Commit Graph

67885 Commits

Author SHA1 Message Date
Philippe Schenker
08b6a60ee8 colibri-imx8qxp: rename all occurences to colibri-imx8x
The Toradex product is called colibri-imx8x consisting of SoM with
i.MX8QXP and i.MX8DX SoCs.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17 14:41:26 +02:00
Haibo Chen
f9c3a816c0 mmc: fsl_esdhc_imx: check the clock stable status after config the clock rate.
Currently, after config the clock rate, delay 10ms, this is quite a rough
method. Check the clock stable status in the present status register is
enough.

Tested-by: Ji Luo <ji.luo@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
2020-09-17 14:41:07 +02:00
Marek Vasut
d1a7205532 ARM: mx6: ddr: Add support for iMX6UL/ULL/SL/SDL
This patch adds support for iMX6UL/ULL/SL/SDL MMDC into the DDR calibration
code. The difference between MX6DQ and MX6UL/ULL/SL is that the later SoCs
have 2 SDQS registers, just like MX6SX, while the MX6DQ/MX6SDL has 8.

Fixes: 4f4c128c65 ("ARM: mx6: ddr: Add support for iMX6SX")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Eric Nelson <eric@nelint.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-09-17 14:40:55 +02:00
Denis Pynkin
1189bd513c mx6qsabrelite: increase the environment offset
The size of the binary created with the default U-boot config is much
greater than the default offset for environment `0x60000`.
In case if that binary is used for booting via MMC it is overlapped with
the environment stored on MMC.
This leads to U-Boot corruption while saving environment with `saveenv`
command and non-bootable SabreLite board.

The offset for environment `CONFIG_ENV_OFFSET=0x60000` was added in
commit a09fea1 but did not count in the change to `0xC0000` if option
`CONFIG_ENV_IS_IN_MMC` is used.

The offset is also used for variant with environment saving onto SPI NOR
flash (with enabled option `CONFIG_ENV_IS_IN_SPI_FLASH`). In that case the
U-Boot binary flashed on SPI NOR is also corrupted after environment
saving with the original 0x60000 offset.

Signed-off-by: Denis Pynkin <denis.pynkin@collabora.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-09-17 14:40:40 +02:00
Peng Fan
0098222dac imx8mp: Remove parts MIMX8ML7 and MIMX8ML5 support
Latest datasheet revE has removed MIMX8ML7D/5D/7C/5C parts, so
update u-boot to remove decoding and support for those parts.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-09-17 14:40:22 +02:00
Peng Fan
a3e7d51fd5 imx8m: clock_imx8mm: add missed return
Add missed return

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-09-17 14:40:17 +02:00
Peng Fan
ece7844d8f imx8mq: fix SSCG_PLL_REFCLK_SEL_x
Fix SSCG_PLL_REFCLK_SEL_x, the offset starts from 0, not 16

Reported-by: Coverity 3448860
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
2020-09-17 14:40:10 +02:00
Peng Fan
d81e8cf6ea imx8mq: fix FRAC_PLL_REFCLK_SEL_MASK
Coverity reported dead code, however it is FRAC_PLL_REFCLK_SEL_MASK
was wrongly set.

Reported-by: Coverity 10045172
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
2020-09-17 14:40:04 +02:00
Peng Fan
95bae9ff92 imx7: ccm: correct target interface num
According to i.MX 7Dual Applications Processor Reference Manual, Rev. 1
The target interface CCM root index ranges [0,124], so the number
should be 125.

Reported-by: Coverity 18045
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
2020-09-17 14:39:55 +02:00
Igor Opaniuk
763a4aef09 apalis_imx6: provide fdtfile in env instead of setting it in runtime
Provide fdtfile value in default env instead of setting
it dynamically in runtime.

Fixes: 85cb2bc686("apalis/colibri imx6: provide proper fdtfile value")
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17 14:39:09 +02:00
Igor Opaniuk
5d54d7eeb1 colibri_imx6: provide fdtfile in env instead of setting it in runtime
Provide fdtfile value in default env instead of setting
it dynamically in runtime.

