Commit Graph

6566 Commits

Author SHA1 Message Date
Becky Bruce
c1e1cf6954 mpc86xx: Use SRR0/1/rfi to enable address translation, not blr
Using a mtmsr/blr means that you have to be executing at the
same virtual address once you enable translation.  This is
unnecessarily restrictive, and is not really how this is
usually done.  Change it to use the more common mtspr SRR0/SRR1
and rfi method.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-10 10:10:03 -06:00
Becky Bruce
6bf98b1362 mpc8641: make DIAG_ADDR == FLASH_BASE
Currently, that's what it is, but it's hardcoded.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-10 10:10:03 -06:00
Becky Bruce
170deacb1d mpc8641: Drop imaginary second flash bank, map 8MB
There's a lot of setup and foo for the second flash
bank.  The problem is, this board doesn't actually have one.
Clean this up.  Also, the flash is 8M in size.  Get rid
of the confusing aliased overmapping, and just map 8M.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-10 10:10:03 -06:00
Becky Bruce
0f2d66027b mpc8641: only define CONFIG_ENV_SIZE once
It's currently defined twice inside in an if/else block, but
both halves set the same value.  Move the define outside
the if.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-10 10:10:02 -06:00
Becky Bruce
24bfb48c35 mpc86xx: Move setup_bats into cpu_init_f
In order to later allow for a physical relocation of the
flash, setup_bats, which sets up the final BAT mapping
for the board, needs to happen *after* init_laws().
Otherwise, there will be no window programmed for the flash
at the new physical location at the point when we change
the mmu translation.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-10 10:10:02 -06:00
Becky Bruce
05df3e5a63 mpc8641: Remove extra "0" from BR2 define
Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-10 10:10:01 -06:00
Jon Loeliger
33211469f7 Merge commit 'wd/master' 2008-11-10 10:04:51 -06:00
Wolfgang Denk
1378174a13 Merge branch 'master' of /home/wd/git/u-boot/custodians 2008-11-09 00:33:44 +01:00
Wolfgang Denk
2e4dcb64d1 Merge branch 'master' of git://git.denx.de/u-boot-arm 2008-11-09 00:33:10 +01:00
Wolfgang Denk
bad4d11221 Merge branch 'master' of /home/wd/git/u-boot/custodians 2008-11-09 00:10:03 +01:00
Wolfgang Denk
23b7b87a37 Merge branch 'master' of git://git.denx.de/u-boot-at91 2008-11-09 00:09:51 +01:00
Wolfgang Denk
ac4aeb1735 Merge branch 'master' of /home/wd/git/u-boot/custodians 2008-11-09 00:01:59 +01:00
Wolfgang Denk
c06d9bbbeb Merge branch 'master' of git://git.denx.de/u-boot-coldfire 2008-11-09 00:01:42 +01:00
Stelian Pop
d8003fa037 AT91: Replace AT91_BASE_EMAC by the board specific values.
AT91_BASE_EMAC is never used outside the board specific files,
so replace its usage by the board specific AT91xxx_BASE_EMAC.

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-11-07 13:54:31 +01:00
Stelian Pop
c91e17affa AT91: Replace (undefined) AT91_ID_US* by the board specific values.
AT91_ID_US0 / AT91_ID_US1 / AT91_ID_US2 were used but never defined.
Since they are never used outside the board specific files, they can
be replaced by the board specific AT91xxx_ID_US0 / AT91xxx_ID_US1 /
AT91xxx_ID_US2.

Bug spotted by Jesus Alvarez <jalvarez@micromint.com>.

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-11-07 12:09:21 +01:00
Jean-Christophe PLAGNIOL-VILLARD
28962f5a2d Makefile/at91sam9: move some at91sam9 to the correct subsection for arm926ejs
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-11-04 23:47:17 +01:00
Sergey Lapin
1079432e04 Custom AFEB9260 board support
This patch provides support for AFEB9260 board, a product of
OpenSource hardware and software. Some commertial projects
are made with this design. A board is basically AT91SAM9260-EK
with some modifications and different peripherals and different
parts used. Main purpose of this project is to gain experience in
hardware design.
More info: http://groups.google.com/group/arm9fpga-evolution-board
(In Russian only, sorry).
Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb

