Commit Graph

1546 Commits

Author SHA1 Message Date
Benedikt Grassl
942b5fc032 mmc: zynq: parse dt when probing
Currently, the entry "bus-width = <8>" in the ZynqMP's sdhci nodes
is not evaluated. This results in the bus width staying at its default
value (4 bit in HS200 mode).
Fix this by calling mmc_of_parse. This function also checks for the
"no-1-8-v" and "max-frequency" entries. Remove the handling of those
nodes from this driver.

Signed-off-by: Benedikt Grassl <Benedikt.Grassl@rohde-schwarz.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-27 13:53:13 +02:00
Simon Glass
3a905cd231 dm: mmc: Update mmc_get_mmc_dev() to use const *
This function does not modify the device to change it to use const *, so
that callers with a const udevice * can call it without a cast.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-04-24 16:40:09 -04:00
Heinrich Schuchardt
2448c34f9f drivers: mmc: rpmb: do not build for SPL
RPMB support is used by the 'mmc rpmb' command and by the OP-TEE support.
We do not need it in SPL.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-04-22 20:41:57 +08:00
Marek Vasut
4a66d4ee33 mmc: tmio: sdhi: Implement get_b_max function
Implement get_b_max() for the Renesas R-Car SDHI controller driver, limit
the b_max per hardware capabilities such that select Gen2 controllers have
16bit block transfer limit, the rest has 32bit block transfer limit and on
Gen3, the block transfer limit on addresses above the 32bit boundary is set
to 1/4 of the malloc area.

Originally, on Gen3, the block transfers above the 32bit area were limited
to PIO only, which resulted in (R8A7795 Salvator-X , HS200 eMMC):
  => time mmc read 0x0000000700000000 0 0x10000
  time: 0.151 seconds
  => time mmc read 0x0000000700000000 0 0x100000
  time: 11.090 seconds
with bounce buffer in place and b_max adjustment in place:
  => time mmc read 0x0000000700000000 0 0x10000
  time: 0.156 seconds
  => time mmc read 0x0000000700000000 0 0x100000
  time: 2.349 seconds

Note that the bounce buffer does mallocate and free the bounce buffer
for every transfer. Experiment which removes this results in further
increase of read speed, from 2.349s to 2.156s per 512 MiB of data,
which is not such a significant improvement anymore. It might however
be interesting to have bounce buffer directly in the MMC core or even
block core.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
2020-04-22 20:41:56 +08:00
Marek Vasut
145429aac0 mmc: Add option to adjust b_max before long read
Add getter function which permits adjusting the maximum number of
blocks that could be read in a single sustained read transfer based
on the location of the source/target buffer and length, before such
transfer starts.

This is mainly useful on systems which have various DMA restrictions
for different memory locations, e.g. DMA limited to 32bit addresses,
and where a bounce buffer is used to work around such restrictions.
Since the U-Boot bounce buffer is mallocated, it's size is limited
by the malloc area size, and the read transfer to such a buffer must
also be limited. However, as not all areas are limited equally, the
b_max should be adjusted accordinly as needed to avoid degrading
performance unnecessarily.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
2020-04-22 20:41:56 +08:00
Marek Vasut
d2661d8e9f mmc: tmio: sdhi: Use bounce buffer to avoid DMA limitations
The R-Car SDHI DMA controller has various restrictions. To work around
those restrictions without falling back to PIO, implement bounce buffer
with custom alignment check function which tests for those limitations.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
2020-04-22 20:41:56 +08:00
Rayagonda Kokatanur
29617ca39a drivers: mmc: iproc_sdhci: move host.mmc init before sdhci_setup_cfg
move host.mmc before sdhci_setup_cfg

Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com>
2020-04-22 20:41:55 +08:00
Rayagonda Kokatanur
7a65b8b6bb drivers: mmc: iproc_sdhci: fix compilation warning
set_ios_post return type changed from void to int, correcting
the same to fix compilation warning.

Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com>
2020-04-22 20:41:55 +08:00
Bharat Kumar Reddy Gooty
2bb02b1a81 drivers: mmc: iproc_sdhci: enable broken R1B response quirk
Enable SDHCI_QUIRK_BROKEN_R1B quirk.

Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com>
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
2020-04-22 20:41:55 +08:00
Bharat Kumar Reddy Gooty
d5b8500f03 drivers: mmc: iproc_sdhci: fix possible memory leak
Free the pointer variable 'iproc_sdhci' upon failure to fix
possible memory leak.

Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com>
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
2020-04-22 20:41:55 +08:00
Heinrich Schuchardt
0469d84636 cmd: mmc: provide boot area protection command
Provide command 'mmc wp' to power on write protect boot areas on eMMC
devices.

The B_PWR_WP_EN bit in the extended CSD register BOOT_WP is set. The boot
area are write protected until the next power cycle occurs.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-22 20:41:55 +08:00
Heinrich Schuchardt
1601ea2126 mmc: export mmc_send_ext_csd()
Export function mmc_send_ext_csd() for reading the extended CSD register.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-22 20:41:54 +08:00
Hiroyuki Yokoyama
902af10d67 mmc: tmio: sdhi: Add DMA transfer address alignment check at writing
In R-Car Gen 3, there is a DMA controller restriction of SDHI.
When the transfer exceeding the 4 kByte boundary is performed while
the DRAM address is not 128 byte aligned, the bus is occupied.
This patch avoids this.

Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-04-21 10:12:15 +08:00
Jerome Brunet
0392416fb1 mmc: meson-gx: enable input clocks
Until now, the mmc clock was left in a good enough state by the ROM
code to be used by the controller. However on some SoC, if the ROM
code finds a bootloader on USB or SPI, it might leave the MMC clock
in state the controller cannot work with.

Enable the input clocks provided to the mmc controller. While the
u-boot mmc controller driver is not doing fancy settings like the Linux,
it at least needs to make these clocks are running.

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-06 09:56:35 +02:00
Tom Warren
a482f32992 mmc: t210: Fix 'bad' SD-card clock when doing 400KHz card detect
According to the HW team, for some reason the normal clock select code
picks what appears to be a perfectly valid 375KHz SD card clock, based
on the CAR clock source and SDMMC1 controller register settings (CAR =
408MHz PLLP0 divided by 68 for 6MHz, then a SD Clock Control register
divisor of 16 = 375KHz). But the resulting SD card clock, as measured by
the HW team, is 700KHz, which is out-of-spec. So the WAR is to use the
values given in the TRM PLLP table to generate a 400KHz SD-clock (CAR
clock of 24.7MHz, SD Clock Control divisor of 62) only for SDMMC1 on
T210 when the requested clock is <= 400KHz. Note that as far as I can
tell, the other requests for clocks in the Tegra MMC driver result in
valid SD clocks.

Signed-off-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-04-02 14:30:01 -07:00
Tom Warren
5e965e8140 mmc: t210: Add autocal and tap/trim updates for SDMMC1/3
As per the T210 TRM, when running at 3.3v, the SDMMC1 tap/trim and
autocal values need to be set to condition the signals correctly before
talking to the SD-card. This is the same as what's being done in CBoot,
but it gets reset when the SDMMC1 HW is soft-reset during SD driver
init, so needs to be repeated here. Also set autocal and tap/trim for
SDMMC3, although no T210 boards use it for SD-card at this time.

Signed-off-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-04-02 14:30:01 -07:00
Faiz Abbas
a851213920 mmc: am654_sdhci: Implement workaround for card detect
The 4 bit MMC controllers have an internal debounce for the SDCD line
with a debounce delay of 1 second. Therefore, after clocks to the IP are
enabled, software has to wait for this time before it can power on the
controller.

