Commit Graph

34336 Commits

Author SHA1 Message Date
Marek Vasut
6af4e2782d usb: xhci: zynqmp: Removing unused function usb_phy_reset
This patch removes unsued function usb_phy_reset, rather common function
dwc3_phy_reset is used.

Signed-off-by: Marek Vasut <marex@denx.de>
2015-12-07 00:15:00 +01:00
Rajesh Bhagat
565b7f0fe1 usb: xhci: fsl: Removing unused function usb_phy_reset
This patch removes unsued function usb_phy_reset, rather common function
dwc3_phy_reset is used.

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@freescale.com>
2015-12-07 00:15:00 +01:00
Rajesh Bhagat
5955bb9345 usb: xhci: dwc3: Adding reset delay requirement as per dwc3 databook
As per dwc3 databook, delay is required before taking the core out of reset.
This delay is required so that the PHY are stable, and then we can take core
out of reset.

Reference is taken from linux dwc3 code, file: drivers/usb/dwc3/core.c.

Signed-off-by: Sriram Dash <sriram.dash@freescale.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@freescale.com>
2015-12-07 00:15:00 +01:00
Alexey Brodkin
90fbb2823a usb: add support for generic EHCI devices
This driver is meant to be used with any EHCI-compatible host
controller in case if there's no need for platform-specific
glue such as setup of controller or PHY's power mode via
GPIOs etc.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Marek Vasut <marex@denx.de>
2015-12-07 00:14:59 +01:00
Marek Vasut
40c920821d sunxi: usb: Rename the sunxi usb driver DM entry
The DM entry should be unique, otherwise it will collide with other
drivers. Fix this by assigning the driver a more unique name than
usb_ehci.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Ian Campbell <ijc@hellion.org.uk>
Cc: Simon Glass <sjg@chromium.org>
2015-12-07 00:14:59 +01:00
Marek Vasut
04f378798d usb: zynqmp: Fix build warnings
The driver does "return 0" in function with void type.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
2015-12-07 00:14:59 +01:00
Rajesh Bhagat
7310ac4961 drivers:usb:fsl: Add T4080 as affected soc for Erratum A007792 sw workaround
Apply Erratum A007792 sw workaround for T4080

Signed-off-by: Sriram Dash <sriram.dash@freescale.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@freescale.com>
Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
2015-12-07 00:14:59 +01:00
Felipe Balbi
c2ad4e1b9f usb: dwc3: fix build warnings
fix the following build warnings:

drivers/usb/dwc3/core.c: In function ‘dwc3_uboot_init’:
drivers/usb/dwc3/core.c:625:6: warning: ‘dev’ is used uninitialized in this function [-Wuninitialized]
mem = devm_kzalloc(dev, sizeof(*dwc) + DWC3_ALIGN_MASK, GFP_KERNEL);
        ^
drivers/usb/dwc3/dwc3-omap.c: In function ‘dwc3_omap_uboot_init’:
drivers/usb/dwc3/dwc3-omap.c:380:7: warning: ‘dev’ is used uninitialized in this function [-Wuninitialized]
omap = devm_kzalloc(dev, sizeof(*omap), GFP_KERNEL);

Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-12-07 00:14:59 +01:00
Felipe Balbi
9dc522249a usb: host: xhci-omap: fix build break
Fix the following build break:

drivers/usb/host/xhci-omap.c:35:5: error: ‘board_usb_init’ aliased to external symbol ‘__board_usb_init’
 int board_usb_init(int index, enum usb_init_type init)
      ^

Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-12-07 00:14:59 +01:00
Siva Durga Prasad Paladugu
0f676767b6 usb: zynqmp: Enable USB XHCI support
Enable USB XHCI support for ZynqMP

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
2015-12-07 00:14:59 +01:00
Siva Durga Prasad Paladugu
f4dd69ca82 usb: zynqmp: Add XHCI driver support
Added USB XHCI driver support for zynqmp.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
2015-12-07 00:14:59 +01:00
Tom Rini
75507d5d54 am33xx: Update serial pdata
We now want to make sure that we have the platform data for NS16550 when
we do not have OF_CONTROL set.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-12-06 16:38:05 -05:00
Thomas Chou
f118fe5cf9 altera_qspi: fix erase and write error code
Fix erase and write error code, which should be "protected".

From the "Embedded Peripherals IP User Guide" of Altera,

The "Illegal write" flag indicates that a write instruction is
targeting a protected sector on the flash memory. This bit is
set to indicate that the IP has cancelled a write instruction.

