Jernej Skrabec b98efa1db3 sunxi: video: Add support for CSC and TVE to DE2 driver ... Extend DE2 driver with support for TVE driver, which will be added in next commit. TVE unit expects data to be in YUV format, so CSC support is also added here. Note that HDMI driver has higher priority, so TV out is not probed if HDMI monitor is detected. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Simon Glass <sjg@chromium.org>		2017-06-09 15:30:47 +02:00
..
boot0.h	sunxi: A64: do an RMR switch if started in AArch32 mode	2017-01-04 16:37:42 +01:00
clock_sun4i.h	sunxi: Add missing macros to configure the NAND controller clk	2016-07-24 20:36:28 -05:00
clock_sun6i.h	sunxi: Add clock support for TV encoder	2017-05-15 21:22:57 +02:00
clock_sun8i_a83t.h	sunxi: clk: Fix USB PHY clock macros for A83T	2016-03-31 17:04:08 +02:00
clock_sun9i.h	sunxi: add initial clock setup for sun9i for SPL	2016-10-30 11:38:04 +01:00
clock.h	sunxi: Add support for Allwinner A64 SoCs	2016-04-01 09:52:28 +02:00
cpu_sun4i.h	sunxi: Add base address for TV encoder	2017-06-09 15:30:28 +02:00
cpu_sun9i.h	sunxi: Add support for SID e-fuses on sun9i	2016-10-30 11:38:04 +01:00
cpu.h	sunxi: Use H3/A64 DRAM initialization code for R40	2017-04-20 13:30:01 +02:00
cpucfg.h	sunxi: Add CPUCFG debug lock and sun7i cpu power controls	2016-06-20 22:44:00 +02:00
display2.h	sunxi: video: Add support for CSC and TVE to DE2 driver	2017-06-09 15:30:47 +02:00
display.h	sunxi: video: Split out TVE code	2017-05-15 21:22:24 +02:00
dma_sun4i.h	sunxi: Add DMA definitions	2015-05-29 13:46:36 +02:00
dma.h	sunxi: Add DMA definitions	2015-05-29 13:46:36 +02:00
dram_sun4i.h	sunxi: Make DRAM_ODT_EN Kconfig setting a bool	2015-05-19 18:46:44 +02:00
dram_sun6i.h	sun6i: Add dram initialization code	2014-11-13 14:49:01 +01:00
dram_sun8i_a23.h	sunxi: Make DRAM_ODT_EN Kconfig setting a bool	2015-05-19 18:46:44 +02:00
dram_sun8i_a33.h	sunxi: Add a33 dram init code	2015-05-04 16:51:51 +02:00
dram_sun8i_a83t.h	sunxi: Add support for LPDDR3 for A83T	2016-01-26 16:20:05 +01:00
dram_sun8i_h3.h	sunxi: Use H3/A64 DRAM initialization code for R40	2017-04-20 13:30:01 +02:00
dram_sun9i.h	sunxi: DRAM initialisation for sun9i	2016-10-30 11:38:04 +01:00
dram.h	sunxi: Use H3/A64 DRAM initialization code for R40	2017-04-20 13:30:01 +02:00
gpio.h	sunxi: add basic V3s support	2017-04-21 09:23:17 +02:00
gtbus_sun9i.h	sunxi: add gtbus-initialisation for sun9i	2016-10-30 11:38:04 +01:00
gtbus.h	sunxi: add gtbus-initialisation for sun9i	2016-10-30 11:38:04 +01:00
i2c.h	sunxi: Add support for the I2C controller which is part of the PRCM	2016-01-21 07:30:01 +01:00
lcdc.h	sunxi: video: Convert lcdc to use struct display_timing	2017-04-20 13:34:52 +02:00
mmc.h	sunxi: Use BROM stored boot_media value to determine our boot-source	2016-07-15 15:54:56 +02:00
p2wi.h	sun6i: Add new p2wi controller driver	2014-11-13 14:49:01 +01:00
pmic_bus.h	sunxi: axp: Move axp pmic register helpers to a separate file	2015-05-04 16:51:53 +02:00
prcm.h	sunxi: Group cpu core related controls together	2016-06-20 22:44:00 +02:00
pwm.h	sunxi: display: Use PWM to drive backlight where applicable	2016-08-26 16:58:37 +02:00
rsb.h	sunxi: rsb: Move rsb_set_device_mode() call to rsb_init()	2015-02-02 13:55:14 +01:00
spl.h	sunxi: Store the device tree name in the SPL header	2017-05-17 23:23:58 +05:30
sys_proto.h	sunxi: Fix gmac not working due to cpu_eth_init no longer being called	2016-03-23 22:04:13 +01:00
timer.h	sunxi: Fix watchdog reset function for R40	2017-04-20 13:30:00 +02:00
tve.h	sunxi: video: Split out TVE code	2017-05-15 21:22:24 +02:00
tzpc.h	sunxi: Support Secure Memory Touch Arbiter (SMTA) in sun8i H3	2016-01-26 16:20:04 +01:00
usb_phy.h	sunxi: musb: Power off OTG port VBUS when disabled	2016-09-17 14:37:40 +02:00
watchdog.h	sunxi: Fix watchdog reset function for R40	2017-04-20 13:30:00 +02:00