Add a deferred_probe() callback which polls on sdcd for a maximum of 2 seconds
before switching on power to the controller or (in the case of no card)
returning a ENOMEDIUM. This pushes the 1 second wait time to when the
card is actually needed rather than at every probe() making sure that
users who don't insert an SD card in the slot don't have to wait such a
long time.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-03-09 08:33:16 +08:00
Faiz Abbas
c7d106b4eb mmc: am654_sdhci: Update output tap delay writes
With the latest RIOT, there is a different otap delay value for each
speed mode. Add a new binding with every supported speed mode. Also
disable a given speed mode in the host caps if its corresponding
otap-del-sel is not present.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-03-09 08:33:16 +08:00
Faiz Abbas
e8d5dde447 mmc: Merge SD_LEGACY and MMC_LEGACY bus modes
MMC_LEGACY & SD_LEGACY are not differentiated timings in the spec and
don't have any meaningful differences. Therefore, get rid of all
references to SD_LEGACY and use MMC_LEGACY to mean both of them.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-03-09 08:33:16 +08:00
Faiz Abbas
cb884347f4 sdhci: Add sdhci_deferred_probe() API
Add the sdhci_deferred_probe() function to register as the
deferred_probe() callback to the mmc core. It will in turn call the
deferred_probe() callback of the platform drivers as declared in the
sdhci_ops.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-03-09 08:33:16 +08:00
Faiz Abbas
32860bdbc1 mmc: Add a deferred_probe() API
Add a deferred_probe() API for platforms that want to do some
configurations just before starting to enumerate the device.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-03-09 08:33:15 +08:00
Arthur Li
d55e4e74ce mmc: ca_dw_mmc: add DesignWare based DM support for CAxxxx SoCs
Initial DesignWare based DM support for Cortina Access CAxxxx SoCs.

Signed-off-by: Arthur Li <arthur.li@cortina-access.com>
Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
2020-03-09 08:33:13 +08:00
Masahiro Yamada
4155ad9aac mmc: sdhci: fix missing cache invalidation after reading by DMA
This driver currently performs cache operation before the DMA start,
but does nothing after the DMA completion.

When reading data by DMA, the cache invalidation is needed also after
finishing the DMA transfer. Otherwise, the CPU might read data from
the cache instead of from the main memory when speculative memory read
or memory prefetch occurs.

Instead of calling the cache operation directly, this commit adds
dma_unmap_single(), which performs cache invalidation internally,
but drivers do not need which operation is being run.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-20 15:09:57 +08:00
Masahiro Yamada
58d8ace12b mmc: sdhci: use dma_map_single() instead of flush_cache() before DMA
Currently, sdhci_prepare_dma() calls flush_cache() regardless of the
DMA direction.

Actually, cache invalidation is enough when reading data from the device.

This is correctly handled by dma_map_single(), which mimics the DMA-API
in Linux kernel. Drivers can be agnostic which cache operation occurs
behind the scene.

This commit also sanitizes the difference between the virtual address
and the dma address.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-20 15:09:57 +08:00
Masahiro Yamada
fdd84c8be4 mmc: sdhci: remove unneeded casts
host->mmc is already (struct mmc *).

memalign() returns an opaque pointer, so there is no need for casting.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-02-20 15:09:56 +08:00
Masahiro Yamada
a2b0221c9c mmc: sdhci: use lower_32_bit2() and upper_32_bits() for setting adma_addr
Use {lower,upper}_32_bits() instead of the combination of cast
and shift.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-02-20 15:09:55 +08:00
Masahiro Yamada
f5df6aa1e6 mmc: sdhci: reduce code duplication for aligned buffer
The same code is run for both SDHCI_QUIRK_32BIT_DMA_ADDR and
define(CONFIG_FIXED_SDHCI_ALIGNED_BUFFER).

Unify the code.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-02-20 15:09:55 +08:00
Masahiro Yamada
c8cc18b7a7 mmc: sdhci: put the aligned buffer pointer to struct sdhci_host
Using the global variable does not look nice.

Add a new field sthci::align_buffer to point to the bounce buffer.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-02-20 15:09:54 +08:00
Masahiro Yamada
9d86b89c59 dma-mapping: move dma_map_(un)single() to <linux/dma-mapping.h>
The implementation of dma_map_single() and dma_unmap_single() is
exactly the same for all the architectures that support them.

Factor them out to <linux/dma-mapping.h>, and make all drivers to
include <linux/dma-mapping.h> instead of <asm/dma-mapping.h>.

If we need to differentiate them for some architectures, we can
move the generic definitions to <asm-generic/dma-mapping.h>.

