Simon Glass
d07dc4993d
Tegra2: Use clock and pinmux functions to simplify code
...
Signed-off-by: Simon Glass <sjg@chromium.org>
2011-09-04 11:36:15 +02:00
Simon Glass
858bd095e1
Tegra2: Add additional pin multiplexing features
...
This adds an enum for each pin and some functions for changing the pin
muxing setup.
Signed-off-by: Simon Glass <sjg@chromium.org>
2011-09-04 11:36:15 +02:00
Simon Glass
b4ba2be8dc
Tegra2: Add more clock support
...
This adds functions to enable/disable clocks and reset to on-chip peripherals.
Signed-off-by: Simon Glass <sjg@chromium.org>
2011-09-04 11:36:15 +02:00
Simon Glass
39d3416f0a
Tegra2: Add microsecond timer function
...
These functions provide access to the high resolution microsecond timer
and tidy up a global variable in the code.
Signed-off-by: Simon Glass <sjg@chromium.org>
2011-09-04 11:36:15 +02:00
Wolfgang Denk
1c85752258
ARM: remove broken "at91rm9200dk" board
...
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-04 11:36:15 +02:00
Wolfgang Denk
b1a2bd4bb3
ARM: remove broken "m501sk" board
...
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-04 11:36:15 +02:00
Wolfgang Denk
5bd3814bb7
ARM: remove broken "kb9202" board
...
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-04 11:36:14 +02:00
Wolfgang Denk
d14af08466
ARM: remove broken "csb637" board
...
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-04 11:36:14 +02:00
Wolfgang Denk
37a9b4d0b7
ARM: remove broken "cmc_pu2" board
...
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-04 11:36:14 +02:00
Wolfgang Denk
b550834458
ARM: remove broken "at91cap9adk" board
...
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stelian Pop <stelian.pop@leadtechdesign.com>
2011-09-04 11:36:14 +02:00
Wolfgang Denk
1b793a472e
ARM: remove broken "voiceblue" board
...
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-04 11:36:14 +02:00
Wolfgang Denk
ad218a868b
ARM: remove broken "smdk2400" board
...
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Gary Jennejohn <garyj@denx.de>
2011-09-04 11:36:14 +02:00
Wolfgang Denk
1f7f0edd3c
ARM: remove broken "sbc2410x" board
...
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-04 11:36:14 +02:00
Wolfgang Denk
6ea2405489
ARM: remove broken "netstar" board
...
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-04 11:36:14 +02:00
Wolfgang Denk
69624195a3
ARM: remove broken "mx1fs2" board
...
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-04 11:36:13 +02:00
Wolfgang Denk
957731eda0
ARM: remove broken "lpd7a40x" boards
...
Remove lpd7a400 and lpd7a404 boards.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-04 11:36:13 +02:00
Wolfgang Denk
716f7ade10
ARM: remove broken "edb93xx" boards
...
Remove edb9301, edb9302, edb9302a, edb9307, edb9307a, edb9312,
edb9315 and edb9315a boards.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-04 11:36:13 +02:00
Wolfgang Denk
5dcf53696f
ARM: remove broken "B2" board
...
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Andrea Scian <andrea.scian@dave-tech.it>
2011-09-04 11:36:13 +02:00
Wolfgang Denk
be28857072
ARM: remove broken "armadillo" board
...
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Rowel Atienza <rowel@diwalabs.com>
2011-09-04 11:36:13 +02:00
Wolfgang Denk
c91e90db8c
ARM: remove broken "assabet" board
...
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: George G. Davis <gdavis@mvista.com>
2011-09-04 11:36:13 +02:00
Stefano Babic
689d0fa36a
ARM: versatile: drop warnings
...
Drop warning: "passing argument 1 of 'get_ram_size'
discards qualifiers from pointer target type"
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Albert Aribaud <albert.u.boot@aribaud.net>
2011-09-04 11:36:13 +02:00
Stefano Babic
a410d0a343
IMX: scb9328: drop warnings
...
Drop warning: "passing argument 1 of 'get_ram_size'
discards qualifiers from pointer target type"
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Torsten Koschorrek <koschorrek@synertronixx.de>
2011-09-04 11:36:13 +02:00
Stefano Babic
87e14f0f56
MX31: imx31_litekit: make use of GPIO framework
...
