Jon Loeliger
d9bf4858fc
Allow DTC path to be passed in.
...
Signed-off-by: Jon Loeliger <jdl@jdl.com>
2006-06-07 10:52:49 -05:00
Jon Loeliger
a941b83241
Merge branch 'mpc86xx'
2006-06-07 08:49:46 -05:00
Jon Loeliger
72ed528a94
Merge branch 'master' of http://www.denx.de/git/u-boot
2006-06-07 08:49:38 -05:00
Haiying Wang
c83ae9ea6d
Modify the IRQ of DUART2
2006-06-07 08:48:08 -05:00
Stefan Roese
4526c87eec
Update PCS440EP port to fit into one flash device (incl. environment)
...
Patch by Stefan Roese, 06 Jun 2006
2006-06-06 10:59:12 +02:00
Wolfgang Denk
2fd9eb509d
Minor cleanup
2006-06-02 17:04:21 +02:00
Stefan Roese
a4c8d1389f
Add support for PCS440EP board
...
Patch by Stefan Roese, 02 Jun 2006
2006-06-02 16:20:36 +02:00
Jon Loeliger
c934f655f9
Review cleanups.
...
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-05-31 14:01:32 -05:00
Jon Loeliger
cb5965fb95
White space cleanup.
...
Some 80-column cleanups.
Convert printf() to puts() where possible.
Use #include "spd_sdram.h" as needed.
Enhanced reset command usage message a bit.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-05-31 12:44:44 -05:00
Jon Loeliger
3d5c5be547
Removed unneeded local_bus_init() from 8641HPCN board.
...
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-05-31 11:39:34 -05:00
Jon Loeliger
4d3d729c16
Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
...
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-05-31 11:24:28 -05:00
Jon Loeliger
126aa70f10
Move mpc86xx PIXIS code to board directory
...
First cut at moving the PIXIS platform code out of
the 86xx cpu directory and into board/mpc8641hpcn
where it belongs.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-05-31 09:49:33 -05:00
Wolfgang Denk
b9b2480f4f
Correct GPIO setup (UART1/IRQ's) on yosemite & yellowstone
...
Patch by Stefan Roese, 29 May 2006
2006-05-30 17:45:30 +02:00
Wolfgang Denk
ba94a1bba3
* Update Intel IXP4xx support
...
- Add IXP4xx NPE ethernet MAC support
- Add support for Intel IXDPG425 board
- Add support for Prodrive PDNB3 board
- Add IRQ support
Patch by Stefan Roese, 23 May 2006
[This patch does not include cpu/ixp/npe/IxNpeMicrocode.c which still
sufferes from licensing issues. Blame Intel.]
2006-05-30 15:56:48 +02:00
Haiying Wang
ed45d6c930
Added pci@8000 block.
...
Updated ethernet interrupt mappings (moved up 48).
Cleaned up a few comments.
Signed-off-by: Jon Loeliger <jdl@jdl.com>
2006-05-26 10:13:04 -05:00
Jon Loeliger
586d1d5abd
Update 86xx address map and LAWBARs.
2006-05-19 13:54:02 -05:00
Jon Loeliger
f35ec68fb0
Enable 2nd CPU and I2C.
2006-05-19 13:54:02 -05:00
Jon Loeliger
9f37dc8cab
Merge branch 'mpc86xx'
2006-05-15 08:32:11 -05:00
Jon Loeliger
bf690dcb51
Update interrupt mapping.
2006-05-15 07:26:56 -05:00
Wolfgang Denk
8cba090c58
Add support for VirtLab2 board
...
(needed because of differences in the PCMCIA hardware).
2006-05-12 16:15:46 +02:00
Wolfgang Denk
977b50f868
Minor cleanup.
2006-05-10 17:43:20 +02:00
Jon Loeliger
846c2d4a0e
Merge branch 'mpc86xx'
2006-05-10 09:43:21 -05:00
Haiying Wang
6cfea33477
Remove unneeded INIT_RAM_LOCK cache twiddling.
...
Correctly tracks r29 as global data pointer now.
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2006-05-10 09:38:06 -05:00
Jon Loeliger
d4dd317b58
Remove unnecessary flash.c file.
2006-05-10 09:33:07 -05:00
Stefan Roese
d1dd22f92e
OMAP 5912/OSK: update EMIFS CS1 timings:
...
Problems have been seen in the linux kernel's smc91x network driver
due to improper bus timings. The latest 2.6 OMAP kernels currently
have a workaround, but this fix belongs in u-boot.
Patch by Kevin Hilman, 13 Oct 2005
2006-05-10 11:49:37 +02:00
Stefan Roese
77f633425b
Fix REG_MPU_LOAD_TIMER definition in multiple OMAP ports
...
Patch by Hiroki Kaminaga, 11 Mar 2006
2006-05-10 11:28:48 +02:00
Stefan Roese
6080a0eb63
Update omap5912osk board support
...
- Fix OMAP support that omap5912osk compiles in current source tree
- Update with code from "http://omap.spectrumdigital.com/osk5912 "
to fix problems with DDR initialization
- Fix timer setup
- Use CFI flash driver and support complete 32MB of onboard flash
- Add "print_cpuinfo()" and "checkboard()" functions to display
CPU (with frequency) and Board infos
Patch by Stefan Roese, 10 May 2006
2006-05-10 10:55:16 +02:00
Jon Loeliger
a67255363a
Merge branch 'mpc86xx'
2006-05-09 08:33:11 -05:00
Jon Loeliger
18b6c8cd8a
Get MPC8641HPCN flash images working.