Fixes: 85cb2bc686("apalis/colibri imx6: provide proper fdtfile value")
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17 14:39:09 +02:00
Igor Opaniuk
327381e8b5 colibri_imx7: use preboot for fdtfile evaluation
Enable and set preboot var with fdtfile evaluation.
preboot will be checked and run immediately before starting the
CONFIG_BOOTDELAY countdown and/or running the auto-boot command resp.
entering interactive mode.

This provides possibility to use different boot cmds in interactive mode
without manual setting fdtfile value, as it it's already evaluated
before entering interactive mode.

Fixes: a62c60610f("colibri_imx7_emmc: add Colibri iMX7D 1GB (eMMC) module support")
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17 14:39:09 +02:00
Igor Opaniuk
3ab2316a99 colibri_vf: use preboot for fdtfile evaluation
Enable and set preboot var with fdtfile evaluation.
preboot will be checked and run immediately before starting the
CONFIG_BOOTDELAY countdown and/or running the auto-boot command resp.
entering interactive mode.

This provides possibility to use different boot cmds in interactive mode
without manual setting fdtfile value, as it it's already evaluated
before entering interactive mode.

Fixes: 304042c1f3("colibri_vf: set fdtfile for distroboot")
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17 14:39:09 +02:00
Igor Opaniuk
2f310b7f48 colibri-imx6ull: use preboot for fdtfile evaluation
Enable and set preboot var with fdtfile evaluation.
preboot will be checked and run immediately before starting the
CONFIG_BOOTDELAY countdown and/or running the auto-boot command resp.
entering interactive mode.

This provides possibility to use different boot cmds in interactive mode
without manual setting fdtfile value, as it it's already evaluated
before entering interactive mode.

Fixes: board: 31b1e17f44("toradex: add Colibri iMX6ULL support")
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17 14:39:09 +02:00
Igor Opaniuk
b4c9cd6875 colibri_imx7: wrap video specific funcs with ifdefs
Wrap video specific functionality with ifdefs.

Fixes: 195011b24d("colibri-imx7: fix splash logo drawing")
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17 14:39:09 +02:00
Igor Opaniuk
e6fd30dd9e toradex: drop legacy show_boot_logo function and use splashscreen
Drop show_boot_logo legacy function, as splashscreen functionality can
be used instead.

Fixes: d324189772("toradex: common: show boot logo")
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17 14:39:09 +02:00
Igor Opaniuk
1310660f5c colibri_imx7: use splashcreen value instead of legacy function
Set proper splashscreen env value instead of calling legacy function
to show embed boot logo.

Fixes: 195011b24d("colibri-imx7: fix splash logo drawing")
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17 14:39:09 +02:00
Igor Opaniuk
f37aab99f2 colibri-imx6ull: use splashcreen value instead of legacy function
Set proper splashscreen env value instead of calling legacy function
to show embed boot logo.

Fixes: 391c712dde("colibri-imx6ull: show boot logo")
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17 14:39:09 +02:00
Tom Rini
b01ba776c9 Pull request for UEFI sub-system for efi-2020-10-rc5
The following bugs are fixed:
 
