Commit Graph

308 Commits

Author SHA1 Message Date
Sean Anderson
3e40976aba cmd: log: Add commands to manipulate filters
This adds several commands to add, list, and remove log filters. Due to the
complexity of adding a filter, `log filter-list` uses options instead of
positional arguments.

These commands have been added as subcommands to log by using a dash to
join the subcommand and subsubcommand. This is stylistic, and they could be
converted to proper subsubcommands if it is wished.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-30 10:56:11 -04:00
Tom Rini
eca57cafa5 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- Bug fixes and updates on vid, ls1088a lx2160a and other layerscape
  platforms.
- Add optee_rpmb support for LX2 & Kontron sl28 support
2020-10-29 09:10:24 -04:00
Pratyush Yadav
05115abe8d cmd: Add a mux command
This command lets the user list, select, and deselect mux controllers
introduced with the mux framework on the fly. It has 3 subcommands:
list, select, and deselect.

List: Lists all the mux present on the system. The muxes are listed for
each chip. The chip is identified by its device name. Each chip can have
a number of mux controllers. Each is listed in sequence and is assigned
a sequential ID based on its position in the mux chip. It lists details
like ID, whether the mux is currently selected or not, the current
state, the idle state, and the number of states.

A sample output would look something like:

=> mux list
a-mux-controller:
	ID	Selected	Current State	Idle State	Num States
	0	no        	unknown   	as-is     	0x4
	1	no        	0x2       	0x2       	0x10
	2	no        	0x73      	0x73      	0x100

another-mux-controller:
	ID	Selected	Current State	Idle State	Num States
        0       no              0x1             0x1             0x4
        1       no              0x2             0x2             0x4

Select: Selects a given mux and puts it in the specified state. This
subcommand takes 3 arguments: mux chip, mux ID, state to set
the mux in. The arguments mux chip and mux ID are used to identify which
mux needs to be selected, and then it is selected to the given state.
The mux needs to be deselected before it can be selected again in
another state. The state should be a hexadecimal number.

For example:
=> mux list
a-mux-controller:
        ID      Selected        Current State   Idle State      Num States
        0       no              0x1             0x1             0x4
        1       no              0x1             0x1             0x4
=> mux select a-mux-controller 0 0x3
=> mux list
a-mux-controller:
        ID      Selected        Current State   Idle State      Num States
        0       yes             0x3             0x1             0x4
        1       no              0x1             0x1             0x4

Deselect: Deselects a given mux and puts it in its idle state. This
subcommand takes 2 arguments: the mux chip and mux ID to identify which
mux needs to be deselected. So in the above example, we can deselect mux
0 using:

=> mux deselect a-mux-controller 0
=> mux list
a-mux-controller:
        ID      Selected        Current State   Idle State      Num States
        0       no              0x1             0x1             0x4
        1       no              0x1             0x1             0x4

Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-28 11:49:31 -04:00
Bin Meng
3bc0db11ba cmd: Add a 'misc' command to access miscellaneous devices
Enable the command "misc" for accessing miscellaneous devices with
a MISC uclass driver. The command provides listing all MISC devices
as well as read and write functionalities via their drivers.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
2020-10-23 13:33:07 -04:00
Bin Meng
1606085409 cmd: Rename CMD_MISC to CMD_SLEEP
The "cmd/Kconfig" has a TODO description for CMD_MISC that it should
really be named as CMD_SLEEP. Change it in the whole source tree.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
2020-10-23 13:33:07 -04:00
Ruchika Gupta
bcc6c57452 cmd: optee_rpmb command for read/write of rpmb from optee
Enable "optee_rpmb" command to write/read named persistent values
created on RPMB by opening session with OPTEE AVB TA.
This provides easy test for establishing a session with OPTEE
TA and storage of persistent data in MMC RPMB.

