeep Singh <Sandeep@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-01-30 11:25:11 -06:00
Prabhakar Kushwaha
2ae4e8d958 board/freescale/common:Add support of QTAG register
QIXIS FPGA's QIXIS Tag Access register (QTAG) defines TAG, VER, DATE, IMAGE
fields. These fields have FPGA build version, image name and build date
information.

Add support to parse these fields to have complete FPGA image information.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-01-30 11:25:10 -06:00
Prabhakar Kushwaha
ac13eb5de0 board/T4240qds:Fix TLB and LAW size of NAND flash
The internal SRAM of Freescale's IFC NAND machine is of 64K and controller's
Address Mask Registers is initialised with the same.

So Update TLB and LAW size of NAND flash accordingly.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-01-30 11:25:09 -06:00
Timur Tabi
de757a7af0 powerpc/t4qds: move VSC3316 config data from t4qds.h to t4qds.c
Static variables should be defined in C files, not header files, because
otherwise every C file that #includes the header file will generate a
duplicate of the variables.  Since the vsc3316_xxx[] arrays are only
used by t4qds.c anyway, just put the variables there.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-01-30 11:25:08 -06:00
Shaohui Xie
220d506af3 powerpc/p2041: move Lanes mux to board early init
Lanes mux currently is configured in eth.c when initializing FMAN ethernet
ports, but SRIO and PCIe also need lanes mux, so we move the lanes mux to
p2041rdb.c which implements a board-specific initialization and will be
called at early stage.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-01-30 11:25:08 -06:00
Otavio Salvador
81ca840976 mx23evk: Add initial board support
The following features are supported:
 * 128 MB DDR1 SDRAM
 * DUART
 * SD/MMC Card Socket

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-01-28 11:51:04 +01:00
Marek Vasut
90bc2bf297 mxs: mmc: Allow overriding default card detect implementation
Some MXS based boards do not implement the card-detect signal. Allow
user to specify alternate card-detect implementation.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
2013-01-28 11:43:01 +01:00
Troy Kisky
3236921968 mx6qsabrelite: search mii phy address 4-7
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2013-01-28 06:57:51 +01:00
Troy Kisky
71a988aa63 imximage.cfg: run files through C preprocessor
The '#' used as comments in the files cause the preprocessor
trouble, so change to /* */.

The mkimage command which uses this preprocessor output
was moved to arch/arm/imx-common/Makefile

.gitignore was updated to ignore .cfgtmp files.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2013-01-22 10:20:13 +01:00
Otavio Salvador
bf48fcb61b mxs: clock: Use 'mxs' prefix for methods
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2013-01-21 12:05:20 +01:00
Kim Phillips
a6187dccd8 Merge remote-tracking branch 'mpc83xx/next' 2013-01-16 18:34:09 -06:00
Fabio Estevam
11d80af487 mx51evk: Add DVI output support
Add DVI output support and make it the default video output.

Currently the CLAA WVGA panel is supported, but this panel has to be purchased
separately, so using the DVI output as the default would allow more people to
try the splash screen feature on a mx51evk.

If someone still wants to use the CLAA WVGA, just set the panel variable as:
set panel claa

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-01-13 12:06:35 +01:00
Troy Kisky
abbab70363 mx31/mx35/mx51/mx53/mx6: add watchdog
Use a common watchdog driver for all these cpus.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2013-01-13 11:39:57 +01:00
Fabio Estevam
17c5ef2007 mx53loco: Add support for SEIKO 4.3'' WVGA panel
Add support for the Seiko 4.3'' WVGA panel on mx53loco.

By default, the CLAA WVGA panel is selected.

In order to support the Seiko panel, the enviroment variable 'panel' must be
set to 'seiko'.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-01-09 19:22:24 +01:00
Fabio Estevam
085e728aa5 mx53loco: Improve error handling on power_init()
Make the error handling more robust.

Check if each one of the PMIC writes fail and if they do, just return
immediately.

Also, print the cause for the failures.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-01-05 18:07:53 +01:00
Fabio Estevam
d22925108e mx53loco: Remove unneeded 'retval' variable
commit c73368150 (pmic: Extend PMIC framework to support multiple instances
of PMIC devices) introduced an extra 'retval' variable, but this is not
necessary since we have already the variable 'ret' in place.

So use 'ret' to store the return values from the pmic related calls and remove
'retval'.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-01-05 18:06:12 +01:00
Shawn Guo
de7d02aeba mx6qsabresd: add usdhc2 and usdhc4 support
The on-board number of available usdhc devices is something board
specific.  The patch moves CONFIG_SYS_FSL_USDHC_NUM out of
mx6qsabre_common.h and adds usdhc2 and usdhc4 support for mx6qsabresd
board.