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-04 11:36:13 +02:00
Stefano Babic
5bd9a9b01b
MX31: mx31ads: make use of GPIO framework
...
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-04 11:36:12 +02:00
Stefano Babic
753fc2ebf9
MX5: mx51evk: make use of GPIO framework
...
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-04 11:36:12 +02:00
Stefano Babic
a4adedd439
MX35: mx35pdk: make use of GPIO framework
...
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-04 11:36:12 +02:00
Stefano Babic
50410078cd
MX5: mx53loco: make use of GPIO framework
...
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Jason Liu <r64343@freescale.com>
2011-09-04 11:36:12 +02:00
Stefano Babic
f7a364745e
MX5: mx53evk: make use of GPIO framework
...
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Jason Liu <r64343@freescale.com>
2011-09-04 11:36:12 +02:00
Stefano Babic
4c0443c41f
MX5: vision2: make use of GPIO framework
...
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-04 11:36:12 +02:00
Stefano Babic
04e25fd629
MX5: mx53smd: make use of GPIO framework
...
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Fabio Estevam <fabio.estevam@freescale.com>
2011-09-04 11:36:12 +02:00
Stefano Babic
00c07fe692
MX5: mx53ard: make use of GPIO framework
...
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Fabio Estevam <fabio.estevam@freescale.com>
2011-09-04 11:36:12 +02:00
Stefano Babic
7caa655f74
MX25: zmx25: make use of GPIO framework
...
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Matthias Weisser <weisserm@arcor.de>
2011-09-04 11:36:12 +02:00
Stefano Babic
e70a10607d
MX5: efikamx: make use of GPIO framework
...
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Marek Vasut <marek.vasut@gmail.com>
2011-09-04 11:36:12 +02:00
Stefano Babic
9400f59267
MX31: QONG: make use of GPIO framework
...
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-04 11:36:11 +02:00
Stefano Babic
729b74add9
MX35: make use of GPIO framework for MX35 processor
...
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-04 11:36:11 +02:00
Stefano Babic
7d8d0b1a4a
MX5: make use of GPIO framework for MX5 processor
...
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-04 11:36:11 +02:00
Stefano Babic
6cb2e774f2
MX31: make use of GPIO framework for MX31 processor
...
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-04 11:36:11 +02:00
Stefano Babic
41eca7416c
MX25: make use of GPIO framework for MX25 processor
...
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-04 11:36:11 +02:00
Stefano Babic
d8e0ca851b
IMX: uniform GPIO interface using GPIO framework
...
IMX processors has a slightly different interface
to access GPIOs and do not make use of the provided GPIO
framework. The patch substitutes mxc_ specific
functions and make use of the API in asm/gpio.h
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-04 11:36:11 +02:00
Stefano Babic
7acec25948
MX: MX35 / MX5: uniform clock command with powerpc
...
There was already a command to show the processor clocks
for PowerPC (clocks). For i.MX, the "clockinfo" command
was introduce. The patch sets the same command name used on
PowerPC.
A nasty and not needed newline is also dropped in the help for
the command.
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-04 11:36:11 +02:00
Stefano Babic
6b5acfc121
MX35: MX35PDK: support additional RAM on CSD1
...
Modules on mx35pdk have additional 128MB
memory connected to CSD1.
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-04 11:36:11 +02:00
Fabio Estevam
9691c5b96d
mx53: ddr3: Update DD3 initialization
...
Updated mx53 ddr3 script in order to align with the latest Freescale version from July 8, 2011:
-change ESDREF[REF_SEL]=01 (for 32KHz), from incorrect setting of 00 (64KHz)
-change DDR3 MR0 write to "setmem /32 0x63fd901c = 0x052080b0" from
"0x092080b0". This changes write recovery from 8 clocks to 6 clocks
(in line with ESDCFG1[tWR])
Signed-off-by: Lily Zhang <r58066@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-09-04 11:36:11 +02:00
David Jander
9db1bfa110
ARM: MX51: PLL errata workaround
...
This is a port of the official PLL errata workaround from Freescale to
mainline u-boot.
The PLL's in the i.MX51 processor can go out of lock due to a metastable
condition in an analog flip-flop when used at high frequencies.