Add some comments to the helpers. The concept is quite similar to
the DMA-API of Linux kernel. Drivers are agnostic about what is
going on behind the scene. Just call dma_map_single() before the
DMA, and dma_unmap_single() after it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-19 21:27:30 +08:00
Masahiro Yamada
950c596867 dma-mapping: fix the prototype of dma_unmap_single()
dma_unmap_single() takes the dma address, not virtual address.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-19 21:27:30 +08:00
Rasmus Villemoes
ede2822864 mmc: fsl_esdhc: actually enable cache snooping on mpc830x
The reference manuals for MPC8308 and MPC8309 both say that the
esdhcctl aka DMA Control Register "is implemented as SDHCCR" in the
System configuration registers. Unfortunately, that doesn't mean that
the registers are just mirrors of each other - any write to esdhcctl
is simply ignored. So to actually enable cache snooping, we
unfortunately have to add a little ifdeffery.

There is, naturally, no description of the bit fields of esdhcctl in
the MPC8309 manual, but comparing the description of esdhcctl from the
LS1021A reference manual to the description of the sdhccr in MPC8309,
one also finds that the fields are bit-reversed, so the bit to set is
0x02000000 rather than 0x00000040 - this is also what board_mmc_init()
uses in the two gdsys/mpc8308/ boards.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-02-19 21:21:42 +08:00
Masahiro Yamada
76ca2d1303 mmc: remove unneeded forward declarations
These functions are defined before the callers.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-02-17 14:55:04 +08:00
Masahiro Yamada
8adf50effe mmc: check the return value of mmc_select_mode_and_width()
Since commit 01298da31d ("mmc: Change mode when switching to a boot
partition"), errors in mmc_select_mode_and_width() are ignored.
The return value should be checked.

Fixes: 01298da31d ("mmc: Change mode when switching to a boot partition")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-02-17 14:55:04 +08:00
Masahiro Yamada
54a78cbdbe mmc: sdhci-cadence: send tune request twice to work around errata
Cadence sent out an errata report to their customers of this IP.
This errata is not so severe, but the tune request should be sent
twice to avoid the potential issue.

Quote from the report:

Problem Summary
---------------
The IP6116 SD/eMMC PHY design has a timing issue on receive data path.
This issue may lead to an incorrect values of read/write pointers of
the synchronization FIFO. Such a situation can happen at the SDR104
and HS200 tuning procedure when the PHY is requested to change a phase
of sampling clock when moving to the next tuning iteration.

Workarounds
-----------
The following are valid workarounds to resolve the issue:

1. In eMMC mode, software sends tune request twice instead of once at
   each iteration. This means that the clock phase is not changed on
   the second request so there is no potential for clock instability.
2. In SD mode, software must not use the hardware tuning and instead
   perform an almost identical procedure to eMMC, using the HRS34 Tune
   Force register.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-17 14:55:04 +08:00
Jaehoon Chung
4af6659605 mmc: fix the build error when MMC_WRITE is disabled
erase_grp_size is used, when MMC_WRITE is enabled.
- error: ‘struct mmc’ has no member named ‘erase_grp_size’

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-02-17 14:55:04 +08:00
Bharat Kumar Reddy Gooty
ae93d8106b drivers: mmc: rpmb: Use R1 response
If the host has Broken R1B, use only R1 response type.

Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com>
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
2020-02-17 14:55:04 +08:00
Simon Glass
336d4615f8 dm: core: Create a new header file for 'compat' features
At present dm/device.h includes the linux-compatible features. This
requires including linux/compat.h which in turn includes a lot of headers.
One of these is malloc.h which we thus end up including in every file in
U-Boot. Apart from the inefficiency of this, it is problematic for sandbox
which needs to use the system malloc() in some files.