To keep the default mmc device for environment same as before (usdhc3),
it moves CONFIG_SYS_MMC_ENV_DEV out of mx6qsabre_common.h and changes
it to 1 for mx6qsabresd.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-05 18:00:14 +01:00
Ashok
e660c44d9e mx35pdk:Use IMX_GPIO_NR macro
Use IMX_GPO_NR macro

Signed-off-by: Ashok Kumar Reddy <ashokkourla2000@gmail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2013-01-05 17:44:41 +01:00
Fabio Estevam
54bb84115d mx53loco: Call PMIC related functions from board_late_init()
Since commit c733681 (pmic: Extend PMIC framework to support multiple instances
of PMIC devices) mx53loco fails to allocate the memory for PMIC:

U-Boot 2013.01-rc2-dirty (Dec 20 2012 - 15:55:01)

Board: MX53 LOCO
I2C:   ready
DRAM:  1 GiB
pmic_alloc: No available memory for allocation!
pmic_init: POWER allocation error!
CPU:   Freescale i.MX53 family rev2.0 at 800 MHz
Reset cause: POR
MMC:   FSL_SDHC: 0, FSL_SDHC: 1

Calling the PMIC related functions at a later stage, ie, from board_late_init()
fixes the issue.

Reported-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Tested-by: Stefano Babic <sbabic@denx.de>
2012-12-27 11:03:43 +01:00
Scott Wood
22f4442d12 powerpc/mpc83xx: convert MPC8313ERDB to new-SPL
This converts MPC8313ERDB NAND boot to use the new SPL infrastructure.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2012-12-19 17:45:54 -06:00
Fabio Estevam
8965112bbf mx53loco: Fix PMIC name
commit c73368150 (pmic: Extend PMIC framework to support multiple instances
of PMIC devices) has incorrectly passed the PMIC name under the FSL PMIC case.

Fix that by passing "FSL_PMIC" as the parameter of pmic_get.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-12-13 09:22:55 +01:00
Fabio Estevam
cabe240b59 mx25pdk: Adapt it for the new PMIC framework
Make the necessary adaptions for the new PMIC framework, so that mx25pdk can
be built again.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-12-11 17:41:19 +01:00
Stefano Babic
05a860c228 Merge branch 'master' of git://git.denx.de/u-boot into master
Conflicts:
	drivers/power/power_fsl.c
	include/configs/mx35pdk.h
	include/configs/mx53loco.h
	include/configs/woodburn_common.h
	board/woodburn/woodburn.c

These boards still use the old old PMIC framework, so they
do not merge properly after the power framework was merged into
mainline.

Fix all conflicts and update woodburn to use Power Framework.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2012-12-08 12:02:45 +01:00
York Sun
765ad3cf4d powerpc/corenet_ds: Update DDR timing for single-rank DIMMs
Single rank UDIMM timing has been verified with HMT325U7BFR8C-H9 for speed
800, 900, 1000, 1200, 1300MT/s.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-11-27 18:28:06 -06:00
Timur Tabi
d31e53b42c powerpc/85xx: add support for the Freescale P5040DS Superhydra reference board
The P5040DS reference board (a.k.a "Superhydra") is an enhanced version of
P3041DS/P5020DS ("Hydra") reference board.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-11-27 18:28:06 -06:00
Andy Fleming
e76cd5d4cf 8xxx: Change all 8*xx_DDR addresses to 8xxx
There were a number of shared files that were using
CONFIG_SYS_MPC85xx_DDR_ADDR, or CONFIG_SYS_MPC86xx_DDR_ADDR, and
several variants (DDR2, DDR3). A recent patchset added
85xx-specific ones to code which was used by 86xx systems.
After reviewing places where these constants were used, and
noting that the type definitions of the pointers assigned to
point to those addresses were the same, the cleanest approach
to fixing this problem was to unify the namespace for the
85xx, 83xx, and 86xx DDR address definitions.

This patch does:

s/CONFIG_SYS_MPC8.xx_DDR/CONFIG_SYS_MPC8xxx_DDR/g

All 85xx, 86xx, and 83xx have been built with this change.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Tested-by: Andy Fleming <afleming@freescale.com>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
2012-11-27 17:45:17 -06:00
Scott Wood
13d1143ffb powerpc/mpc85xx/p2020rdb-pca: Use L2 SRAM for SPL boot
This allows DDR configuration to be deferred to the final U-Boot image,
which is able to make use of SPD data.  The SPL itself cannot use SPD due
to code size constraints.  It previously used fixed register values for
DDR configuration, and those values did not work on the p2020rdb-pca
board I tested with.  It's possible that different revisions of the board
require different settings.  Using SPD eliminates that problem.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: Andy Fleming <afleming@freescale.com>
2012-11-26 15:41:27 -06:00
Scott Wood
d674bccf73 powerpc/mpc85xx/p1_p2_rdb_pc: clean up memory map
- Sort by address, and fix column alignment

- Don't label things as localbus that aren't.  Instead, put chipselect
  info at the end of the description for localbus windows.  Note that
  NAND/NOR have their chipselects swapped when booting from NAND, and CS2
  can be either PMC or VSC7385 depending on hwconfig.

- Shrink NAND to the 32K that's actually mapped in the localbus

- Assign an address and size to L2 SRAM.  Remove the similarly named
  but unintelligible "L2 SDRAM(REV.)".

- Remove the untrue comment about L1 stack being mapped with TLB0.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: Andy Fleming <afleming@freescale.com>
2012-11-26 15:41:26 -06:00