Commit Graph

85 Commits

Author SHA1 Message Date
Sebastian Reichel
717bf50f4b board: ge: bx50v3: cleanup phy config
The current PHY rework does the following things:

1. Configure 125MHz clock
2. Setup the TX clock delay (RX is enabled by default),
3. Setup reserved bits to avoid voltage peak

The clock delays are nowadays already configured by the
PHY driver (in ar803x_delay_config). The code for that
can simply be dropped. The clock speed can also be
configured by the PHY driver by adding the device tree
property "qca,clk-out-frequency".

What is left is setting up the undocumented reserved bits
to avoid the voltage peak problem. I slightly improved its
documentation while updating the board's PHY rework code.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-12-26 14:56:09 +01:00
Sebastian Reichel
c44d374bef board: ge: bx50v3: remove confidx magic numbers
Instead of hardcoding index magic numbers in the board code,
also rely on board_fit_config_name_match choosing the right
config for the fitImage containing the kernel.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-12-26 14:56:09 +01:00
Ian Ray
4f1970f437 board: ge: bx50v3: check b850v3 power management watchdog
Set `bootcause' from b850v3 power management watchdog status.

Boot cause "REVERT" is no longer used, remove it.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-12-06 15:31:37 +01:00
Sebastian Reichel
2d86fb31bd board: ge: bx50v3: reduce magic numbers
Use VPD product ID instead of confidx, so that we can easily reuse the
product ID defines and avoid some magic numbers.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-12-06 15:31:36 +01:00
Sebastian Reichel
822e1b31bd board: ge: bx50v3: drop unused pinmux defines
Remove pinmux defines, that are no longer used after
converting the code to devicetree.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-12-06 15:31:36 +01:00
Sebastian Reichel
c4c2d2465e board: ge: common: vpd: fix name
Commit f692b479f0 changed the VPD partition name from "vpd" to
"vpd@0". Fix the VPD reader code to use the new name, so that
the VPD code keeps working.

Fixes: f692b479f0 ("i2c: eeprom: Use reg property instead of offset and size")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-12-06 15:31:36 +01:00
Sebastian Reichel
b431970e7f board: ge: b1x5v2: Add MAINTAINERS
Introduce maintainers file for the GE B1x5 board.

Cc: Huan 'Kitty' Wang <HuanWang@ge.com>
Cc: Ian Ray <ian.ray@ge.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-11-04 19:47:30 +01:00
Sebastian Reichel
3bbc763de6 board: ge: ppd: Update MAINTAINERS
This updates the PPD MAINTAINERS file doing a couple of changes:

 * Replace Martyn with myself, since he no longer has the hardware
   available and add Ian Ray as maintainer
 * Fix the board directory path, which was still listing freescale/
   instead of ge/
 * Order the list of files alphabetically
 * Add board specific device tree files to the file list

Cc: Martyn Welch <martyn.welch@collabora.com>
Cc: Ian Ray <ian.ray@ge.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-11-04 19:47:14 +01:00
Sebastian Reichel
dc438fb6e6 board: ge: bx50v3: Update MAINTAINERS
This updates the Bx50v3 MAINTAINERS file, so that it also catches
changes to the related device tree files. Additionally the list of
files has been sorted alphabetically and I added myself as maintainer.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-11-04 19:47:01 +01:00
Sebastian Reichel
64272efdaf board: ge: b1x5v2: Add GE B1x5v2 and B1x5Pv2
GE B1x5v2 patient monitor series is similar to the CARESCAPE Monitor
series (GE Bx50). It consists of a carrier PCB used in combination
with a Congatec QMX6 SoM. This adds U-Boot support using device model
everywhere and SPL for memory initialization.

Proper configuration is provided as 'ge_b1x5v2_defconfig' and the
combined image u-boot-with-spi.imx can be flashed directly to 1024
byte offset to /dev/mtdblock0. Alternatively SPL and u-boot.imx can
be loaded separately via USB-OTG using e.g. imx_usb.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-11-01 16:01:40 +01:00
Sebastian Reichel
def6f53d21 board: ge: common: vpd: separate I2C specific code
This separates the I2C specific code from the generic
GE vital product data code, so that the generic parts
can be used on hardware with VPD stored in SPI flash
memory.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-11-01 15:58:47 +01:00
Sebastian Reichel
987b8f614c board: ge: common: add config option for RTC and VPD feature
While this code is being used by all GE platforms its useful
to have it behind a config option for hardware bringup of
new platforms.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-11-01 15:58:47 +01:00
Sebastian Reichel
36e3e7deb2 board: ge: common: rename ge_common.c to ge_rtc.c
The file only contains RTC related code, so let's name
it accordingly.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-11-01 15:58:47 +01:00
Masahiro Yamada
b75d8dc564 treewide: convert bd_t to struct bd_info by coccinelle
The Linux coding style guide (Documentation/process/coding-style.rst)
clearly says:

  It's a **mistake** to use typedef for structures and pointers.