The "Illegal erase" flag indicates that an erase instruction has
been set to a protected sector on the flash memory. This bit is
set to indicate that the IP has cancelled the erase instruction.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Chin Liang See <clsee@altera.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-12-06 11:31:29 +08:00
Thomas Chou
421f306f2c altera_qspi: add lock unlock ops
Add lock() and unlock() mtd ops to altera_qspi.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Chin Liang See <clsee@altera.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-12-06 11:31:25 +08:00
Simon Glass
878a3ed9ad dm: tegra: Provide serial platform data for SPL
At present an incorrect #if term is preventing this data from being compiled
in. All tegra boards use driver model for serial, so we can just drop this.

Fixes: fde7e18938 ("dm: tegra: pci: Move CONFIG_PCI_TEGRA to Kconfig")
Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Thomas Chou <thomas@wytron.com.tw>
2015-12-05 18:22:38 -05:00
Simon Glass
b7e5a6439f dm: serial: ns16550: Add pre-reloc flag to the driver
For platforms that don't use device tree in SPL the only way to mark this
driver as 'required by relocation' is with the DM_FLAG_PRE_RELOC flag. Add
this to ensure that the driver is bound.

Fixes: fde7e18938 ("dm: tegra: pci: Move CONFIG_PCI_TEGRA to Kconfig")
Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Thomas Chou <thomas@wytron.com.tw>
2015-12-05 18:22:38 -05:00
Simon Glass
7705bdfcd7 tegra: Remove merge markers in some Kconfig files
These were added by mistake in commit fde7e189. They cause a warning when
configuring the boards. Remove them.

Fixes: fde7e18938 ("dm: tegra: pci: Move CONFIG_PCI_TEGRA to Kconfig")
Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Reported-by: Kevin Hilman <khilman@linaro.org>
Acked-by: Thomas Chou <thomas@wytron.com.tw>
2015-12-05 18:22:37 -05:00
Stephen Warren
af7c03ea88 rpi: add support for Raspberry Pi Zero
For U-Boot's purposes, at present all we care about is ensuring there's
a model table entry.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2015-12-05 18:22:36 -05:00
Stephen Warren
c4ea1edb70 rpi: fix revision scheme parsing
The RPi has two different schemes for encoding board revision values.
When adding RPi 2 support, I thought that the conflicting type field
values were to be interpreted based on bcm2835-vs-bcm2836. In fact, the
scheme bit determines the encoding. The RPi Zero uses the bcm2835 yet
uses the new encoding scheme. Fix the code to cater for this correctly.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2015-12-05 18:22:36 -05:00
Stephen Warren
dbe6f1eb93 rpi: get rid of BCM2835_BOARD_REV_* macros
There are two numbering schemes for the RPi revision values; old and new
scheme. The values within each scheme overlap. Hence, it doesn't make
sense to have absolute/global names for the revision IDs. Get rid of the
names and just use the raw revision/type values to set up the array of
per-revision data.

This change makes most sense when coupled with the next change. However,
it's split out so that the mechanical cut/paste is separate from the
logic changes for easier review and problem bisection.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2015-12-05 18:22:35 -05:00
Philippe De Swert
6ae6e16005 mkimage : Fix generating multi and script images
Seems 92a655c3 broke creating multi and script type images.
Since the file1:file2:file3 string does not get split up,
it fails on trying to open an non-existing file.

mkimage -A arm -O linux -T multi -C none -d zImage:splash.bmp:device.dtb uimage
tools/mkimage: Can't open zImage:splash.bmp:device.dtb: No such file or directory

Since the sizes of the different parts seem to get added in the actual
routine that handles multi and script type images, we can probably skip the
bit of the code that causes the failure for that type of images.

Signed-off-by: Philippe De Swert <philippedeswert@gmail.com>
2015-12-05 18:22:35 -05:00
Siva Durga Prasad Paladugu
e9acb9ea43 common: board: Dont relocate FDT incase of CONFIG_OF_EMBED
Don't relocate fdt in case of CONFIG_OF EMBED as the fdt is
already embedded with u-boot image.
Update fdt_blob after relocation as the fdt will be copied
during u-boot relocation.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com> (QEMU x86)
Tested-by: Thomas Chou <thomas@wytron.com.tw> (Nios2)
Acked-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Simon Glass <sjg@chromium.org>
2015-12-05 18:22:34 -05:00
Simon Glass
b4857aa901 spl: mmc: Unify non/driver model spl_mmc_find_device()
It is risky to have two different functions with much the same code. Future
authors may update one but not the other. It is hard to see which parts are
the same and which are different.

