Commit Graph

63 Commits

Author SHA1 Message Date
Alexander Merkle
dd8d8da3d7 Fix typo choosen in comments and printf logs
Minor change: chosen is written with one "o".
No code change here, only comment & printf.

Signed-off-by: Alexander Merkle <alexander.merkle@lauterbach.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-27 09:12:23 -04:00
Shengzhou Liu
dd8e740c78 driver/ddr/fsl: Add workaround for erratum A-009803
During initial DDR training, false parity errors may be detected.
This patch adds workaround to fix the erratum.
Tested on LS2085QDS and LS2080RDB.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-03-21 12:42:13 -07:00
Shengzhou Liu
eb118807a4 driver/ddr/fsl: Add address parity support for DDR4 UDIMM/discrete
Add support of address parity for DDR4 UDIMM or discrete memory.
It requires to configurate corresponding MR5[2:0] and
TIMING_CFG_7[PAR_LAT]. Parity can be turned on by hwconfig,
e.g. hwconfig=fsl_ddr:parity=on.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-03-21 12:42:13 -07:00
Ed Swarthout
81dfdee0dc drivers/ddr/fsl: fsl_ddr_sdram_size remove unused controllers
Following commit 61bd2f75, exclude unused DDR controller from
calculating RAM size for SPL boot.

Signed-off-by: Ed Swarthout <Ed.Swarthout@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-25 08:24:16 -08:00
Shengzhou Liu
a994b3deb0 driver/ddr/fsl: Add workaround for A009663
Erratum A-009663 workaround requires to set DDR_INTERVAL[BSTOPRE] to 0
before setting DDR_SDRAM_CFG[MEM_EN] and set DDR_INTERVAL[BSTOPRE]
to the desired value after DDR initialization has completed.

When DDR controller is configured to operate in auto-precharge
mode(DDR_INTERVAL[BSTOPRE]=0), this workaround is not needed.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-25 08:24:15 -08:00
Shengzhou Liu
0d3972cfcd fsl/ddr: Add workaround for ERRATUM_A009942
During the receive data training, the DDRC may complete on a
non-optimal setting that could lead to data corruption or
initialization failure.

Workaround: before setting MEM_EN, set DEBUG_29 register with
specific value for different data rates.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-25 08:24:14 -08:00
Tom Rini
5b8031ccb4 Add more SPDX-License-Identifier tags
In a number of places we had wordings of the GPL (or LGPL in a few
cases) license text that were split in such a way that it wasn't caught
previously.  Convert all of these to the correct SPDX-License-Identifier
tag.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-01-19 08:31:21 -05:00
Yao Yuan
000f4e7686 move erratum a008336 and a008514 to soc specific file
As the errata A008336 and A008514 do not apply to all LS series SoCs
(such as LS1021A, LS1043A) we move them to an soc specific file

Signed-off-by: Yuan Yao <yao.yuan@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-12-15 08:57:32 +08:00
Shengzhou Liu
a46b1852de fsl/ddr: updated ddr errata-A008378 for arm and power SoCs
DDR errata-A008378 applies to LS1021-20-22A-R1.0, T1023-R1.0,
T1024-R1.0, T1040-42-20-22-R1.0/R1.1, it has been fixed on
LS102x Rev2.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-12-13 18:27:28 -08:00
York Sun
6c6e006a20 driver/ddr/fsl: Update timing config for heavy load
In case four chip-selects are all active, the turnaround times need to
increase to avoid overlapping under heavy load.

Signed-off-by: York Sun <yorksun@freescale.com>
2015-12-13 18:27:27 -08:00
York Sun
7cc079989d driver/ddr/fsl: Update workaround for A008511 for vref range
The workaround requires different setting for range 1 vs 2.
Also adjust timeout value for waiting for controller to be idle.

Signed-off-by: York Sun <yorksun@freescale.com>
2015-12-13 18:27:27 -08:00
York Sun
8a51429e00 driver/ddr/fsl: Update MR5 RTT park
For four chip-selects enabled case, RTT is parked on all of them.

