Commit Graph

707 Commits

Author SHA1 Message Date
Madalin Bucur
9e998d5dc1 powerpc/mpc85xx: Fix compiling error with DM_GPIO
P4080DS compilation fails with DM_GPIO enabled:

drivers/gpio/gpio-uclass.c:355:5: error: redefinition of 'gpio_request'
 int gpio_request(unsigned gpio, const char *label)
     ^~~~~~~~~~~~
In file included from ./arch/powerpc/include/asm/arch/gpio.h:17:0,
                 from ./arch/powerpc/include/asm/gpio.h:1,
                 from drivers/gpio/gpio-uclass.c:16:
./arch/powerpc/include/asm/mpc85xx_gpio.h:68:19: note: previous definition of 'gpio_request' was here
 static inline int gpio_request(unsigned gpio, const char *label)
                   ^~~~~~~~~~~~

Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-03 12:14:27 +05:30
Simon Glass
cd93d625fd common: Drop linux/bitops.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Simon Glass
4d72caa5b9 common: Drop image.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Masahiro Yamada
057516308a dma-mapping: add <asm/dma-mapping.h> for all architectures
To avoid "asm/dma-mapping.h: No such file or directory" error,
we need something.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-20 15:09:54 +08:00
Simon Glass
6d1fdb1efb common: Move upmconfig() to ppc.h
This file is only used by PowerPC so move it to an arch-specific header
file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17 13:27:28 -05:00
Yangbo Lu
ac76dd0836 Add global variable sdhc_per_clk for arm/powerpc
The QorIQ eSDHC controller supports two reference clocks. They are
platform clock and periperhal clock. The global variable sdhc_clk
has already been used for platform clock.
This patch is to add another global variable sdhc_per_clk for
periperhal clock, which provides higher frequency and is required
to be used for SD UHS and eMMC HS200/HS400 speed modes.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-01-16 13:16:26 +08:00
Yangbo Lu
c2a8b4f879 powerpc/mpc85xx: drop eSDHC periperhal clock code
The below patch added eSDHC periperhal clock code initially.
2d9ca2c mmc: fsl_esdhc: Add peripheral clock support

The purpose was to fix up device tree properties "peripheral-frequency"
so that linux could get the periperhal clock by it.
However the implementation on both u-boot and linux was only
for a Freescale SDK release. The linux part implementation had never
been upstreamed. These code should not have been exist on u-boot
mainline.

Let's remove the powerpc part changes but keep the changes in
fsl_esdhc driver. The changes in fsl_esdhc driver could be utilized
to support SD UHS and eMMC HS200/HS400 speed modes for current
Layerscape ARM platforms.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-01-16 13:16:25 +08:00
Rasmus Villemoes
42a13a0b9f mpc83xx: set MPC83XX_GPIO_CTRLRS to 2 for MPC8309
The MPC8309 has two gpio controllers (which is already correctly
reflected in its struct immap definition).

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Mario Six <mario.six@gdsys.cc>
2020-01-08 08:14:20 +01:00
Rasmus Villemoes
375d817d9e mpc83xx: immap_83xx: add spi8xxx_t in immap for mpc8309
Allow drivers/spi/mpc8xxx_spi.c to be built for an mpc8309 target.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Mario Six <mario.six@gdsys.cc>
2020-01-08 08:14:14 +01:00
Yangbo Lu
1eaffca076 mpc83xx: remove unused clock.h
The clock.h was to define mxc_get_clock() providing clock value
to fsl_esdhc driver. Since fsl_esdhc driver is using global data
gd->arch.sdhc_clk directly now, we can remove this file.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-27 16:55:56 +08:00
Udit Agarwal
bef1845404 freescale/powerpc: Rename the config CONFIG_SECURE_BOOT name
Rename the CONFIG_SECURE_BOOT name to CONFIG_NXP_ESBC to avoid
conflicts with UEFI secure boot.

Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-08 16:32:08 +05:30
Hou Zhiqiang
c16dfd016a powerpc: mpc85xx: Move CONFIG_FSL_PCIE_DISABLE_ASPM to Kconfig
Use the Kconfig option to select the PCIe ASPM errata.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-20 10:43:55 +05:30
Mario Six
6fffab74cd powerpc: Simplify processor.h
Lots of stuff in processor.h was taken verbatim from the Linux kernel.
It was never synced, so most of it was removed or changed in the kernel
since it was imported.