This workaround implements an undocumented feature in the PLL (dither
mode), which causes the effect of this failure to be much lower (in terms
of frequency deviation), avoiding system failure, or at least decreasing
the likelihood of system failure.
Signed-off-by: David Jander <david@protonic.nl>
2011-09-04 11:36:11 +02:00
Stefano Babic
96c9745fa1
ARM: versatilepb : drop warnings due to double definitions
...
CONFIG_ARCH_VERSATILE_PB is defined twice - drop
the define from config.h.
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-04 11:36:06 +02:00
Aneesh V
f89f6109e9
omap4: increase SRAM budget to fix build error
...
Signed-off-by: Aneesh V <aneesh@ti.com>
Cc: Dirk Behme <dirk.behme@googlemail.com>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Acked-by: Dirk Behme<dirk.behme@googlemail.com>
2011-09-04 11:34:30 +02:00
Aneesh V
34455b04fc
omap4: fix build warning due to signed unsigned comparison
...
Signed-off-by: Aneesh V <aneesh@ti.com>
2011-09-04 11:34:09 +02:00
Dirk Behme
8fcf5959a8
mkimage: Fix 'Unknown OMAP image type - 5'
...
Using mkimage with e.g.
tools/mkimage -A arm -T firmware -O u-boot -d u-boot.bin foo.img
gives a warning
"Unknown OMAP image type - 5"
while it seems that the image itself is created successfully.
This does come from the patch "mkimage: Add OMAP boot image support".
The method check_image_type in image_type_params is supposed to just
return success or failure. However, for omap it also calls fprintf:
static int omapimage_check_image_types(uint8_t type)
{
if (type == IH_TYPE_OMAPIMAGE)
return EXIT_SUCCESS;
else {
fprintf(stderr, "Unknown OMAP image type - %x", type);
return EXIT_FAILURE;
}
}
All the other image checkers and no others have this, so the fix is to
simply remove the fprintf.
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
CC: John Rigby <john.rigby@linaro.org>
CC: Aneesh V <aneesh@ti.com>
CC: Sandeep Paulraj <s-paulraj@ti.com>
2011-09-04 11:34:00 +02:00
Aneesh V
080a46eaf1
omap: fix gpio related build breaks
...
Signed-off-by: Aneesh V <aneesh@ti.com>
Acked-by: Dirk Behme <dirk.behme@googlemail.com>
2011-09-04 11:33:36 +02:00
Łukasz Majewski
c8fc4284cf
gpio:samsung: s5p_ suffix add for GPIO functions (C210_universal)
...
This is a cosmetic patch, which is changing the gpio_ prefix to
s5p_gpio_.
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2011-09-03 22:40:47 +02:00
Chander Kashyap
beb7f27a0d
SMDKV310: MMC SPL: Remove unwanted dummy functions
...
Removed dummy functions in "mmc_spl/board/samsung/smdkv310/mmc_boot.c",
@mmc_boot.c
void do_undefined_instruction(struct pt_regs *pt_regs);
void do_software_interrupt(struct pt_regs *pt_regs);
void do_prefetch_abort(struct pt_regs *pt_regs);
void do_data_abort(struct pt_regs *pt_regs);
void do_not_used(struct pt_regs *pt_regs);
void do_fiq(struct pt_regs *pt_regs);
void do_irq(struct pt_regs *pt_regs);
not required as called conditionally in start.S
@start.S
\#ifdef CONFIG_SPL_BUILD
_undefined_instruction: .word _undefined_instruction
_software_interrupt: .word _software_interrupt
_prefetch_abort: .word _prefetch_abort
_data_abort: .word _data_abort
_not_used: .word _not_used
_irq: .word _irq
_fiq: .word _fiq
_pad: .word 0x12345678 /* now 16*4=64 */
\#else
_undefined_instruction: .word undefined_instruction
_software_interrupt: .word software_interrupt
_prefetch_abort: .word prefetch_abort
_data_abort: .word data_abort
_not_used: .word not_used
_irq: .word irq
_fiq: .word fiq
_pad: .word 0x12345678 /* now 16*4=64 */
\#endif
e.g.
undefined_instruction:
get_bad_stack
bad_save_user_regs
bl do_undefined_instruction
Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
2011-09-03 22:40:47 +02:00