Unify the functions and drop the differences that are not really needed.

Note that one puts() becomes printf() as Tom mentioned that this does not
affect image size:

https://patchwork.ozlabs.org/patch/537276/

Note: It would be better to have an empty printf() and avoid the #ifdef for
CONFIG_SPL_LIBCOMMON_SUPPORT.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Michal Simek <michal.simek@xilinx.com>
2015-12-05 18:22:34 -05:00
Simon Glass
99c7a51a24 spl: mmc: Rename 'mmc' variable to 'mmcp'
The 'p' suffix makes it more obvious that we are dealing with a pointer
to a (pointer) value that will be returned to its caller.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Nikita Kiryanov <nikita@compulab.co.il>
Tested-by: Michal Simek <michal.simek@xilinx.com>
2015-12-05 18:22:33 -05:00
Simon Glass
d773a008ee spl: mmc: Fix compiler warning with CONFIG_DM_MMC
Since commit 4188ba3 we get the following warning on rockchip boards:

common/spl/spl_mmc.c:31:24: warning: ‘mmc’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  count = mmc->block_dev.block_read(0, sector, 1, header);
                        ^
common/spl/spl_mmc.c:251:14: note: ‘mmc’ was declared here
  struct mmc *mmc;

Correct this by move the variable init earlier.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Nikita Kiryanov <nikita@compulab.co.il>
2015-12-05 18:22:33 -05:00
Nishanth Menon
9cb05a8f9f drivers: remoteproc: rproc-uclass: Fix check for NULL pointers
Neither uc_pdata->name nor check_name are supposed to be NULL in
_rproc_name_is_unique(). if uc_pdata->name is NULL, we are not
intialized yet, however if check_data is NULL, we do not have
proper data. Further, if either were NULL, strlen will crap out
while attempting to derefence NULL.

Instead, just check if either of these are NULL and bail out.

This should also fix the following coverity scan warnings:
*** CID 132281:  Null pointer dereferences  (FORWARD_NULL)
/drivers/remoteproc/rproc-uclass.c: 73 in _rproc_name_is_unique()

Reported-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
2015-12-05 18:22:32 -05:00
Kamil Lulko
5be9356926 Change e-mail address of Kamil Lulko
Signed-off-by: Kamil Lulko <kamil.lulko@gmail.com>
2015-12-05 18:22:32 -05:00
Thomas Chou
80e0614670 ns16550: change reg-shift property default to zero
Change reg-shift property default to zero. When the integer property
is missing, it should be taken as zero. This is consistent to Linux
drivers/tty/serial/of_serial.c.

The x86 and most powerpc use reg-shift of 0. Most others use reg-shift
of 2. While reg-shift of 1 is rarely used.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-12-05 18:22:29 -05:00
Tom Rini
eada086f85 arch/arm/cpu/arm920t/ep93xx/led.c: Mark inline functions as static inline
With gcc-5.x we get warning about inline non-static functions referring to
static elements.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-12-05 18:22:28 -05:00
Peng Fan
c6bb23c819 common: cli_hush: avoid memory leak
Need to free memory avoid memory leak, when error.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
2015-12-05 18:22:28 -05:00
Stefan Roese
63ce348d27 common/Makefile: Compile fdt_support is enabled in SPL
When CONFIG_SPL_OF_TRANSLATE is enabled fdt_support.c needs to get
compiled. Otherwise fdt_translate_address() is missing which is needed
in dev_get_addr().