 * unaligned access in br_i32_decode()
 * missing restore of global data pointer in UEFI selftest
 * missing restore of global data pointer on RISC-V in UEfI subsystem
 * efi_var_mem_notify_exit_boot_services() should not be __efi_runtime
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl9f4MgACgkQxIHbvCwF
 GsSVcQ/9HmXBg+0SEJpbDB5s8SOP0zUQ6K3IRu+FyVhcGuowo5Zh2Y4vUN+8cTFZ
 WLsuu5JJd+HIMRKD6iRYcx2KsbhUZgFhv6l93uKoQF2jettM2T+OPHFriqas1Vd4
 F93bZXda2jnYxrPA3PgB4BqGUoiYk3OiE2esUSYSIdawoF8FXBKP7O3OTUBxYyxu
 B/OCzjQ+k1lwHg+lKky3+MIShMIC9p46UB+vR67ICmHwHxbKTsqjy/4b3eRwdhjY
 uFIC9xkiUJ5VmMiPu6nous3wlgojfCBRBPhFobFG3SwPNMh63Ht82NFH1eGvO8G2
 6xw9Ug5/2DshJi2asAPy/adYX665bkm/58PeKauSimF/ePSxQY33AsUc0olS5dTt
 mxNdkeU8zrl49XQYfNE/m29p0jdAoXgEo49uDnZO2vLobMYXVWzoEy8y9VaUQObn
 ayxk+z295nNIzYJw65Nxhrkr2i8h3CZQMBNAI+UWNVCiU0fBqIF9L8ka0L7xB2Zz
 8OtErGRjX1KR5VQWmhWHf5vQWhI+B3seAkx6KGGWABujoffTPZtRK7viUzE328Hc
 HZ2YiFARcVr//z5dBIbeHukXyLwT2nPKfrvUJnP91b40LCaeloCRlwJ21JzOIz8P
 kkUd0oT45a/ApZXpV/ZOnhSg9Wh2g2TgmwFwazwCL9xA2c1L+QA=
 =BNos
 -----END PGP SIGNATURE-----

Merge tag 'efi-2020-10-rc5' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for efi-2020-10-rc5

The following bugs are fixed:

* unaligned access in br_i32_decode()
* missing restore of global data pointer in UEFI selftest
* missing restore of global data pointer on RISC-V in UEfI subsystem
* efi_var_mem_notify_exit_boot_services() should not be __efi_runtime
2020-09-16 08:08:06 -04:00
Tom Rini
0487bb5ecd Merge tag 'u-boot-rockchip-20200916' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- Fix rv1108 grf access issue
- make_fit_atf: ignore empty PT_LOAD segment
2020-09-16 08:07:49 -04:00
Heinrich Schuchardt
5b861eea79 rockchip: make_fit_atf: ignore empty PT_LOAD segment
The linker sometimes creates PT_LOAD segments with length (p_filesz) zero
as described in https://man7.org/linux/man-pages/man5/elf.5.html. This
leads to build failures. We should ignore empty segments.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Tested-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-09-16 16:41:30 +08:00
Kever Yang
454b792afe rockchip: rv1108: enable board early init
Enable board early init callback to init board specific hardware.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-09-16 16:32:01 +08:00
Kever Yang
fe4931c09a rockchip: rv1108: Enable grf as pre-reloc node
The grf node will be used before relocate, enable it in dts.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-09-16 16:31:18 +08:00
Kever Yang
f11f138ebf rockchip: rv1108: use correct API for board callback
Use board_early_init_f() instead of mach_cpu_init() for board, the
board_early_init_f() is used for board init and after dm_initf, while
the mach_cpu_init() is used for CPU/SOC and before dm_initf()(not able
to use syscon API).

Fixes: 9cec336708 ("rockchip: evb-rv1108: Use syscon API to get grf base")
Fixes: 4aa33690fc {"rockchip: elgin-rv1108: Use syscon API to get grf base")

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-09-16 16:31:17 +08:00
Tom Rini
4dcced1169 Merge tag 'mmc-2020-9-15' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmc
- Use mmc_of_parse for msm_sdhci
- Add missing common host caps for xenon_sdhci.
2020-09-15 08:59:32 -04:00
Marek Vasut
0e12575645 Azure/GitLab/Travis: Add SH4 r2dplus machine with various PCI ethernet options
Add SH4 R2Dplus machine configured to test various U-Boot PCI ethernet
options -- RTL8139, EEPRO100, AMD PCnet, DEC Tulip.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-15 08:59:06 -04:00
Andre Heider
e79c59c0e2 mmc: xenon_sdhci: Add missing common host capabilities
Use mmc_of_parse() to set the common host properties. That includes
"bus-width", so parsing it can be removed from the driver.