It includes following subcommands:

optee_rpmb read_pvalue:read persistent values on rpmb via OPTEE AVB TA
optee_rpmb write_pvalue:write persistent values on rpmb via OPTEE AVB
TA

Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-10-23 16:52:09 +05:30
Frédéric Danis
9744d1a547 cmd: Add command to display or save Linux PStore dumps
This patch adds a new pstore command allowing to display or save ramoops
logs (oops, panic, console, ftrace and user) generated by a previous
kernel crash.
PStore parameters can be set in U-Boot configuration file, or at run-time
using "pstore set" command. Records size should be the same as the ones
used by kernel, and should be a power of 2.
This command allows:
- to display uncompressed logs
- to save compressed or uncompressed logs, compressed logs are saved as a
  compressed stream, it may need some work to be able to decompress it,
  e.g. adding a fake header:
  "printf "\x1f\x8b\x08\x00\x00\x00\x00\x00\x00\x00" |
  cat - dmesg-ramoops-0.enc.z | gzip -dc"
- ECC part is not used to check memory corruption
- only 1st FTrace log is displayed or saved

Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
[trini: Minor updates for current design, correct spacing in rST]
Signed-off-by: Tom Rini <trini@konsulko.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Heiko Schocher <hs@denx.de>
2020-10-14 11:16:19 -04:00
Simon Glass
98eed0d4f9 Kconfig: Move autoboot options under boot options
At present the autoboot options are in cmd/Kconfig but they don't really
relate to commands. They relate to booting, so move this menu under the
boot menu.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-09 11:59:50 -04:00
Simon Glass
4aed227623 bloblist: Add a command
It is helpful to be able to see basic statistics about the bloblist and
also to list its contents. Add a 'bloblist' command to handle this.

Put the display functions in the bloblist modules rather than in the
command code itself. That allows showing a list from SPL, where commands
are not available.

Also make bloblist_first/next_blob() static as they are not used outside
this file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-06 09:07:54 -06:00
Philippe Reynes
912ece4c3d sntp: use udp framework
This commits update the support of sntp to use
the framework udp. This change allows to remove
all the reference to sntp in the main network
file net/net.c.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-30 16:55:03 -04:00
Pragnesh Patel
c5a7e5b3dd cmd: irq: disable CMD_IRQ for riscv arch
For RISC-V arch, no need for CMD_IRQ so disable the same.

Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-09-30 08:54:03 +08:00
Ralph Siemsen
9989fb18bd cmd: mem: fix range of bitflip test
The bitflip test uses two equal sized memory buffers. This is achieved
by splitting the range of memory into two pieces. The address of the
second buffer, as well as the length of each buffer, were not correctly
calculated. This caused bitflip test to access beyond the end of range.
This patch fixes the pointer arithmetic problem.

A second problem arises because u-boot "mtest" command expects the
ending address to be inclusive. When computing (end - start) this
results in missing 1 byte of the requested length. The bitflip test
expects a count rather than an "ending" address. Thus it fails to test
the last word of the requested range. Fixed by using (end - start + 1).

Added Kconfig option to optionally disable the bitflip test, since it
does add significantly to the time taken for "mtest".

Fixes: 8e434cb705 ("cmd: mem: Add bitflip
memory test to alternate mtest")

Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-09-18 16:19:58 -04:00
Michal Simek
6e741cfa93 cmd: Kconfig: Change dependency for CMD_ADC
CMD_ADC selected DM_REGULATOR unconditionally without enabling DM.
That's why change select to depends on to cover it.

Kconfig is showing this issue as:
WARNING: unmet direct dependencies detected for REGMAP
  Depends on [n]: DM [=n]
  Selected by [y]:
  - DM_REGULATOR_PBIAS [=y] && DM_REGULATOR [=y]

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Update CMD_ADC=y configs to enable DM_REGULATOR now]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-27 11:26:39 -04:00
Heinrich Schuchardt
c92b50a44b cmd: provide command sbi
Provide a command to display information about the SBI implementation.