Remove all the stuff that is unused in the current U-Boot sources;
should anybody feel the need to re-sync with the kernel, they can do it
later on.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21 07:52:34 +02:00
Mario Six
9fc148ebc4 mpc83xx: Add arch clock.h to make SDHC work
The fsl-esdhc driver can be used for the SDHC functionality on MPC83xx,
but it needs some additional definitions.

Add a clock.h file, so we can use the driver for MPC83xx.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21 07:52:33 +02:00
Mario Six
d17e5fdfea mpc83xx: Prepare usage of DM gpio driver
The MPC85xx GPIO driver was converted to handle a broader range of SoCs.

Prepare the MPC83xx code for usage of this driver.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21 07:52:33 +02:00
Mario Six
a06e665b47 powerpc: mpc83xx: Fix MPC8308 IMMR memory layout
The MPC8308 has two I2C controllers, but no PCI controller.

Fix the register map layout for this SoC.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21 07:52:33 +02:00
Mario Six
10590363b5 powerpc: Add LSDMR config values
The LSDMR_* macros are used to configure the system bus on MPC83xx.

A few of the possible LSDMR_* macros were never defined in the
respective include files. This renders the SDRAM support on the
MPC8349EMDS unusable, because it uses these undefined macros.

To make the SDRAM option work, introduce these macros into the proper
config file.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20 13:50:34 +02:00
Mario Six
8439e99ddb mpc83xx: Introduce ARCH_MPC837X
Replace CONFIG_MPC837x with a proper CONFIG_ARCH_MPC837X Kconfig option.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20 13:50:34 +02:00
Mario Six
61abced70f mpc83xx: Introduce ARCH_MPC836*
Replace CONFIG_MPC836* with proper CONFIG_ARCH_MPC836* Kconfig options.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20 13:50:34 +02:00
Mario Six
d5cfa4aa5d mpc83xx: Introduce ARCH_MPC834*
Replace CONFIG_MPC834* with proper CONFIG_ARCH_MPC834* Kconfig options.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20 13:50:34 +02:00
Mario Six
bd3b867eb9 mpc83xx: Introduce ARCH_MPC832*
Replace CONFIG_MPC832* with proper CONFIG_ARCH_MPC832* Kconfig options.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20 13:50:34 +02:00
Mario Six
9403fc41c7 mpc83xx: Introduce ARCH_MPC831*
Replace CONFIG_MPC833* with proper CONFIG_ARCH_MPC833* Kconfig options.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20 13:50:34 +02:00
Mario Six
4bc97a3b81 mpc83xx: Introduce ARCH_MPC830*
Replace CONFIG_MPC830* with proper CONFIG_ARCH_MPC830* Kconfig options.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20 13:50:34 +02:00
Heinrich Schuchardt
70eb82539b powerpc: enabled building with CONFIG_DM=y
Moving to the driver model requires CONFIG_DM to be enabled. Currently
several boards like kmeter1_defconfig produce a build error when CONFIG_DM
is enabled:

In file included from include/common.h:35,
                 from ./arch/powerpc/include/asm/fsl_lbc.h:10,
                 from include/mpc83xx.h:10,
                 from ./arch/powerpc/include/asm/ppc.h:27,
                 from ./arch/powerpc/include/asm/u-boot.h:18,
                 from include/dm/of.h:10,
                 from include/dm/ofnode.h:12,
                 from include/dm/device.h:13,
                 from include/linux/mtd/mtd.h:26,
                 from drivers/mtd/mtdconcat.c:25:
include/image.h: In function ‘image_check_target_arch’:
include/image.h:846:3: error: #error "please define IH_ARCH_DEFAULT in
                       your arch asm/u-boot.h"
 # error "please define IH_ARCH_DEFAULT in your arch asm/u-boot.h"
   ^~~~~
include/image.h:848:31: error: ‘IH_ARCH_DEFAULT’ undeclared (first use in
                        this function); did you mean ‘IH_ARCH_COUNT’?
  return image_check_arch(hdr, IH_ARCH_DEFAULT);

The error can be avoided by moving the definition of IH_ARCH_DEFAULT before

     #include <asm/ppc.h>

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-02 18:11:20 +05:30
Tom Rini
9450ab2ba8 Merge branch 'master' of git://git.denx.de/u-boot-spi
- Various MTD fixes from Boris
- Zap various unused / legacy paths.
- pxa3xx NAND update from Miquel

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-12-05 15:06:24 -05:00
Jagan Teki
35f9d9bdd0 spi: Zap CONFIG_HARD_SPI
In legacy CONFIG_HARD_SPI initalizing spi_init code, which
was removed during dm conversion cleanup.