Signed-off-by: York Sun <yorksun@freescale.com>
2015-12-13 18:27:27 -08:00
York Sun
0fb7197436 driver/ddr/fsl: Update DDR4 MR6 for Vref range
MR6 bit 6 is set accrodingly for range 1 or 2, per JEDEC spec.

Signed-off-by: York Sun <yorksun@freescale.com>
2015-12-13 18:27:27 -08:00
York Sun
19601dd99c driver/ddr/fsl: Update DDR4 RTT values
DDR4 has different RTT value and code according to JEDEC spec. Update
the macros and options .

Signed-off-by: York Sun <yorksun@freescale.com>
2015-12-13 18:27:27 -08:00
York Sun
da305b9f57 drivers/ddr/fsl: Fix typo in BIST test for DDR4
BIST test code has a typo, resulting the binding registers not
maintained as expected. This typo results BIST runs twice on
the covered memory.

Signed-off-by: York Sun <yorksun@freescale.com>
Reported-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
2015-11-30 09:11:12 -08:00
York Sun
61bd2f75f5 drivers/ddr/fsl: Enable detection of one DDR controller operation for LSCH3
Freescale LSCH3 platforms use two DDR controlers interleaving mode out of
reset. It can be configured to disable one controller. To support this
operation, the driver needs to detect and skip the disabled controller.

Signed-off-by: York Sun <yorksun@freescale.com>
2015-11-30 09:11:11 -08:00
Prabhakar Kushwaha
06b5301043 armv8: ls2085a: Add support of LS2085A SoC
Freescale's LS2085A is a another personality of LS2080A SoC with
support of AIOP and DP-DDR.
This Patch adds support of LS2085A Personality.

Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
[York Sun: Updated MAINTAINERS files
           Dropped #ifdef in cpu.h
           Add CONFIG_SYS_NS16550=y in defconfig]
Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-30 09:10:47 -08:00
Prabhakar Kushwaha
449372148f armv8: LS2080A: Rename LS2085A to reflect LS2080A
LS2080A is a prime personality of Freescale’s LS2085A. It is a non-AIOP
personality without support of DP-DDR, L2 switch, 1588, PCIe endpoint etc.
So renaming existing LS2085A code base to reflect LS2080A (Prime personality)

Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
[York Sun: Dropped #ifdef in cpu.c for cpu_type_list]
Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-30 08:53:04 -08:00
Tom Rini
da58dec866 Various Makefiles: Add SPDX-License-Identifier tags
After consulting with some of the SPDX team, the conclusion is that
Makefiles are worth adding SPDX-License-Identifier tags too, and most of
ours have one.  This adds tags to ones that lack them and converts a few
that had full (or in one case, very partial) license blobs into the
equivalent tag.

Cc: Kate Stewart <kstewart@linuxfoundation.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-11-10 09:19:52 -05:00
Joakim Tjernlund
e368c20607 drivers/ddr/fsl_ddr: Make SR_IE configurable
SR_IE(Self-refresh interrupt enable) is needed for
Hardware Based Self-Refresh. Make it configurable and let
board code handle the rest.

Signed-off-by: Joakim Tjernlund <joakim.tjernlund@transmode.se>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-30 09:19:41 -07:00
York Sun
56848428a8 drivers/ddr/fsl: Adjust bstopre value
By default the bstopre value has been set to 0x100, used to be 1/4
value of refint. Modern DDR has increased the refresh time. Adjust
to 1/4 of refresh interval dynamically. Individual board can still
override this value in board ddr file, or to use auto-precharge.

Signed-off-by: York Sun <yorksun@freescale.com>
2015-08-03 12:06:38 -07:00
York Sun
b92557cd3f driver/ddr/fsl: Add a hook to update SPD address
In case SPD address changes between board revisions, updating SPD
address can be called from board file.