Signed-off-by: Sergey Lapin <slapin@ossfans.org>
2008-11-04 23:47:17 +01:00
Tomohiro Masubuchi
26eecd24f9 Change to use "do_div" macro
Signed-off-by: Tomohiro Masubuchi <tomohiro_masubuchi@tripeaks.co.jp>
2008-11-04 23:40:05 +01:00
Roman Mashak
e352495318 ARM926EJ-S: relocate OMAP specific 'cpuinfo.c' into OMAP directory
OMAP identification is implemented in 'cpuinfo.c' and located in ARM926EJ-S directory.
It makes sense to place this file in OMAP specific subdirectory, i.e. cpu/arm926ejs/omap

Signed-off-by: Roman Mashak <romez777@gmail.com>
2008-11-04 23:40:05 +01:00
Roman Mashak
248b2c3672 ARM/Versatile port: Removed unused functions
Removal of never used functions.

Signed-off-by: Roman Mashak <romez777@gmail.com>
2008-11-04 23:40:05 +01:00
Becky Bruce
1266df8877 powerpc: change 86xx SMP boot method
We put the bootpg for the secondary cpus into memory and use
BPTR to get to it.  This is a step towards converting to the
ePAPR boot methodology.  Also, the code is written to
deal properly with more than 4GB of RAM.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-04 10:58:50 -06:00
Becky Bruce
b543156068 8641HPCN: Config file cleanup
There are several items in the config file that were hardcoded
but that should really be based on other config options, since
the regions are contiguous and depend on being so.  This cleans
that up a bit.  Also, add BR_PHYS_ADDR() macro to convert
addresses into the proper format for BR registers.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-03 11:05:01 -06:00
Becky Bruce
4c77de3f14 86xx: Make dram_size a phys_size_t
It's currently a long and should be phys_size_t.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-03 11:05:01 -06:00
Becky Bruce
104992fc54 powerpc 86xx: Handle CCSR relocation earlier
Currently, the CCSR gets relocated while translation is
enabled, meaning we need 2 BAT translations to get to both the
old location and the new location.  Also, the DEFAULT
CCSR location has a dependency on the BAT that maps the
FLASH region.  Moving the relocation removes this unnecessary
dependency. This makes it easier and more intutive to
modify the board's memory map.

Swap BATs 3 and 4 on 8610 so that all 86xx boards use the same
BAT for CCSR space.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-03 11:05:00 -06:00
Becky Bruce
af5d100e8d mpc8641: Make PCI and RIO mutually exclusive, fix non-PCI build
You can't actually have both, and with some coming changes to
change the memory map for the board and support 36-bit physical,
we need the extra BAT that is being consumed by having both.

I also make non-PCI configs build cleanly, for the sake of sanity.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-03 11:04:59 -06:00
Becky Bruce
98693b85d4 mpc8641: Stop supporting non-PCI_PNP configs
We don't actually ever do this, remove the code so we
can stop maintaining it.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-03 11:04:59 -06:00
TsiChung Liew
e4f69d1bd2 ColdFire: Fix M5329EVB and M5373EVB nand issue
Fix compilation issue caused by a few mismatches.
Provide proper nand chip select enable/disable in
nand_hwcontrol() rather than in board_nand_init()
just enable once. Remove redundant local nand driver
functions - nand_read_byte(), nand_write_byte() and
nand_dev_ready() to use common nand driver.

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-11-03 09:45:59 -07:00
TsiChung Liew
1b27084422 ColdFire: Fix compilation error
The error was caused by the change for strmhz() in cpu.c.
A few of them were one extra close parenthesis.

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-11-03 09:45:58 -07:00
TsiChung Liew
536e7dac16 ColdFire: Add MCF5301x CPU and M53017EVB support
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-11-03 09:45:58 -07:00
TsiChung Liew
a21d0c2cc9 ColdFire: Add SBF support for M52277EVB
Add serial boot support

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-11-03 09:45:58 -07:00
TsiChung Liew
b202816c61 ColdFire: Use CFI driver for M5272C3
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-11-03 09:45:58 -07:00
TsiChung Liew
f3962d3f57 ColdFire: Relocate FEC's GPIO and mii functions protocols
Place FEC pin assignments in cpu_init.c from platform's
mii.c