The output might look like:

=> sbi
SBI 0.2
OpenSBI
Extensions:
  sbi_set_timer
  sbi_console_putchar
  sbi_console_getchar
  sbi_clear_ipi
  sbi_send_ipi
  sbi_remote_fence_i
  sbi_remote_sfence_vma
  sbi_remote_sfence_vma_asid
  sbi_shutdown
  SBI Base Functionality
  Timer Extension
  IPI Extension
  RFENCE Extension
  Hart State Management Extension

The command can be used to construct a unit test checking that the
communication with the SEE is working.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Pragnesh Patel <pragnesh.patel@openfive.com>
Tested-by:  Pragnesh Patel <pragnesh.patel@openfive.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Tested-by: Rick Chen <rick@andestech.com>
2020-08-25 09:34:47 +08:00
Anastasiia Lukianenko
722bc5b5d9 xen: pvblock: Add initial support for para-virtualized block driver
Add initial infrastructure for Xen para-virtualized block device.
This includes compile-time configuration and the skeleton for
the future driver implementation.
Add new class UCLASS_PVBLOCK which is going to be a parent for
virtual block devices.
Add new interface type IF_TYPE_PVBLOCK.

Implement basic driver setup by reading XenStore configuration.

Signed-off-by: Andrii Anisov <andrii_anisov@epam.com>
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
2020-08-14 15:18:30 -04:00
Joao Marcos Costa
bba604b65e fs/squashfs: add filesystem commands
Add 'ls' and 'load' commands.

Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
2020-08-07 22:31:32 -04:00
Simon Glass
550a9e7902 cmd: Update the memory-search command
Add various fixes and improvements to this command that were missed in
the original version. Unfortunately I forgot to send v2.

- Fix Kconfig name
- Use a separate variable for the remaining search length
- Correct a minor bug
- Move into a separate test suite
- Add -q flag to the 'quiet' test to test operation when console is enabled
- Enable the feature for sandbox

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-07 22:31:32 -04:00
John Chau
4a4830cf91 cmd: add clone command
This patch adds a feature for block device cloning similar to dd
command, this should be useful for boot-strapping a device where
usb gadget or networking is not available. For instance one can
clone a factory image into a blank emmc from an external sd card.

Signed-off-by: John Chau <john@harmon.hk>
2020-08-04 23:29:59 -04:00
Patrick Delaunay
a97d22ebba cmd: env: add env select command
Add the new command 'env select' to force the persistent storage
of environment, saved in gd->env_load_prio.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31 10:13:00 -04:00
Patrick Delaunay
0115dd3a6a cmd: env: add env load command
Add the new command env load to load the environment from
the current location gd->env_load_prio.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31 10:13:00 -04:00
Philippe Reynes
325141a6ea cmd: button: add a new 'button' command
Adds a command 'button' that provides the list of buttons
supported by the board, and the state of a button.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-07-28 19:30:39 -06:00
Patrick Delaunay
6718ebd032 cmd: env: add option for quiet output on env info
The "env info" can be use for test with -d and -p parameter,
in scripting case the output of the command is not needed.

This patch allows to deactivate this output with a new option "-q".

For example, we can save the environment if default
environment is used and persistent storage is managed with:
  if env info -p -d -q; then env save; fi

Without the quiet option, I have the unnecessary traces
First boot:
      Default environment is used
      Environment can be persisted
      Saving Environment to EXT4... File System is consistent

Next boot:
      Environment was loaded from persistent storage
      Environment can be persisted

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-07-26 14:35:30 -04:00
Heinrich Schuchardt
ec5f0ed33f efi_selftest: enable 'bootefi hello'
In our Python tests we want to run 'bootefi hello'. Enable it by default
when compiling with CMD_BOOTEFI_SELFTEST.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-16 12:37:02 +02:00
Heinrich Schuchardt
a2f0b504f4 cmd: drop fitupd command
The `fitupd' command is not used by any board. The `dfu tftp' command
provides the same capabilities.

So let's drop the `fitupd' command.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-16 12:37:01 +02:00
Rasmus Villemoes
803a859884 rtc: add rtc command
Mostly as an aid for debugging RTC drivers, provide a command that can
be used to read/write arbitrary registers (assuming the driver
provides the read/write methods or their single-register-at-a-time
variants).

Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2020-07-09 06:02:45 +02:00
Simon Glass
bdded2015c cmd: Add a memory-search command
It is useful to be able to find hex values and strings in a memory range.
Add a command to support this.

cmd: Fix 'md' and add a memory-search command
At present 'md.q' is broken. This series provides a fix for this. It also
implements a new memory-search command called 'ms'. It allows searching
memory for hex and string data.
END

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-08 17:21:46 -04:00
Niel Fourie
e369790843 cmd: blkls: Add blkls command
Add a command to print a list of available block device drivers,
and for each, the list of known block devices.

Signed-off-by: Niel Fourie <lusus@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-07-07 15:37:13 -04:00
Heinrich Schuchardt
8e8059ccc5 cmd: fitupd: move config check to Kconfig
Configuration checks should not be in the C files but in the Kconfig files.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-06-02 17:27:04 -04:00
Michael Walle
eff5a54758 cmd: zip: automatically pull in gzip()
Move the CONFIG_GZIP_COMPRESSED from a config.h macro to a Kconfig menu
item. It is not selectable by a user because there is no reason to do
so. Instead it will be automatically selected by the stuff which uses
gzip(), like the zip command.

Remove it from the config_whitelist.txt. Also remove
CONFIG_GZIP_COMPRESS_DEF_SZ as this was never used on any board. The
default seems to be sane, otherwise it should be added as a Kconfig
option.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-25 11:54:53 -04:00
Michael Walle
56c311bd82 cmd: unzip: automatically select CONFIG_GZIP
unzip calls gzwrite() which is provided in lib/gunzip.c. Make sure it is
automatically pulled in if the user selects CMD_UNZIP.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Heinrich Schuchardt <xypron.glkp@gmx.de>
2020-05-25 11:54:53 -04:00
Ashok Reddy Soma
702de89cc6 treewide: mem: Move mtest related defines to Kconfig
Move below defines which are used by mtest utility to Kconfig.
CONFIG_SYS_MEMTEST_START
CONFIG_SYS_MEMTEST_END

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
[trini: Fix kmcoge5ne board, re-run migration as well]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-08 12:02:56 -04:00
Simon Glass
0b885bcfd9 acpi: Add an acpi command
It is useful to dump ACPI tables in U-Boot to see what has been generated.
Add a command to handle this.

To allow the command to find the tables, add a position into the global
data.

Support subcommands to list and dump the tables.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-04-30 17:16:12 +08:00
Tom Rini
2b63959e30 Merge tag 'mmc-2020-4-22' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmc
- iproc_sdhci memory leak fix and enable R1B resp quirk
- more mmc cmds and several mmc updates from Heinirich
- Use bounce buffer for tmio sdhci
- Alignment check for tmio sdhci
2020-04-22 08:58:41 -04:00
Heinrich Schuchardt
453d21381b mmc: adjust Kconfig for mmc sub-commands
All sub-commands of the mmc command should be shown in the Kconfig menu
next to the mmc command. This includes:

* mmc bkops
* mmc rpmb
* mmc swrite

The mmc rpmb sub-command is not usable without CONFIG_SUPPORT_EMMC_RPMB.
Add the missing dependency.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-04-22 20:41:56 +08:00
Tom Rini
94c03c7c77 Merge tag 'for-v2020.07' of https://gitlab.denx.de/u-boot/custodians/u-boot-ubi
new ubi command for renaming an UBI volume
2020-04-21 08:27:56 -04:00
Philippe Reynes
83f7078b68 cmd: ubi: add a command to rename volume
This commit adds the command ubi rename to rename an ubi volume.
The format of the command is: ubi rename <oldname> <newname>.
To enable this command, the option CMD_UBI_RENAME must be selected.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-20 06:34:56 +02:00
Heinrich Schuchardt
0563700672 Kconfig: fix typos in CMD_BEDBUG description
Fix documentation bug reported by 'make refcheckdocs'.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-17 12:32:36 -04:00
Yusuke Ashiduka
a17322329b cmd: Add unlz4 command
This command is a new command called "unlz4" that decompresses from memory
into memory.
Used with the CONFIG_CMD_UNLZ4 optionenabled.