But more importantly, "non-removable" is now respected, which fixes
the usage of eMMC.

Signed-off-by: Andre Heider <a.heider@gmail.com>
Reviewed-by: Konstantin Porotchkin <kostap@marvell.com>
Tested-by: Marek Behún <marek.behun@nic.cz>
2020-09-15 10:15:56 +08:00
Manivannan Sadhasivam
8505147403 mmc: msm_sdhci: Use mmc_of_parse for setting host_caps
Since the introduction of 'get_cd' callback in sdhci core,
dragonboard410c's MMC interface is broken. It turns out that 'get_cd'
callback checks for the host_caps for validating the chip select. And
since the msm_sdhci driver is not parsing the host_caps from DT, not
all of the cababilities are parsed properly. This results in the MMC
interfaces to be broken.

Hence, fix this by adding a call to 'mmc_of_parse' during driver probe.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Aníbal Limón <anibal.limon@linaro.org>
Reviewed-By: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-09-15 10:13:37 +08:00
Heinrich Schuchardt
5bf12a7859 efi_selftest: restore gd before do_reset()
Before calling do_reset() in the EFI selftest we must restore the global
data pointer.

Fixes: fa63753f86 ("efi_selftest: substitute ResetSystem() by do_reset()")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-14 23:28:52 +02:00
Heinrich Schuchardt
d68d7f47a9 efi_loader: save global data pointer on RISC-V
On RISC-V the global data pointer is stored in register gp. When a UEFI
binary calls the EFI API we have to restore it.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-14 23:28:52 +02:00
Heinrich Schuchardt
6b9966e1aa riscv: define function set_gd()
Function set_gd() is needed in the UEFI sub-system if the global data
pointer is stored in a register.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-14 23:28:52 +02:00
Heinrich Schuchardt
e5a31376ac efi_loader: efi_var_mem_notify_exit_boot_services
efi_var_mem_notify_exit_boot_services() is invoked when ExitBootServices()
is called by the UEFI payload.

efi_var_mem_notify_exit_boot_services() should not be defined as
__efi_runtime as it is invoking EFI_ENTRY() and EFI_EXIT() which themselves
are not __efi_runtime.

Fixes: f1f990a8c9 ("efi_loader: memory buffer for variables")
Fixes: e01aed47d6 ("efi_loader: Enable run-time variable support for tee based variables")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2020-09-14 23:28:52 +02:00
Robert Reither
8479333ce7 rsa: crash in br_i32_decode() called from rsa_gen_key_prop()
Fixes problem for unaligned 32bit big-endian access in
lib/rsa/rsa-keyprop.c.

Exchanges br_i32_decode() with get_unaligned_be32().

This will keep the unaligned access for architectures capable and will do
some byte-shift magic for the not so capable ones.

Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-by: Robert Reither <robert.reither@external.thalesgroup.com>
Remove unused include.
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-14 23:28:52 +02:00
Tom Rini
00e5fda006 Merge branch '2020-09-12-assorted-bugfixes'
- A large assortment of minor fixes
- Documentation improvements
2020-09-14 15:39:46 -04:00
Heinrich Schuchardt
185440ffc4 test: do no assume hush parser in validate_empty()
The environment variable test uses function validate_empty() to check that
a variable is not defined. If the hush parser is not enabled, we cannot
refer to a variable by $var_name but only by ${var_name}.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Stephen Warren <swarren@nvidia.com>
2020-09-12 10:53:01 -04:00
Heinrich Schuchardt
9a97314b5b Makefile: mrproper shall delete doc/output/
HTML documentation is generated in doc/output/. This directory shall be
deleted by 'make mrproper'

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-12 10:53:01 -04:00
Heinrich Schuchardt
70e38eea3a doc: describe building with GCC
Provide a description of the U-Boot build process with GCC in the HTML
documentation.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-12 10:53:01 -04:00
Heinrich Schuchardt
2974ba4f65 doc: describe source repository
Add a chapter to the HTML documentation describing how to retrieve the
U-Boot sources.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-12 10:53:01 -04:00
Mingming Lee
75fb7b9163 ARM: MediaTek: amend IC description for MediaTek MT8512
The description for MT8512  has some mistake, so correct it.