So remove the dead instances of CONFIG_HARD_SPI, and related
code.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-11-27 21:06:53 +05:30
Simon Glass
b0edea3c27 spl: Add support for passing handoff info to U-Boot proper
There is some basic informaton that SPL normally wants to pass through to
U-Boot, such as the SDRAM size and bank information.

Mkae use of the new bloblist structure for this. Add a new 'handoff' blob
which is set up in SPL and passed to U-Boot proper. Also adda  test for
sandbox_spl that checks that this works correctly and a new 'sb' command
to show the information passed from SPL.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-26 08:25:37 -05:00
Bin Meng
db148f2a69 powerpc: t1040: Correct RCW EC2 settings
Per T1040RM (Rev. 1, 08/2015), there are 2 issues with the RCW EC2
settings.

- The value of FSL_CORENET_RCWSR13_EC2_FM1_GPIO is wrong and should
  be 0x04000000 (value of 1 in RCW bit [420:421])
- Value of 2/3 are reserved in RCW bit [420:421], hence there is no
  macro FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_MII.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Poonam Aggrwal <poonam.aggrwal@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-10-29 13:19:43 -07:00
Bin Meng
c00d0012f5 powerpc: t1040: Correct RCW MAC2_GMII_SEL value
Per T1040RM (Rev. 1, 08/2015), the value of
FSL_CORENET_RCWSR13_MAC2_GMII_SEL_ENET_PORT is wrong
and should be 0x00000080 (bit 440 in the RCW).

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Poonam Aggrwal <poonam.aggrwal@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-10-29 13:13:33 -07:00
Mario Six
d2166319df misc: Add MPC83xx serdes driver
Add a driver to configure the SerDes (Serializer/Deserializer) lanes on
the MPC83xx architecture.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-18 08:12:21 -06:00
Mario Six
19fbdca47b cpu: Add MPC83xx CPU driver
Add a CPU driver for the MPC83xx architecture.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-18 08:12:21 -06:00
Mario Six
07d538d281 clk: Add MPC83xx clock driver
Add a clock driver for the MPC83xx architecture.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-18 00:01:18 -06:00
Mario Six
08f5b0b23a powerpc: Add read*_*/write*_* macros
Define the read*_*/write*_* macros for the PowerPC platform to be able
to use the macros in wait_bit.h.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-18 00:01:18 -06:00
Masahiro Yamada
3747bdbb2b arch: types.h: factor out fixed width typedefs to int-ll64.h
All architectures have the same definition for s8/16/32/64
and u8/16/32/64.

Factor out the duplicated code into <asm-generic/int-ll64.h>.

BTW, Linux unified the kernel space definition into int-ll64.h
a few years ago as you see in Linux commit 0c79a8e29b5f
("asm/types.h: Remove include/asm-generic/int-l64.h").

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-09-10 20:48:16 -04:00
Alex Kiernan
d673668964 configs: Remove empty #ifdef/#ifndef blocks from configs
Remove empty #ifdef/#ifndef..#endif blocks where the configuration they
guarded has been completely removed.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-07-10 16:55:57 -04:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Christophe Leroy
b1d62424cb powerpc: mpc8xx: redistribute data in CPM dpram
Some malloc memory is needed at startup for DM model.
Lets reorganise the use of the CPM dpram.

The MPC866/885 dpram, we have 8kbytes dual port RAM, which is usable as:
IMMR + 0x2000..0x2800: BD/Data/Microcode
IMMR + 0x2800..0x2e00: BD/Data
IMMR + 0x2e00..0x3800: BD/Data/Microcode
IMMR + 0x3800..0x3a00: BD/Data
IMMR + 0x3a00..0x3c00: BD/Data/Microcode
IMMR + 0x3c00..0x4000: Parameters for the Peripheral Controllers

Lets reallocate all BDs in the 3800..3a00 area and give the full
2800..2e00 for dynamic RAM allocation including global data

That way, the microcode areas remain available if needed one day.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-04-06 16:30:37 -04:00
Christophe Leroy
18f8d4c60d powercp: mpc8xx: move commproc.h
include/commproc.h is dedicated to the 8xx, rename it cpm_8xx.h and
move it into arch/powerpc/include/asm