Signed-off-by: Yusuke Ashiduka <ashiduka@fujitsu.com>
[trini: Use %zd / %zX not %ld / %lX in printf]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-17 12:32:12 -04:00
Keerthy
805b3cac1e lib: elf: Move the generic elf loading/validating functions to lib
Move the generic elf loading/validating functions to lib/
so that they can be re-used and accessed by code existing
outside cmd.

While at it remove the duplicate static version of load_elf_image_phdr
under arch/arm/mach-imx/imx_bootaux.c.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Suggested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-03-03 13:08:14 +05:30
Joel Johnson
72732318a9 cmd: mdc/mwc: normalize disjoint MX_CYCLIC usage
Both CMD_MX_CYCLIC and MX_CYCLIC are in use and defined in Kconfig,
but only the non-CMD version currently does anything. This changes all
usages to prefer the CMD_MX_CYCLIC option (since it's only affecting
addition of the commands), and switches defconfigs using the non-CMD
version to use the CMD version.

Signed-off-by: Joel Johnson <mrjoel@lixil.net>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-02-09 14:58:08 +01:00
Sam Protsenko
586a1bf5b2 doc: android: Convert to Sphinx format
Convert Android documentation from regular txt format to Sphinx (RST).
Also add Android index.rst file and reference it in root index.rst, so
that Android documentation is visible.

Test:

    $ make htmldocs
    $ xdg-open doc/output/index.html

Signed-off-by: Sam Protsenko <joe.skb7@gmail.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04 09:07:24 +05:30
Sam Protsenko
34b4319304 doc: android: Add documentation for Android Boot Image
Describe Android Boot Image format, how its support is implemented in
U-Boot and associated commands usage.

Signed-off-by: Sam Protsenko <joe.skb7@gmail.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04 09:07:24 +05:30
Sam Protsenko
94f6d0d1bd cmd: abootimg: Add abootimg command
This command can be used to extract fields and image payloads from
Android Boot Image. It can be used for example to implement boot flow
where dtb is taken from boot.img (as v2 incorporated dtb inside of
boot.img). Using this command, one can obtain needed dtb blob from
boot.img in scripting manner, and then apply needed dtbo's (from "dtbo"
partition) on top of that, providing then the resulting image to bootm
command in order to boot the Android.

Also right now this command has the sub-command to get an address and
size of recovery dtbo from recovery image (for non-A/B devices only,
see [1,2] for details).

It can be tested like this:

    => mmc dev 1
    => part start mmc 1 boot_a boot_start
    => part size mmc 1 boot_a boot_size
    => mmc read $loadaddr $boot_start $boot_size
    => abootimg get ver
    => abootimg dump dtb

[1] https://source.android.com/devices/bootloader/boot-image-header
[2] https://source.android.com/devices/architecture/dto/partitions

Signed-off-by: Sam Protsenko <joe.skb7@gmail.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04 09:07:24 +05:30
Baruch Siach
1c79f2ff88 cmd: add tlv_eeprom command
Add support for read/write of ONIE "Tlvinfo" EEPROM data format. TLV
stands for Type-Length-Value. The data format is described here:

  https://opencomputeproject.github.io/onie/design-spec/hw_requirements.html#board-eeprom-information-format

Based on U-Boot patch from the Open Compute project:

  ec87e872d4/patches/u-boot/common/feature-sys-eeprom-tlv-common.patch

Keep only I2C EEPROM support. Use the generic eeprom driver. Fix
checkpatch issues.

Add support for multiple EEPROM TLV stores on the same system. This is
useful in case of SOM and carrier that both provide ID and hardware
configuration information.

Add option to enable for SPL. This allows selection of RAM configuration
based on EEPROM stored board identification.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-01-21 15:56:15 +01:00
Simon Glass
015e3348fc common: Drop floppy disk support
This seems pretty old now. It has not been converted to driver model and
is not used by any boards.

Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17 13:26:50 -05:00
Eugeniu Rosca
b84acf1056 dtimg/am57xx_evm_defconfig: Rename dtimg to adtimg
Rename the existing 'dtimg' command to 'adtimg', in order to:
 - Suggest the Android origins and scope
 - Be consistent with the upcoming 'abootimg' command (naming
   suggested by Simon [*])

The change in _not_ backward compatible, but its benefits outweigh its
downsides, given that we don't expect active users of 'dtimg' today.