Signed-off-by: Mingming Lee <Mingming.Lee@mediatek.com>
2020-09-12 10:53:01 -04:00
Reuben Dowle
eb39d8ba5f Fix data abort caused by mis-aligning FIT data
Attempting to place device tree immediately after an image in memory can lead
to mis-aligned data accesses if that image size is not divisible by the
alignment requirements of the architecture.

Data aborts caused by this were observed on a custom Marvel A388 based system,
where the image was a uboot FIT file. The total size varies depending on the
uboot device tree size, which does not always lead to correct alignment.

The minimum alignment specified for ARM [1] and ARM64 [2] linux booting has been
used

[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/arm/booting.rst#n126
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/arm64/booting.rst#n45

Signed-off-by: Reuben Dowle <reuben.dowle@4rf.com>
2020-09-11 17:13:56 -04:00
T Karthik Reddy
1e2c5bb9e7 mtd: nand: Fix nand write error with bad block addresses above 32-bit
Nand writes should skip the bad blocks with "nand write" command.
In case of bad blocks with above 32-bit address, nand_block_isbad()
returns false due to truncated bad block address.

In below code segment,

	if (nand_block_isbad(mtd, offset & ~(mtd->erasesize - 1)))

offset is 64-bit and mtd->erasesize is 32-bit, hence the truncation is
happening. Cast 'mtd->erasesize' with loff_t to fix this issue.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-09-11 17:13:56 -04:00
Pedro Aguilar
142775a52b env: Crash in 'env import' when using checksum and a specific size
This patch adds a sanity check that avoids 'size' to overflow and crash when
importing an environment that contains a checksum. Example with the wrong size
that causes the crash:

=> env import -c 0x4100000 3 v1

This assumes that v1 has already been successfully exported with
'env export -c -s 0x100 0x4100000 v1'

Signed-off-by: Pedro Aguilar <pedro.aguilar@vimar.com>
2020-09-11 17:13:56 -04:00
Heinrich Schuchardt
21d3946840 bootm: update image OS image size when decompressing
In bootm_load_os() the OS image is decompressed. In later stages of the
boot process we need the decompressed size of the image.

Update images->os.image_len after decompression.

Passing the correct size is necessary if we want to check loaded EFI
binararies for file truncation by comparing the loaded size to the header
field SizeOfImage.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-11 17:13:56 -04:00
Michal Simek
91b735d11f common: Kconfig: Add dependency for default variables strings
Kconfig provides several config options for setting up default variables
but these are unused when variables are passed to U-Boot via file.
That's why cover this dependency in Kconfig.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-09-11 17:13:55 -04:00
Chuanjia Liu
9250d0bad5 PCI: mediatek: Release the resource when PCIe enable port fail
On the mt7623 platform, if one port enable fail and other port
enable succeed. It will hang on when using pci enum
because the resource was not released correctly.