Signed-off-by: York Sun <yorksun at freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
2015-07-20 11:44:35 -07:00
York Sun
9f9f009373 driver/ddr/fsl: Add workaround for DDR erratum A008511
This erratum only applies to general purpose DDR controllers in LS2.
It shouldn't be applied to DP-DDR controller. Check DDRC versoin number
before applying workaround.

Signed-off-by: York Sun <yorksun@freescale.com>
2015-04-23 08:55:54 -07:00
York Sun
4516ff8160 driver/ddr/fsl: Add built-in memory test for DDR4 driver
Add built-in memory test to catch errors after DDR is initialized, before
any other transactions. To enable this test, define CONFIG_FSL_DDR_BIST.
An environmental variable "ddr_bist" is checked before starting test.
It takes a while (several seconds) depending on system memory size.

Signed-off-by: York Sun <yorksun@freescale.com>
2015-04-23 08:55:53 -07:00
York Sun
6b95be2280 driver/ddr/fsl: Fix driver to support empty first slot
CS0 was not allowed to be empty by u-boot driver in the past to simplify
the driver. This may be inconvenient for some debugging. This patch lifts
the restrictions. Controller interleaving still requires CS0 populated.

Signed-off-by: York Sun <yorksun@freescale.com>
2015-04-23 08:55:53 -07:00
York Sun
66869f9554 drivers/ddr/fsl: Update DDR driver for DDR4
Add/update registers for DDR4, including DQ mappings. Allow raw timing
method used for all controllers. Update mode_9 register to 0x500 for
improved stability. Check DDR controller version number individually
in case a SoC has multiple DDR controllers of different versions.
Increase read-write turnaround for DDR4 high speeds.

Signed-off-by: York Sun <yorksun@freescale.com>
2015-04-23 08:55:53 -07:00
Curt Brune
d7c865bdf2 MPC8541/MPC8555: Enable SS_EN in DDR_SDRAM_CLK_CNLT register
According to the MPC8555/MPC8541 reference manual the SS_EN (source
synchronous enable) bit in the DDR_SDRAM_CLK_CNLT register must be set
during initialization.

>From section 9.4.1.8 of that manual:

   Source synchronous enable. This bit field must be set during
   initialization. See Section 9.6.1, "DDR SDRAM Initialization
   Sequence," details.

   0 - Reserved
   1 - The address and command are sent to the DDR SDRAMs source
       synchronously.

In addition, Freescale application note AN2805 is also very clear that
this bit must be set.

This patch reverts a change introduced by commit
457caecdbc.

Testing Done:

Compiled targets CONFIG_TARGET_MPC8555CDS and CONFIG_TARGET_MPC8541CDS
and inspected the generated assembly code to verify the SS_EN bit was being
set.  There is one extra instruction emitted:

  fff9b774: 65 29 80 00  oris    r9,r9,32768

Compiled the CONFIG_TARGET_MPC8548CDS target and verified that no
additional instructions were emitted related to this patch.

Booted an image on a MPC8541 based board successfully.

Signed-off-by: Curt Brune <curt@cumulusnetworks.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-04-20 10:15:28 -07:00
York Sun
e32d59a2fa driver/ddr/fsl: Add sync of refresh
Add sync of refresh for multiple DDR controllers. DDRC initialization
needs to complete first. Code is re-ordered to keep refresh close.

Signed-off-by: York Sun <yorksun@freescale.com>
2015-02-24 13:09:42 -08:00
York Sun
dc1437afd7 driver/ddr/fsl: Fix a typo in timing_cfg_8 calculation
wwt_bg should match rrt_bg. It was a typo in driver.

Signed-off-by: York Sun <yorksun@freescale.com>
2015-02-24 13:09:26 -08:00
York Sun
03e664d8f4 driver/ddr/fsl: Add support for multiple DDR clocks
Controller number is passed for function calls to support individual
DDR clock, depending on SoC implementation. It is backward compatible
with exising platforms. Multiple clocks have been verifyed on LS2085A
emulator.