Perform the rename in several steps:
 1. Rename *.c file and Kconfig symbol. This should allow
    'git log --follow' to properly track the history of 'adtimg.c'
 2. 's/dtimg/adtimg/g' in the internal namespace of 'adtimg.c'

ELF comparison [**] before and after shows no functional change.

[*] https://patchwork.ozlabs.org/patch/1182212/#2291600
[**] diff -u <(objdump -d cmd/dtimg.o) <(objdump -d cmd/adtimg.o)

Cc: Tom Rini <trini@konsulko.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Simon Glass<sjg@chromium.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
2020-01-10 14:18:26 -05:00
Tom Rini
7086de4948 Pull request for UEFI sub-system for efi-2020-04-rc1
This pull request provides:
 
 * support for FIT images for UEFI binaries
 * drivers for hardware random number generators
 * an implementation of the EFI_RNG_PROTOCOL
 * a sub-command for efidebug to display configuration tables
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl4UvR4ACgkQxIHbvCwF
 GsRJZhAAmlsRBUS3fvFV5GtB8bkWcSU4/s3TVYJui0fOhY02ZDIKkrubZzDx/Lgv
 9OaVwjQ3JSmq5XkDmXqzNDzYkxitQ5Qf/cFiBF5HpA3USkOttb3GIfgj0qD6DGzM
 cKyhgJm7bZoMN/mkIzkWsry1ASwYpB3ipyoJAfRfryw9ok4j9RfJ7pPieeycGWGJ
 0sZsJI0v7e6xt5Qsytk5sZNvlCFhyhl2OMYliAlRKBryh31Ahr2e6KEwsJh7VyCP
 4K12eBTqIJq1qHk7Lr0g1CnMCdeOT8J7qvX1+kvt3HupxTMkYRv2AR5CQWRKck5E
 RsmcKmiTHz/76w6Gk7kLan7y0UCSHnfHQ3aSEkkx4O/v4OC85VteyLAEriS7J9Hx
 xSNyoj01U2wG3SLrUjkAZv6JgyC8uCezRzOHOqN25Q2mRROVq781mcMfRXwdq6cD
 L4rrTsIDPzNF19wDa7P5tK6JMF8BDifLNuMTQj5LdJYMHJTJZBWG/vTNFPEldaIP
 D9RPoCibTolpiuCYneeXJURHGm5yme7KoxAPiMU+fAWO1F6SO25zxYA7MAiY4OYw
 zk7Ipaat0luIu1gC2ICYxrLnsMBq9glABrdq99i0DpUg9n9N/7SpcJSj2DMrFGmY
 u4yenWM1KTgjLoVHRhpTbCzF15GlYN4SHXV5iYO+Pof5WQYnv8w=
 =SjPV
 -----END PGP SIGNATURE-----

Merge tag 'efi-2020-04-rc1' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for efi-2020-04-rc1

This pull request provides:

* support for FIT images for UEFI binaries
* drivers for hardware random number generators
* an implementation of the EFI_RNG_PROTOCOL
* a sub-command for efidebug to display configuration tables
2020-01-08 18:57:11 -05:00
Tom Rini
14a2dee765 cmd/Kconfig: Add more dependencies to OSE bootm support
Per Enea OSE documentation, it supports some classes of ARM, PowerPC and
X86.  Limit the option to those platforms.

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-08 09:27:44 -05:00
Heinrich Schuchardt
4f24ac08af cmd: add rng command
For the RNG uclass we currently only have a test working on the sandbox.

Provide a command to test the hardware random number generator on
non-sandbox systems.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07 18:08:21 +01:00
Cristian Ciocaltea
ecc7fdaa9e bootm: Add a bootm command for type IH_OS_EFI
Add support for booting EFI binaries contained in FIT images.
A typical usage scenario is chain-loading GRUB2 in a verified
boot environment.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07 18:08:21 +01:00