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-12-05 18:22:27 -05:00
Mugunthan V N
4d5bb01e1f defconfig: dra74_evm: enable serial driver model
Enable serial driver model for dra74_evm as ns16550 supports
driver model.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-12-05 18:22:27 -05:00
Mugunthan V N
0935df6539 arm: dts: dra7-evm: add chosen node to specify serial console device
Introduce chosen node and specify uart0 to be used as serial console.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-12-05 18:22:26 -05:00
Mugunthan V N
85cf0e6299 arm: dts: omap: add reg-shift to serial device tree node
With the commit 'c7b9686d5d48 ("ns16550: unify serial_omap")' all
TI platforms are broken with DM/DT boot as ns16550 driver expects
reg-shift from DT which is not populated for TI platforms.
Earlier it worked as it was hard coded to 2 in serial-omap
driver. So adding the reg-shift to serial nodes for dra7, am4372
and am33xx dtsi files. Tested this patch on am437x-sk-evm,
am437x-gp-evm, am335x-boneblack, dra74x-evm and dra72x-evm.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Thomas Chou <thomas@wytron.com.tw>
2015-12-05 18:22:25 -05:00
Peng Fan
746da1bd42 common: miiphyutil: avoid memory leak
The following code will alloc memory for new_dev and ldev:
"
new_dev = mdio_alloc();
ldev = malloc(sizeof(*ldev));
"
Either new_dev or ldev is NULL, directly return, but this may leak memory.
So before return, using free(ldev) and mdio_free(new_dev) to avoid
leaking memory, also free can handle NULL pointer.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-12-05 18:22:24 -05:00
Peng Fan
678e9316d4 common: mmc: unsigned char compared against 0
"enable" is unsigned char type and its value will not be
negative, so discard "enable < 0".

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Cc: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-12-05 18:22:24 -05:00
Marek Vasut
9f8edb7651 eeprom: Zap CONFIG_SYS_I2C_MULTI_EEPROMS
This symbol is no longer used anywhere, remove it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Acked-by: Heiko Schocher <hs@denx.de>
2015-12-05 18:22:24 -05:00
Vagrant Cascadian
1b25e586cb Fix typo: firstly -> first.
Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Acked-by: Marek Vasut <marex@denx.de>
2015-12-05 18:22:23 -05:00
Vagrant Cascadian
3f42dc87b4 Fix typo: commmand -> command.
Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2015-12-05 18:22:21 -05:00
Wolfgang Denk
e5d3078622 mpc8xx: remove stale "lwmon" files
Commit acc2372d "mpc8xx: remove lwmon board support" removed support
for the MPC823 based "lwmon" board, but left some board specific POST
files.  This patch cleans up and removes the now unused files.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2015-12-05 18:22:16 -05:00
Peng Fan
d39449b110 common: miiphyutil: no need to check name of mii_dev
The entry name of mii_dev is an array not pointer, so
no need to check.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-12-05 18:22:15 -05:00
Peng Fan
2ea47be02f common: image-fdt: correct fdt_blob for IMAGE_FORMAT_LEGACY
If condition of "(load == image_start || load == image_data)" is true,
should use "fdt_addr = load;", but not "fdt_blob = (char *)image_data;",
or fdt_blob will be overridden by "fdt_blob = map_sysmem(fdt_addr, 0);"
at the end of the switch case.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Max Krummenacher <max.krummenacher@toradex.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Suriyan Ramasami <suriyan.r@gmail.com>
Cc: Paul Kocialkowski <contact@paulk.fr>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-12-05 18:22:15 -05:00
Peng Fan
aa72252963 common: cli_hush: avoid dead code
Condition "(value == NULL && ++value == NULL)" actully will
always return false.

Instead, use condition "(value == NULL || *(value + 1) == 0)" to detect
such expression "c=". To "c=", *(value + 1) is 0, so directly return -1,
but not continue.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Rabin Vincent <rabin@rab.in>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-12-05 18:22:14 -05:00
Peng Fan
bc3c89b130 common: bootm: check return value of strict_strtoul
Before continue, check return value of strict_strtoul.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Simon Glass <sjg@chromium.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: York Sun <yorksun@freescale.com>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-12-05 18:22:12 -05:00
Tom Rini
9eed48c8be Merge branch 'master' of http://git.denx.de/u-boot-sparc 2015-12-04 17:50:34 -05:00
Tom Rini
a85670e40d Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2015-12-04 08:21:28 -05:00
Francois Retief
7a4fb11b85 sparc: Remove non-generic board init files: board.c, time.c
Remove the board.c and time.c files and all associated non-generic board
initialization code.

Signed-off-by: Francois Retief <fgretief@spaceteq.co.za>
2015-12-03 13:15:50 +02:00
Daniel Hellstrom
f376c42f3b sparc: leon3: Added busy wait function, made wait_ms() work when IRQ is disabled
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
2015-12-03 13:15:49 +02:00
Daniel Hellstrom
6c4359aa72 sparc: leon3: Added CPU count and frequency detection.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
2015-12-03 13:15:49 +02:00
Daniel Hellstrom
36594a1dfb sparc: Removed USB stop from linux bootm, arch-independent bootm stop USB
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
2015-12-03 13:15:49 +02:00