mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-06-09 23:36:03 +09:00
![]() The default setting for USB High Speed Squelch Threshold results in a threshold close to or lower than 100mV. This leads to Receiver Compliance test failure for a 100mV threshold. Shift the threshold from ~100mV towards ~130mV by setting SQRXTUNE to 0x0 to pass USB High Speed Receiver Sensitivity Compliance test. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> [YS: Reordered Kconfig options] Reviewed-by: York Sun <york.sun@nxp.com> |
||
---|---|---|
.. | ||
doc | ||
cpu.c | ||
cpu.h | ||
fdt.c | ||
fsl_lsch2_serdes.c | ||
fsl_lsch2_speed.c | ||
fsl_lsch3_serdes.c | ||
fsl_lsch3_speed.c | ||
Kconfig | ||
lowlevel.S | ||
ls1012a_serdes.c | ||
ls1043a_psci.S | ||
ls1043a_serdes.c | ||
ls1046a_serdes.c | ||
ls1088a_serdes.c | ||
ls2080a_serdes.c | ||
Makefile | ||
mp.c | ||
ppa.c | ||
soc.c | ||
spl.c |