Signed-off-by: Chuanjia Liu <Chuanjia.Liu@mediatek.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
2020-09-10 15:32:09 -04:00
Tom Rini
3dd52dd69e - enables HDMI output & USB keyboard for Odroid-N2
- setups HDMI output background & enables USB keyboard
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAl9Z6a0ACgkQd9zb2sjI
 SdGoog//UfuvCnlrZIhKIcRCxKvulZW8ljGGBfskrOCU3R8uTx5ksRQZzF9jPkrE
 BRXLMSZ3X+jHrLXCNehxyxlROsp5bxPdZ4uVydwNU6q3lPWxzoD15tg4F923xBF5
 3dV2NukA7mNM0IKHBijDabnUGmOUxVJtR1S5ykEzwSLE2lIUivvn2CjxdHJ91FQM
 /666fKdY3RHn+IzqRqcl2+JuR2IccN13IIhfistJF5o9PsW2n2fUq8NQW8CdvTur
 Ap5HsRcJLsqOdM/tkUanIA21OBODL7rxduYejpCFyJyWQYFBi2X6Eqj5NuLJKT/2
 oymEuvw/BnS62SK1AuAtGJmF0K/QRy+ayb3WIligi7+aq8jNdlWdm9AQhT4HsOk+
 DU7kz/+9XmSkVhPBt5YztizXLGloflQRPzgOmCH1FAGmfVG/z/71YmodVXocy9RE
 NYFQ2Jczb8jhdsectCPBi40+6oQln2hfQG1OQwNZPXvC675HYdvBGSKVX5oF4WSa
 5E5LvTj77Bp0YmGesUlcSnwMIjR20NaAsCQjBvTTON5/KbETCAcIZePLLtIWFANj
 b1xCbYGPpDkzdSh7SmPQDfdv0sfaHLANYaKEGmVTQp/2p6halkR2uwSVhx46zy5Z
 JE/ts6Tw62RESMoUo9oXWXfBL0ZWuv5sRMDEbpRcjbyhIvSkl2Q=
 =0ijp
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20200910' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic

- enables HDMI output & USB keyboard for Odroid-N2
- setups HDMI output background & enables USB keyboard
2020-09-10 09:04:02 -04:00
Anand Moon
92f10e6135 configs: odroid-c4: update for HDMI output background & USB keyboard
Enable options SYS_WHITE_ON_BLACK to permit HDMI background
screen from white to back, also enable USB_KEYBOARD.

Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-09-10 10:51:36 +02:00
Anand Moon
3b3c048697 configs: odroid-n2: update for HDMI output & USB keyboard
Enable options to permit HDMI output on Odroid-N2 G12B boards.
Enable VPU Power Domain.
Enable USB_KEYBOARD.

Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-09-10 10:51:36 +02:00
Tom Rini
a34746b86e - fixes on AV96 board: pull up on UART4 RX and adjust PLL4
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE56Yx6b9SnloYCWtD4rK92eCqk3UFAl9Y2ScACgkQ4rK92eCq
 k3WD1wf9FdSNzXaGSezIc1PNF9KnoSDsPD+K1ipw3hJbn5M+PkuTAoy3UcLmWedI
 mBSoU+l9qDJhK2ady2zXI2qrOglvIX6OcHnoEGtUqikCV+Il7A8CWtDkd0m2ajyI
 EixCAGw8GikrrYZITPMV1wfJJSROT4jHgfK5M92mETtSGff0X+3OjsaJiTzGk5jl
 CBPVtLIF4meqggMlOeB4FOQ4fywSZZPv0pvnwjiwIqm00tHG85qiWo9H+W18NuD6
 dXPii2xzUIeBkynKurC/dD8zmLQUX5nyydKnY16Hkpl0NQxwtWSHFOUouOEaXLK+
 xo+9cxHRv/aK+34CcIU2okv4R0Pu5w==
 =O+jw
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20200909' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm

- fixes on AV96 board: pull up on UART4 RX and adjust PLL4
2020-09-09 12:59:02 -04:00
Marek Vasut
b6055945d6 ARM: dts: stm32: Adjust PLL4 settings on AV96 again
PLL4Q is supplying both FDCAN and LTDC. In case HDMI is in use, the
50 MHz generated from PLL4Q cannot be divided well enough to produce
accurate clock for HDMI pixel clock. Adjust it to generate 74.25 MHz
instead. The PLL4P/PLL4R are generating 99 MHz instead of 100 MHz,
which is in tolerance for the SDMMC.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Gerald Baeza <gerald.baeza@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-09-09 15:02:23 +02:00