Move the compatibility features into a separate header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00
Simon Glass
61b29b8268 dm: core: Require users of devres to include the header
At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-02-05 19:33:46 -07:00
Tom Rini
3e12744a90 Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-samsung
- Various exynos fixes
2020-01-28 21:10:32 -05:00
Vignesh Raghavendra
eaa8b04da3 mmc: tmio-common: Drop custom dma mapping functions
Drop local dma_map_single() and dma_unmap_single() and use arch specific
common implementation

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-01-25 12:04:36 -05:00
Marek Szyprowski
e27108c433 mmc: s5p_sdhci: Read generic MMC properties from DT
Read generic MMC properties from device-tree. This allows to specify for
example cd-inverted property and let MMC core to properly handle such
case.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2020-01-23 11:43:10 +09:00
Tom Rini
07add22cab Merge tag '2020-01-20-ti-2020.04' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti
K3 J721E:
* DMA support.
* MMC and ADMA support.
* EEPROM support.
* J721e High Security EVM support.
* USB DT nodes

K3 AM654:
* Fixed boot due to pmic probe error.
* USB support and DT nodes.
* ADMA support

DRA7xx/AM57xx:
* BBAI board support
* Clean up of net platform code under board/ti

AM33/AM43/Davinci:
* Reduce SPL size for omap3 boards.
* SPL DT support for da850-lcdk
* PLL divider fix for AM335x
2020-01-20 14:54:55 -05:00
Faiz Abbas
a20008eabd mmc: am654_sdhci: Add Support for configuring PHY in J721e
Add Support for writing to PHY registers for J721e. There are number of
differences between the J721e 8 bit PHY, J721e 4 bit PHY and AM654 PHY.
Create a driver_data structure with an ops and flags field and use the
flags field to indicate these differences. The differences are as
follows:

1. The J721e 4 bit instance PHY does not have a DLL. Introduce a
DLL_PRESENT flag to make sure that DLL related registers are accessed
only where they are present. Also add a separate set_ios_post()
callback.

2. The J721e 8 bit instance is not muxed with anything else inside the
SoC and hence the IOMUX_ENABLE filed does not exist. Add a flag which is
used to indicate the presence of this field.

3. The register field used to select DLL frequency is 3 bit wide in
J721e as compared to 2 bits in AM65x. Add another flag that
distinguishes these fields.

4. The strobe select field is 8 bit wide as compared to 4 bit wide for
AM65x. Add yet another flag to indicate this difference. Strobe select
is used only for HS400 speed mode, support for which has not been added
in AM65x.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Faiz Abbas
fe0e30c7ba mmc: am654_sdhci: Get Xin clock by name
Get clk_xin by name instead of by index to avoid having to put clocks in
the same order in all devices.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Simon Glass
db41d65a97 common: Move hang() to the same header as panic()
At present panic() is in the vsprintf.h header file. That does not seem
like an obvious choice for hang(), even though it relates to panic(). So
let's put hang() in its own header.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Migrate a few more files]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-17 17:53:40 -05:00
Tom Rini
d7bb6aceb2 Merge tag 'mmc-1-16-2020' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmc
- Cleanup of fsl_esdhc driver together with arch/defconfig change
- Add quirk for APP_CMD retry
2020-01-16 13:20:51 -05:00
Sam Shih
25273dbd57 mmc: add mmc and sd support for MT7622
This patch add mmc and sd support for Mediatek MT7622 SoCs

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16 09:39:45 -05:00
mingming lee
fb80eaa9d8 mmc: mtk-sd: fix hang when data read quickly
For CMD21 tuning data, the 128/64 bytes data may coming in very
short time, before msdc_start_data(), the read data has already
come, in this case, clear MSDC_INT will cause the interrupt disappear
and lead to the thread hang.

the solution is just clear all interrupts before command was sent.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-16 09:39:45 -05:00
mingming lee
3b0397d48b mmc: mtk-sd: add support for MediaTek MT8512/MT8110 SoCs
This patch adds mmc support for MediaTek MT8512/MT8110 SoCs.
MT8512/MT8110 SoCs puts the tune register at top layer, so
need add new code to support it.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-16 09:39:45 -05:00
Joel Johnson
26632b7541 mmc: config help typo fix
Fix typo in description of MMC_QUIRKS config option.

Signed-off-by: Joel Johnson <mrjoel@lixil.net>
2020-01-16 13:21:01 +08:00