..
boot0.h
sunxi: A64: do an RMR switch if started in AArch32 mode
2017-01-04 16:37:42 +01:00
clock_sun4i.h
sunxi: Add missing macros to configure the NAND controller clk
2016-07-24 20:36:28 -05:00
clock_sun6i.h
sunxi: Add clock support for TV encoder
2017-05-15 21:22:57 +02:00
clock_sun8i_a83t.h
mmc: sunxi: Support new mode
2017-08-28 22:36:44 +05:30
clock_sun9i.h
sunxi: add initial clock setup for sun9i for SPL
2016-10-30 11:38:04 +01:00
clock.h
sunxi: Add support for Allwinner A64 SoCs
2016-04-01 09:52:28 +02:00
cpu_sun4i.h
sunxi: Add base address for TV encoder
2017-06-09 15:30:28 +02:00
cpu_sun9i.h
sunxi: Add support for SID e-fuses on sun9i
2016-10-30 11:38:04 +01:00
cpu.h
sunxi: Use H3/A64 DRAM initialization code for R40
2017-04-20 13:30:01 +02:00
cpucfg.h
sunxi: Add CPUCFG debug lock and sun7i cpu power controls
2016-06-20 22:44:00 +02:00
display2.h
sunxi: video: Add support for CSC and TVE to DE2 driver
2017-06-09 15:30:47 +02:00
display.h
sunxi: video: Split out TVE code
2017-05-15 21:22:24 +02:00
dma_sun4i.h
sunxi: Add DMA definitions
2015-05-29 13:46:36 +02:00
dma.h
sunxi: Add DMA definitions
2015-05-29 13:46:36 +02:00
dram_sun4i.h
sunxi: Make DRAM_ODT_EN Kconfig setting a bool
2015-05-19 18:46:44 +02:00
dram_sun6i.h
sun6i: Add dram initialization code
2014-11-13 14:49:01 +01:00
dram_sun8i_a23.h
sunxi: Make DRAM_ODT_EN Kconfig setting a bool
2015-05-19 18:46:44 +02:00
dram_sun8i_a33.h
sunxi: Add a33 dram init code
2015-05-04 16:51:51 +02:00
dram_sun8i_a83t.h
sunxi: Add support for LPDDR3 for A83T
2016-01-26 16:20:05 +01:00
dram_sun9i.h
sunxi: DRAM initialisation for sun9i
2016-10-30 11:38:04 +01:00
dram_sunxi_dw.h
sunxi: Add selective DRAM type and timing
2017-06-08 22:37:55 +05:30
dram.h
sunxi: makes an invisible option for H3-like DRAM controllers
2017-06-08 22:37:55 +05:30
gpio.h
sunxi: add basic V3s support
2017-04-21 09:23:17 +02:00
gtbus_sun9i.h
sunxi: add gtbus-initialisation for sun9i
2016-10-30 11:38:04 +01:00
gtbus.h
sunxi: add gtbus-initialisation for sun9i
2016-10-30 11:38:04 +01:00
i2c.h
sunxi: Add support for the I2C controller which is part of the PRCM
2016-01-21 07:30:01 +01:00
lcdc.h
sunxi: video: Convert lcdc to use struct display_timing
2017-04-20 13:34:52 +02:00
mmc.h
mmc: sunxi: Support new mode
2017-08-28 22:36:44 +05:30
p2wi.h
sun6i: Add new p2wi controller driver
2014-11-13 14:49:01 +01:00
pmic_bus.h
sunxi: axp: Move axp pmic register helpers to a separate file
2015-05-04 16:51:53 +02:00
prcm.h
sunxi: add PRCM secure switch register definition
2017-08-11 15:49:39 +05:30
pwm.h
sunxi: display: Use PWM to drive backlight where applicable
2016-08-26 16:58:37 +02:00
rsb.h
sunxi: rsb: Move rsb_set_device_mode() call to rsb_init()
2015-02-02 13:55:14 +01:00
spl.h
sunxi: Store the device tree name in the SPL header
2017-05-17 23:23:58 +05:30
sys_proto.h
sunxi: Fix CONFIG_SUNXI_GMAC references
2017-09-01 20:48:27 +05:30
timer.h
sunxi: Fix watchdog reset function for R40
2017-04-20 13:30:00 +02:00
tve.h
sunxi: video: Split out TVE code
2017-05-15 21:22:24 +02:00
tzpc.h
sunxi: Support Secure Memory Touch Arbiter (SMTA) in sun8i H3
2016-01-26 16:20:04 +01:00
usb_phy.h
sunxi: musb: Power off OTG port VBUS when disabled
2016-09-17 14:37:40 +02:00
watchdog.h
sunxi: Fix watchdog reset function for R40
2017-04-20 13:30:00 +02:00