Signed-off-by: York Sun <yorksun@freescale.com>
2015-02-24 13:09:18 -08:00
York Sun
49fd1f3f26 driver/ddr/fsl: Add workround for erratumn A008514
Erratum A008514 workround requires writing register eddrtqcr1 with
value 0x63b20002.

Signed-off-by: York Sun <yorksun@freescale.com>
2015-02-24 13:09:10 -08:00
York Sun
9955b4ab01 driver/ddr/fsl: Add workaround for A008336
Erratum A008336 requires setting EDDRTQCR1[2] in DDRC DCSR space
for 64-bit DDR controllers.

Signed-off-by: York Sun <yorksun@freescale.com>
2015-02-24 13:09:06 -08:00
York Sun
1f3402e729 driver/ddr/fsl: Adjust CAS to preamble override for emulator
On ZeBu emulator, CAS to preamble overrides need to be set to
satisfy the timing. This only impact platforms with CONFIG_EMU.

These should be set before MEM_EN is set.

Signed-off-by: York Sun <yorksun@freescale.com>
2015-02-24 13:09:02 -08:00
York Sun
dda3b610ee arm/ls1021a: Add workaround for DDR erratum A008378
Internal memory controller counters can reach a bad state after
training in DDR4 mode if accumulated ECC or DBI mode is eanbled.

Signed-off-by: York Sun <yorksun@freescale.com>
2015-01-23 22:29:13 -06:00
York Sun
938bbb6013 driver/ddr/fsl: Fix MRC_CYC calculation for DDR3
For DDR controller version 4.7 or newer, MRC_CYC (mode register set
cycle time) is max(tMRD, tMOD). tMRD is 4nCK, or 8nCK (RDIMM). tMOD
is max(12nCK, 15ns) according to JEDEC spec.

DDR4 is not affected by this change.

Signed-off-by: York Sun <yorksun@freescale.com>
2014-12-15 09:15:12 -08:00
Tang Yuantian
a7787b7850 fsl/sleep: updated the deep sleep framework for QorIQ platforms
With the introducing of generic board and ARM-based cores, current
deep sleep framework doesn't work anymore.
This patch will convert the current framework to adapt this change.
Basically it does:
1. Converts all the Freescale's DDR driver to support deep sleep.
2. Added basic framework support for ARM-based and PPC-based
cores separately.

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-12-11 09:41:18 -08:00
York Sun
789b3447c0 driver/ddr/fsl: Add workaround for faulty SPD
Some UDIMMs have faulty SPD with wrong mapping for DQ[36-39].
Using raw card spec in case this error is detected.

Signed-off-by: York Sun <yorksun@freescale.com>
2014-12-05 08:06:14 -08:00
York Sun
84baed2a2b driver/ddr/fsl: Adjust timing_cfg_0 to better support two DDR slots
Increase write-to-write and read-to-read turnaround time for two-slot DDR
configurations. Previously only quad-rank and two dual-rank configurations
have this additional turnaround time. A recent test on two single-rank
DIMMs shows the shorter additional turnaround time is also needed.

Signed-off-by: York Sun <yorksun@freescale.com>
2014-12-05 08:06:11 -08:00
Masahiro Yamada
b41411954d linux/kernel.h: sync min, max, min3, max3 macros with Linux
U-Boot has never cared about the type when we get max/min of two
values, but Linux Kernel does.  This commit gets min, max, min3, max3
macros synced with the kernel introducing type checks.

Many of references of those macros must be fixed to suppress warnings.
We have two options:
 - Use min, max, min3, max3 only when the arguments have the same type
   (or add casts to the arguments)
 - Use min_t/max_t instead with the appropriate type for the first
   argument

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Pavel Machek <pavel@denx.de>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
[trini: Fixup arch/blackfin/lib/string.c]
Signed-off-by: Tom Rini <trini@ti.com>
2014-11-23 06:48:30 -05:00
York Sun
f80d6472b4 driver/ddr/fsl: Fix DDR4 driver
When accumulated ECC is enabled, the DQ_MAP for ECC[4:7] needs to be set
to 0, i.e. 0->0, 1->1, etc., required by controller logic, even these pins
are not actually connected.

