Dave Prue 6ff005cf19 sunxi: Fix CONFIG_SUNXI_GMAC references ... SUNXI_GMAC was still used to configure the code where as the same has been renamed and moved to Kconfig in below commit "sunxi: Move SUNXI_GMAC to Kconfig" (sha1: 4d43d065db) Signed-off-by: Dave Prue <dave@prue.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Mark Kettenis <kettenis@openbsd.org> Tested-by: Mark Kettenis <kettenis@openbsd.org> [Tweek commit message, config_whitelist.txt, build-whitelist.sh] Signed-off-by: Jagan Teki <jagan@openedev.com>		2017-09-01 20:48:27 +05:30
..
boot0.h	sunxi: A64: do an RMR switch if started in AArch32 mode	2017-01-04 16:37:42 +01:00
clock_sun4i.h	sunxi: Add missing macros to configure the NAND controller clk	2016-07-24 20:36:28 -05:00
clock_sun6i.h	sunxi: Add clock support for TV encoder	2017-05-15 21:22:57 +02:00
clock_sun8i_a83t.h	mmc: sunxi: Support new mode	2017-08-28 22:36:44 +05:30
clock_sun9i.h	sunxi: add initial clock setup for sun9i for SPL	2016-10-30 11:38:04 +01:00
clock.h	sunxi: Add support for Allwinner A64 SoCs	2016-04-01 09:52:28 +02:00
cpu_sun4i.h	sunxi: Add base address for TV encoder	2017-06-09 15:30:28 +02:00
cpu_sun9i.h	sunxi: Add support for SID e-fuses on sun9i	2016-10-30 11:38:04 +01:00
cpu.h	sunxi: Use H3/A64 DRAM initialization code for R40	2017-04-20 13:30:01 +02:00
cpucfg.h	sunxi: Add CPUCFG debug lock and sun7i cpu power controls	2016-06-20 22:44:00 +02:00
display.h	sunxi: video: Split out TVE code	2017-05-15 21:22:24 +02:00
display2.h	sunxi: video: Add support for CSC and TVE to DE2 driver	2017-06-09 15:30:47 +02:00
dma_sun4i.h	sunxi: Add DMA definitions	2015-05-29 13:46:36 +02:00
dma.h	sunxi: Add DMA definitions	2015-05-29 13:46:36 +02:00
dram_sun4i.h	sunxi: Make DRAM_ODT_EN Kconfig setting a bool	2015-05-19 18:46:44 +02:00
dram_sun6i.h	sun6i: Add dram initialization code	2014-11-13 14:49:01 +01:00
dram_sun8i_a23.h	sunxi: Make DRAM_ODT_EN Kconfig setting a bool	2015-05-19 18:46:44 +02:00
dram_sun8i_a33.h	sunxi: Add a33 dram init code	2015-05-04 16:51:51 +02:00
dram_sun8i_a83t.h	sunxi: Add support for LPDDR3 for A83T	2016-01-26 16:20:05 +01:00
dram_sun9i.h	sunxi: DRAM initialisation for sun9i	2016-10-30 11:38:04 +01:00
dram_sunxi_dw.h	sunxi: Add selective DRAM type and timing	2017-06-08 22:37:55 +05:30
dram.h	sunxi: makes an invisible option for H3-like DRAM controllers	2017-06-08 22:37:55 +05:30
gpio.h	sunxi: add basic V3s support	2017-04-21 09:23:17 +02:00
gtbus_sun9i.h	sunxi: add gtbus-initialisation for sun9i	2016-10-30 11:38:04 +01:00
gtbus.h	sunxi: add gtbus-initialisation for sun9i	2016-10-30 11:38:04 +01:00
i2c.h	sunxi: Add support for the I2C controller which is part of the PRCM	2016-01-21 07:30:01 +01:00
lcdc.h	sunxi: video: Convert lcdc to use struct display_timing	2017-04-20 13:34:52 +02:00
mmc.h	mmc: sunxi: Support new mode	2017-08-28 22:36:44 +05:30
p2wi.h	sun6i: Add new p2wi controller driver	2014-11-13 14:49:01 +01:00
pmic_bus.h	sunxi: axp: Move axp pmic register helpers to a separate file	2015-05-04 16:51:53 +02:00
prcm.h	sunxi: add PRCM secure switch register definition	2017-08-11 15:49:39 +05:30
pwm.h	sunxi: display: Use PWM to drive backlight where applicable	2016-08-26 16:58:37 +02:00
rsb.h	sunxi: rsb: Move rsb_set_device_mode() call to rsb_init()	2015-02-02 13:55:14 +01:00
spl.h	sunxi: Store the device tree name in the SPL header	2017-05-17 23:23:58 +05:30
sys_proto.h	sunxi: Fix CONFIG_SUNXI_GMAC references	2017-09-01 20:48:27 +05:30
timer.h	sunxi: Fix watchdog reset function for R40	2017-04-20 13:30:00 +02:00
tve.h	sunxi: video: Split out TVE code	2017-05-15 21:22:24 +02:00
tzpc.h	sunxi: Support Secure Memory Touch Arbiter (SMTA) in sun8i H3	2016-01-26 16:20:04 +01:00
usb_phy.h	sunxi: musb: Power off OTG port VBUS when disabled	2016-09-17 14:37:40 +02:00
watchdog.h	sunxi: Fix watchdog reset function for R40	2017-04-20 13:30:00 +02:00