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-11-03 09:45:58 -07:00
TsiChung Liew
6e80f5aa09 ColdFire: Remove platforms mii.c file
Will use mcfmii.c driver in drivers/net rather than
keep creating new mii.c for each future platform.
Remove EB+MCF-EV123, cobra5272, idmr, M5235EVB,
M5271EVB, M5272C3, M5275EVB, M5282EVB, M5329EVB,
M5373EVB, M54451EVB, M54455EVB, M547xEVB, and M548xEVB's
mii.c

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-11-03 09:45:58 -07:00
TsiChung Liew
012522fef3 ColdFire: Modules header files cleanup
Consolidate ATA, ePORT, QSPI, FlexCan, PWM, RNG,
MDHA, SKHA, INTC, and FlexBus structures and
definitions in immap_5xxx.h to more unify modules
header files. Append DSPI support for m547x_8x.
SSI cleanup. Remove USB Host structure from immap_539.h.
Apply changes to use FlexBus structures in mcf52x2's
cpu_init.c and platform configuration files.

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-11-03 09:45:58 -07:00
TsiChung Liew
ac2331aee9 ColdFire: Remove linker file
Each different build for M54455EVB and M5235EVB will
create a u-boot.lds linker file. It is redundant to
keep the u-boot.lds

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-11-03 09:45:58 -07:00
Peter Tyser
0829323073 ppc: Fix compile warnings when !CONFIG_OF_LIBFDT
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2008-11-02 16:39:31 +01:00
Jean-Christophe PLAGNIOL-VILLARD
a80b21d512 common/Makefile: create others group for non core, environment and command files
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-11-02 16:33:07 +01:00
Wolfgang Denk
60c68d9c1c TQM8260: use CFI flash driver instead of custom driver.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-11-02 16:24:16 +01:00
Andy Fleming
20d04774f4 Consolidate MAX/MIN definitions
There were several, now there is one (two if you count the lower-case
versions).

Signed-off-by: Andy Fleming <afleming@freescale.com>
2008-11-02 16:23:46 +01:00
Heiko Schocher
298e476c66 mgsuvd: remove unused defines in config file.
Signed-off-by: Heiko Schocher <hs@denx.de>
2008-11-02 16:22:20 +01:00
Wolfgang Denk
3cbd823116 Coding Style cleanup, update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-11-02 16:14:22 +01:00
Wolfgang Denk
3ec53148eb Merge branch 'master' of git://git.denx.de/u-boot-nand-flash 2008-11-01 16:18:43 +01:00
Wolfgang Denk
b24ef56587 Merge branch 'master' of git://git.denx.de/u-boot-sh 2008-11-01 16:13:12 +01:00
Wolfgang Denk
d1e990ce0f Merge branch 'master' of git://git.denx.de/u-boot-cfi-flash 2008-11-01 16:11:08 +01:00
Wolfgang Denk
41e7bbe009 Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx 2008-11-01 16:07:43 +01:00
Wolfgang Denk
17380cb04d Merge branch 'master' of git://git.denx.de/u-boot-fdt 2008-11-01 16:05:51 +01:00
Wolfgang Denk
4cc64742a8 Merge branch 'master' of git://git.denx.de/u-boot-blackfin 2008-11-01 15:59:35 +01:00
Alessandro Rubini
a47f957ab5 NAND: Allow NAND and OneNAND to coexist
This removes in nand.h code that is verbatim duplicated from bbm.h,
including directly bbm.h in nand.h. The previous state of affairs
prevented compiling code for a board hosting both NAND and OneNAND chips.

Reported-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2008-10-31 16:37:53 -05:00
Scott Wood
2f77c7f45b JFFS2: Eliminate compiler error when both NAND and OneNAND are enabled.
Reported-by: Alessandro Rubini <rubini-list@gnudd.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2008-10-31 13:51:12 -05:00
Jason Jin
c57fc28947 NAND: Add NAND support for MPC8536DS board
This patch defines 1M TLB&LAW size for NAND on MPC8536DS, assigns 0xffa00000
for CONFIG_SYS_NAND_BASE and adds other NAND supports in config file.
It also moves environment(CONFIG_ENV_ADDR) outside of u-boot image.

Singed-off-by: Jason Jin <Jason.Jin@freescale.com>
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-31 13:14:31 -05:00