mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 00:48:52 +09:00
![]() Sync the Linux Kernel 5.4-rc6 device tree for Phytec Phycore SoM and Segin board based on imx6UL and imx6ULL. Changes includes Phytec naming convention for the devicetree files. Signed-off-by: Parthiban Nallathambi <parthitce@gmail.com> Acked-by: Peng Fan <peng.fan@nxp.com> |
||
---|---|---|
.. | ||
Kconfig | ||
MAINTAINERS | ||
Makefile | ||
pcl063.c | ||
README | ||
spl.c |
How to use U-Boot on PHYTEC phyBOARD-i.MX6UL-Segin -------------------------------------------------- - Configure and build U-Boot for phyCORE-i.MX6UL: $ make mrproper $ make phycore_pcl063_defconfig $ make This will generate SPL and u-boot-dtb.img images. - The SPL and u-boot-dtb.img images need to be flashed into the micro SD card: $ sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync $ sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 bs=1k seek=69; sync - Jumper settings: JP1: Open: Boot from NAND Closed: Boot from SD/MMC1 - Connect the Serial cable to UART0 and the PC for the console. - Insert the micro SD card in the board and power it up. - U-Boot messages should come up.