Also fix a bug when reading from DDR register to use proper accessor for
correct endianess.

Signed-off-by: York Sun <yorksun@freescale.com>
2014-09-25 08:36:20 -07:00
York Sun
bb5783224b driver/ddr/fsl: Fix tXP and tCKE
The driver was written using old DDR3 spec which only covers low speeds.
The value would be suboptimal for higher speeds. Fix both timing according
to latest DDR3 spec, remove tCKE as an config option.

Signed-off-by: York Sun <yorksun@freescale.com>
2014-09-25 08:36:18 -07:00
York Sun
1d71efbb03 driver/ddr: Restruct driver to allow standalone memory space
U-boot has been initializing DDR for the main memory. The presumption
is the memory stays as a big continuous block, either linear or
interleaved. This change is to support putting some DDR controllers
to separated space without counting into main memory. The standalone
memory controller could use different number of DIMM slots.

Signed-off-by: York Sun <yorksun@freescale.com>
2014-09-25 08:36:18 -07:00
York Sun
ef87cab664 driver/ddr/fsl: Add support of overriding chip select write leveling
JEDEC spec allows DRAM vendors to use prime DQ for write leveling. This
is not an issue unless some DQ pins are not connected. If a platform uses
regular DIMMs but with reduced DDR ECC pins, the prime DQ may end up on
those floating pins for the second rank. The workaround is to use a known
good chip select for this purpose.

Signed-off-by: York Sun <yorksun@freescale.com>
2014-09-08 10:30:34 -07:00
York Sun
5cb27c5d44 driver/ddr/freescale: Fix DDR3 driver for ARM
Reading DDR register should use ddr_in32() for proper endianess.
This patch fixes incorrect waiting time for ARM platforms.

Signed-off-by: York Sun <yorksun@freescale.com>
2014-09-08 10:30:34 -07:00
York Sun
d28cb67142 driver/ddr/freescale: Add support of accumulate ECC
If less than 8 ECC pins are used for DDR data bus width smaller than 64
bits, the 8-bit ECC code will be transmitted/received across several beats,
and it will be used to check 64-bits of data once 8-bits of ECC are
accumulated.

Signed-off-by: York Sun <yorksun@freescale.com>
2014-09-08 10:30:34 -07:00
York Sun
3d75ec95f5 driver/ddr: Fix DDR register timing_cfg_8
The field wrtord_bg should add 2 clocks if on the fly chop is enabled,
according to DDR controller manual for DDR4.

Signed-off-by: York Sun <yorksun@freescale.com>
2014-07-22 16:25:55 -07:00
York Sun
8340e7ac86 driver/ddr: Fix DDR4 driver for ARM
Previously the driver was only tested on Power SoCs. Different barrier
instructions are needed for ARM SoCs.

Signed-off-by: York Sun <yorksun@freescale.com>
2014-07-22 16:25:54 -07:00
York Sun
353527d527 driver/ddr/fsl: Fix printing unspecified module info for DDR4
The offset of module information is at 128, different from DDR3.

Signed-off-by: York Sun <yorksun@freescale.com>
2014-06-05 13:45:07 -07:00
York Sun
9855b3beca powerpc/mpc85xx: Add workaround for DDR erratum A004508
When the DDR controller is initialized below a junction temperature of
0°C and then operated above a junction temperature of 65°C, the DDR
controller may cause receive data errors, resulting ECC errors and/or
corrupted data. This erratum applies to the following SoCs and their
variants: MPC8536, MPC8569, MPC8572, P1010, P1020, P1021, P1022, P1023,
P2020.

Signed-off-by: York Sun <yorksun@freescale.com>
2014-06-05 13:45:07 -07:00
Simon Glass
e1bf824dfd Add cli_ prefix to readline functions
This makes it clear where the code resides.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-05-29 17:45:31 -04:00