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-04-06 16:30:37 -04:00
Christophe Leroy
ee1e600c13 powerpc: mpc8xx: Change CONFIG_8xx to CONFIG_MPC8xx
CONFIG_8xx doesn't mean much outside of arch/powerpc/
This patch renames it CONFIG_MPC8xx just like CONFIG_MPC85xx etc ...
It also renames 8xx_immap.h to immap_8xx.h to be consistent with
other file names.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-04-06 16:30:37 -04:00
Christophe Leroy
0ebb5388b4 powerpc: mpc8xx: remove get_immr() argument
get_immr() is always called with 0 as an argument, so it is useless.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-04-06 16:30:37 -04:00
Christophe Leroy
14119901fd powerpc: mpc8xx: make get_immr() independent of CONFIG_8xx
SPRN_IMMR is defined regardless of the CPU. Therefore, there
is no point in enclosing get_immr() inside a #ifdef CONFIG_8xx

As it a static inline function, it will in any case only be
compiled in functons using it.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-04-06 16:30:37 -04:00
Christophe Leroy
fdef3895a0 powerpc: mpc8xx: get rid of the multiple PVR_ values
Avoid hardcoding the PVR values in C since they are defined
in processor.h

At the same time, remove those multiple PVR values for 8xx and
keep only one that we call PVR_8xx

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-04-06 16:30:37 -04:00
Michal Simek
71b7564479 ppc: Remove orphan xilinx_irq.h file
This file is completely unused and it should be removed as the part of
ppc405/ppc440 xilinx platform removal.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-16 14:54:14 -04:00
Zhao Qiang
990d06b0bc PowerPC: phy: enable all phylib drivers when use phylib and tsec enet
config_phylib_all_drivers.h should be included when CONFIG_PHYLIB and
CONFIG_TSEC_ENET are defined.

Fixes: 3146f0c017 ("Move PHYLIB to Kconfig")
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-02-09 08:35:59 -08:00
Derald D. Woods
405fc8305b Convert CONFIG_SYS_BOOT_GET_{CMDLINE, KBD} to Kconfig
This converts the following to Kconfig:
	CONFIG_SYS_BOOT_GET_CMDLINE
	CONFIG_SYS_BOOT_GET_KBD

Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
2018-01-30 12:52:57 -05:00
Tuomas Tynkkynen
8996975ff8 powerpc: Drop CONFIG_WALNUT and other related dead code
CONFIG_WALNUT was dropped in June 2017 in:
commit 98f705c9ce ("powerpc: remove 4xx support")

While at it, the related CONFIG_MACH_SPECIFIC and the have_of
and _machine variables are unused as well, so drop them too.

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-28 12:27:32 -05:00
Mario Six
3c21683480 gpio: mpc8xxx: Rename Kconfig option, structures, and functions
Rename the Kconfig option, structures (and their members), as well as
functions of the mpc85xx driver to include mpc8xxx to reflect the more
generic usage.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-01-28 09:36:28 -05:00
Ahmed Mansour
44262327aa drivers/misc: Share qbman init between archs
This patch adds changes necessary to move functionality present in
PowerPC folders with ARM architectures that have DPAA1 QBMan hardware

- Create new board/freescale/common/fsl_portals.c to house shared
  device tree fixups for DPAA1 devices with ARM and PowerPC cores
- Add new header file to top includes directory to allow files in
  both architectures to grab the function prototypes
- Port inhibit_portals() from PowerPC to ARM. This function is used in
  setup to disable interrupts on all QMan and BMan portals. It is
  needed because the interrupts are enabled by default for all portals
  including unused/uninitialised portals. When the kernel attempts to
  go to deep sleep the unused portals prevent it from doing so

Signed-off-by: Ahmed Mansour <ahmed.mansour@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-10 12:28:47 -08:00
Paul Burton
ae07d609e9 powerpc: Use asm-generic/io.h
Convert the powerpc architecture to make use of the new asm-generic/io.h
to provide address mapping functions. As powerpc can actually perform
non-identity mapping between physical & virtual addresses we can't
simply make use of the generic phys_to_virt() & virt_to_phys()
functions. However since map_physmem() already effectively implemented
the same thing as virt_to_phys() we can simply implement virt_to_phys()
instead of map_physmem() & use the generic map_physmem(). We also drop
the no-op unmap_physmem().

This has only been build-tested, feedback from architecture maintainers
is welcome.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Wolfgang Denk <wd@denx.de>
2017-10-02 21:52:23 -04:00
Tom Rini
deff9b1d2a powerpc: Rework interrupt_init_cpu()
The function interrupt_init_cpu() is given an int return type but does
not return anything but 0.  Rework this to be a void function.

Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Mario Six <mario.six@gdsys.cc>
2017-08-26 14:56:08 -04:00