Besides, using typedef for structures is annoying when you try to make
headers self-contained.

Let's say you have the following function declaration in a header:

  void foo(bd_t *bd);

This is not self-contained since bd_t is not defined.

To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h>

  #include <asm/u-boot.h>
  void foo(bd_t *bd);

Then, the include direcective pulls in more bloat needlessly.

If you use 'struct bd_info' instead, it is enough to put a forward
declaration as follows:

  struct bd_info;
  void foo(struct bd_info *bd);

Right, typedef'ing bd_t is a mistake.

I used coccinelle to generate this commit.

The semantic patch that makes this change is as follows:

  <smpl>
  @@
  typedef bd_t;
  @@
  -bd_t
  +struct bd_info
  </smpl>

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-07-17 09:30:13 -04:00
Simon Glass
c05ed00afb common: Drop linux/delay.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Simon Glass
4d72caa5b9 common: Drop image.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Patrick Delaunay
b09e28fc54 doc: update reference to README.imximage
Update reference in many files detected by
scripts/documentation-file-ref-check

README.imximage => imx/mkimage/imximage.txt

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16 23:06:54 -04:00
Tom Rini
9a8942b53d sandbox conversion to SDL2
TPM TEE driver
 Various minor sandbox video enhancements
 New driver model core utility functions
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl48iogACgkQfxc6PpAI
 reaVzAf/an3/yKe6r3CVWlcRV6H/dVg1ApnnLpX7jS0p0b++oCVvOiy7z1WPXj3k
 b1SSgENDeeZ/8EHio+Gf7ZidH/TGEj7L6YEFwd1t60GMkZiWEkNf4Z53tw482YG+
 96hoPD+ySTW+ddIdVHWAFG2I4aEiKHANJAp/ItNdD+rLbrEwNQy+eiK5JTOk80B6
 /X8AJCLZeAC1s7vs+2+WolgjT78QGzA9HHalMiublcqh0ivKKk0QeQiOKKPe8JYJ
 om5YY1TxayQ60Xmo5f39/SBfzEEklxw83sU9o1tBeYzyVUpu7fQdkxiDbWdsij77
 DgwLdeYQJGbN+hdSWE0gjTqyhW+lWA==
 =KRoA
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-6feb20' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm

sandbox conversion to SDL2
TPM TEE driver
Various minor sandbox video enhancements
New driver model core utility functions
2020-02-11 10:58:41 -05:00
Ian Ray
30f0909c7e board: ge: mx53ppd: use DM for uart
Drop PPD_UART_PAD_CTRL since it matches defaults.
Enable DM serial and MXC uart.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-02-09 21:47:20 +01:00
Robert Beckett
a707281a00 board: ge: bx50v3: use DM for uart
Remove legacy uart pad and iomux code
Enable DM serial and mxc uart

Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-02-09 21:47:20 +01:00
Robert Beckett
2d1ea19b55 board: ge: mx53ppd: Use DM for ethernet
Remove legacy iomux setup for fec.
Enable phylib and DM fec.
Use Kconfig for enabling fec.

Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-02-09 21:47:20 +01:00
Robert Beckett
92faf43b9c board: ge: bx50v3: Enable DM PWM for backlight
Add backlight and panel devicetree definitions
Use UCLASS_PANEL to enable backlight via display enable handler
Remove old explicit gpio code for handling backlight
Use cls command to initiate display in HW agnostic manner
Enable DM regulator and pwm

Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-02-09 21:47:20 +01:00
Ian Ray
9167c20692 board: ge: mx53ppd: enable DM_VIDEO
Enable DM_VIDEO for mx53ppd.
Enable DM_REGULATOR_FIXED and DM_PWM for the backlight.
Remove unused MX53PPD_LCD_POWER.
Remove old (incorrect) setup_iomux_lcd.
Enable backlight via display enable handler.
Use cls command to initiate display in HW agnostic manner.
Modify `failbootcmd' to use lcdputs.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-02-09 21:47:20 +01:00
Robert Beckett
1dec7fa797 board: ge: bx50v3, imx53ppd: use DM I2C
Remove old (pre-DM) i2c setup code.
Enable DM i2c.
Convert common code to use DM rtc.
Convert common code to read VPD from eeprom partition.
Convert the generic i2c PMIC init code to use the new da9063 driver.

mx53ppd only:
Correct RTC compatible in device tree.
Enable MXC DM i2c driver.
Define CONFIG_SYS_MALLOC_F_LEN so that DM is available in pre-reloc.
Make GPIO banks available during preloc, since initialisation is done
in board_early_init_f().
Add gpio_request() calls to satisfy the DM_GPIO compatibility API.
Remove unused power configuration.

Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Signed-off-by: Ian Ray <ian.ray@ge.com>
2020-02-09 21:47:20 +01:00
Simon Glass
336d4615f8 dm: core: Create a new header file for 'compat' features
At present dm/device.h includes the linux-compatible features. This
requires including linux/compat.h which in turn includes a lot of headers.
One of these is malloc.h which we thus end up including in every file in
U-Boot. Apart from the inefficiency of this, it is problematic for sandbox
which needs to use the system malloc() in some files.

Move the compatibility features into a separate header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00
Robert Beckett
7915e150d6 board: ge: mx53ppd: use imx wdt
Enable DM imx WDT
Enable SYSRESET_WATCHDOG to maintain WDT based reset ability

Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-07 10:26:56 +01:00
Ian Ray
b186cfa1a3 board: ge: pass rtc_status via device tree
Pass rtc_status via the device tree, instead of on kernel command line.
Additionally, the 2038 mitigation is reported, if applied successfully.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-07 10:26:56 +01:00
Denis Zalevskiy
b565b18a29 board: ge: bx50v3: Enable DM for PCI and ethernet
DM for PCI pulls DM for ethernet that also needs other changes described
below to build u-boot and keep existing functionality - ability to update
MAC addresses of FEC ethernet adapter and I210 adapter connected to the
Marvell switch.

- fec_mxc driver with DM needs PHYLIB;

- configuration items are moved from ge_bx50v3.h to ge_bx50v3_defconfig;

- FEC is marked as eth0 because it is always present, so indices changed:
  I210 are still probed in the same order;

- board_eth_init() was used by legacy ethernet, setup for enet iomux and
  pcie is moved to the board_late_init();

- pci_init() is called from the board_late_init() to initiate PCI bus
  probing, so I210 devices are propagated to the device tree;

Signed-off-by: Denis Zalevskiy <denis.zalevskiy@ge.com>
[Describe PHY reset in device tree]
Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-07 10:26:56 +01:00
Ian Ray
c6b31ca186 board: ge: bx50v3: Fix message output to video console
Use vidconsole for output to the LCD, now that DM_VIDEO is used.  Write
white text on a black background, like before migrating to DM_VIDEO.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-07 10:26:56 +01:00
Ian Ray
08ecab0c47 board: ge: bx50v3: Fix run-time warning
Fix GPIO reservation warning on code paths that do not need LVDS power.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-07 10:26:56 +01:00
Robert Beckett
8c26739859 board: ge: bx50v3: sync devicetrees from Linux
Copy device trees from linux, keeping them as separate files for
each board to ease future sync.

Update board code to use generic bx50v3 dt initially, then select
the specific dt based on board detection.

Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-07 10:26:56 +01:00
Simon Glass
5255932f01 common: Move some board functions out of common.h
A number of board function belong in init.h with the others. Move them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:25:21 -05:00
Simon Glass
e7dcf5645f env: Drop environment.h header file where not needed
This header file is now only used by files that access internal
environment features. Drop it from various places where it is not needed.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11 16:43:41 -04:00
Simon Glass
9fb625ce05 env: Move env_set() to env.h
Move env_set() over to the new header file.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11 16:43:41 -04:00
Yangbo Lu
e37ac717d7 Convert to use fsl_esdhc_imx for i.MX platforms
Converted to use fsl_esdhc_imx for i.MX platforms.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
2019-06-23 14:18:34 +08:00
Ian Ray
e75a7d099e mx53ppd: bring dock out of reset at boot
Configure GPIO BUFFERED_HOST_CONTROLLED_RESET_TO_DOCKING_CONNECTOR_N to
bring the dock out of reset at boot.

Signed-off-by: Ian Ray <ian.ray@ge.com>
2019-04-13 20:30:08 +02:00
Ian Ray
61c4c2bf1e board: ge: store version information in fdt
Add board-specific FDT function to store U-Boot version in device tree.

Signed-off-by: Ian Ray <ian.ray@ge.com>
2019-04-13 20:30:08 +02:00
Ian Ray
31c9afdd92 board: ge: ppd: Enable CONFIG_DM_MMC
Use MMC device model, and remove USDHC pin configuration code since the
pinctrl driver is used.

Signed-off-by: Ian Ray <ian.ray@ge.com>
2019-04-13 20:30:08 +02:00
Ian Ray
8d8d3540eb board: ge: bx50v3: Enable CONFIG_DM_SPI, CONFIG_DM_SPI_FLASH
Use SPI flash device model, and remove SPI pin configuration code since
the pinctrl driver is used.

Signed-off-by: Ian Ray <ian.ray@ge.com>
2019-04-13 20:30:08 +02:00
Ian Ray
06f2e030d0 board: ge: bx50v3: Enable CONFIG_DM_GPIO
Enable CONFIG_DM_GPIO as a pre-requisite for enabling CONFIG_DM_SPI.

Add explicit gpio_requests.

Signed-off-by: Ian Ray <ian.ray@ge.com>
2019-04-13 20:30:08 +02:00
Ian Ray
efc260a9af board: ge: bx50v3: Enable CONFIG_DM_MMC
Use MMC device model, and remove USDHC pin configuration code since the
pinctrl driver is used.

Signed-off-by: Ian Ray <ian.ray@ge.com>
2019-04-13 20:30:08 +02:00
Peng Fan
f026c1d9ef imx: mx53ppd: fix build error
board/ge/mx53ppd/mx53ppd.c: In function 'board_late_init':
board/ge/mx53ppd/mx53ppd.c:359:23: error: passing argument 2 of 'read_vpd' from incompatible pointer type [-Werror=incompatible-pointer-types]
  res = read_vpd(&vpd, vpd_callback);
                       ^~~~~~~~~~~~
In file included from board/ge/mx53ppd/mx53ppd.c:37:0:
board/ge/mx53ppd/../../ge/common/vpd_reader.h:19:5: note: expected 'int (*)(struct vpd_cache *, u8,  u8,  u8,  size_t,  const u8 *) {aka int (*)(struct vpd_cache *, unsigned char,  unsigned char,  unsigned char,  unsigned int,  const unsigned char *)}' but argument is of type 'int (*)(void *, u8,  u8,  u8,  size_t,  const u8 *) {aka int (*)(void *, unsigned char,  unsigned char,  unsigned char,  unsigned int,  const unsigned char *)}'
int read_vpd(struct vpd_cache *cache,
     ^~~~~~~~
cc1: all warnings being treated as errors

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2019-01-01 14:12:18 +01:00
Denis Zalevskiy
4dcbccf794 board: ge: Move VPD reading to the vpd_reader
Merge functionality duplicated in bx50v3 and mx53ppd: the logic
is the same except that process_vpd is called at different phases.
Also read_vpd could end up in error, so there is no VPD data in this
case - it shouldn't be processed.

Signed-off-by: Denis Zalevskiy <denis.zalevskiy@ge.com>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
2019-01-01 14:12:18 +01:00
Denis Zalevskiy
4c55208350 board: ge: Move VPD EEPROM configuration to the defconfig
Use standard configuration logic to define EEPROM constants.
Names are based on VPD_EEPROM_ prefix because EEPROM_ is already
used by i2c_eeprom driver.

Signed-off-by: Denis Zalevskiy <denis.zalevskiy@ge.com>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
2018-12-17 10:46:04 +01:00
Denis Zalevskiy
33a6c8d4e6 board: ge: Remove EEPROM bus param from read_vpd()
The bus is statically defined, so remove redundant parameters
from read_vpd() for PPD and Bx50v3.

Signed-off-by: Denis Zalevskiy <denis.zalevskiy@ge.com>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
2018-12-17 10:46:04 +01:00
Dan Cimpoca
f767a4e82e board: ge: bx50v3: fix initialization of i2c bus0
I2C bus 0 was not initialized correctly. There is an offset between i2c
index and the structure number of pad info. So i2c bus 0 can be in an
inconsistent state.

This problem become visible on B{4,6}50v3 with the CPUC HW watchdog enabled.
Sometimes when the CPUC HW watchdog interrupted the boot process, U-Boot was
not able to read VPD from I2C/EEPROM and the system failed to boot up again,
because a device connected to that bus was stuck in data transfer state (from
previous boot attempt) and there was no method to recover (struct
mxc_i2c_bus::idle_bus_fn was not set) courtesy of incorrect initialization.

Signed-off-by: Dan Cimpoca <dan.I.cimpoca@ge.com>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
2018-10-22 14:32:40 +02:00
Ian Ray
9aa7c157ed board: ge: bx50v3: b{4,6}50v3 modeline
The b{4,6}50v3 kernel framebuffer console requires a modeline otherwise
the LVDS panel shows garbage.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
2018-10-22 14:32:23 +02:00
Ian Ray
d9ea0d77a8 board: ge: bx50v3: correct LDB clock
Use Video PLL to provide 65MHz for all displays.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
2018-10-22 14:32:07 +02:00
Fabien Lahoudere
6ee7bb528e board: ge: bx50v3: Change maintainer
While using ./scripts/get_maintainer.pl I detect that the Maintainer name
and address for bx50v3 boards are not valid.
The new maintainer for GE bx50v3 products must be Ian Ray.

Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
2018-10-22 14:31:37 +02:00
Stefano Babic
b4cb809289 imx: bx50v3: fix Maintainers
This fixes the warnings:

WARNING: no status info for 'ge_bx50v3'
WARNING: no maintainers for 'ge_bx50v3

Signed-off-by: Stefano Babic <sbabic@denx.de>
2018-06-27 13:02:36 +02:00