...
Enable the CFI driver.
Remove bogus LAWBAR7 cruft.
Use correct TEXT_BASE, Fixup load script.
Enable SPD EEPROM during DDR setup.
Use generic RFC 1918 IP addresses by default.
2006-05-09 08:23:49 -05:00
Wolfgang Denk
1cfefe8cb6
Merge with /home/m8/git/u-boot
2006-05-09 13:46:55 +02:00
Marian Balakowicz
78b123cd69
Add M5271EVB board support.
2006-05-09 11:54:44 +02:00
Marian Balakowicz
483a0cf804
Fixes for gcc 3.4 based m68k toolchain,
...
based on patch by Jate Sujjavanich.
2006-05-09 11:28:36 +02:00
Wolfgang Denk
0cf7d8aa0b
Merge with git://git.kernel.org/pub/scm/boot/u-boot/galak/u-boot.git#mpc8349emds
2006-05-03 17:52:20 +02:00
Heiko Schocher
cb0fdf3cfa
VoiceBlue update: use new MTD flash partitioning methods, use more
...
reasonable TEXT_BASE, update default environment and enable keyed
autoboot.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2006-05-03 08:34:03 +02:00
Wolfgang Denk
610cf3676e
Coding Style cleanup
2006-05-03 01:24:04 +02:00
Marian Balakowicz
7a635e004e
Add support for Freescale M5271: Merge with /work/u-boot.mcf5271
2006-04-27 19:12:19 +02:00
Jon Loeliger
5c9efb36a6
Cleanup whitespaces and style issues.
...
Removed //-style comments.
Use 80-column lines.
Remove trailing whitespace.
Remove dead code and debug cruft.
2006-04-27 10:15:16 -05:00
Jon Loeliger
debb7354d1
Initial support for MPC8641 HPCN board.
2006-04-26 17:58:56 -05:00
Heiko Schocher
0e0ef590b2
Add Altera Nios-II boards EP1C20, EP1S10 and EP1S40
...
Patch from Scott McNutt, 11 Aug 2005
2006-04-26 08:13:18 +02:00
Markus Klotzbuecher
7c93b2443c
NAND support for zylonite board + some minor cleanup.
2006-04-25 16:48:48 +02:00
Markus Klotzbuecher
71ae411a63
delta board: support for magic key detection and handling.
2006-04-25 10:03:01 +02:00
dzu@denx.de
6ca24c64a5
Add support for BC3450 board
...
Signed-off-by: dzu@denx.de <dzu@denx.de>
2006-04-21 18:30:47 +02:00
Kumar Gala
8fe9bf61ef
Merged MPC8349ADS and MPC8349EMDS ports into MPC8349EMDS port:
...
- Removed MPC8349ADS port
- Added PCI support to MPC8349ADS
- reworked memory map to allow mapping of all regions with BATs
Patch by Kumar Gala 20 Apr 2006
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-04-20 13:45:32 -05:00
Heiko Schocher
a83531bb62
* Update PK1C20 board for Nios-II 5.0
...
Patch from Scott McNutt, 11 Aug 2005
-Update base addresses for standard configuration
-Eliminate use of CACHE_BYPASS in board code
2006-04-20 12:57:43 +02:00
Heiko Schocher
9acb626fc1
Add MCF5282 support (without preloader)
...
relocate ichache_State to ram
u-boot can run from internal flash
Add EB+MCF-EV123 board support.
Add m68k Boards to MAKEALL
Patch from Jens Scharsig, 08 Aug 2005
2006-04-20 08:42:42 +02:00
dzu@denx.de
56a4a63c10
Added missing nand.c for NC650 board
...
Signed-off-by: dzu@denx.de <dzu@eddie.localdomain>
2006-04-19 15:27:11 +02:00
dzu@denx.de
a367d42640
Update for NC650 board. Add NC650 based CP850 configuration.
...
Signed-off-by: dzu@denx.de <dzu@denx.de>
2006-04-19 11:52:46 +02:00
Wolfgang Denk
cf48eb9abd
Some code cleanup
2006-04-16 10:51:58 +02:00
Wolfgang Denk
807522fc9a
Merge with /home/hs/U-Boot/u-boot-dev
2006-04-16 10:27:31 +02:00
Wolfgang Denk
b28a31ca02
Merge with /home/m8/git/u-boot
2006-04-12 12:26:32 +02:00
Heiko Schocher
ad88297e2f
* Fix dbau1x00 Board
...
- Fix dbau1x00 boards broken by dbau1550 patch
PLL:s were not set for boards other than 1550.
Flash CFI caused card to hang due to undefined CFG_FLASH_BANKS_LIST.
Default boot is now bootp for cards other than 1550.
Patch by Thomas Lange Aug 10 2005
2006-04-11 14:53:29 +02:00
Marian Balakowicz
6db3970811
Fix JFFS2 support for legacy NAND driver.
...
Some more NAND cleanup and small fixes.
2006-04-08 19:08:06 +02:00
Wolfgang Denk
3a5e21881a
MCC200 Board: fix flash unprotection code for flash > 32 MB.
2006-04-06 15:03:42 +02:00
Wolfgang Denk
9bc97a3d91
Fix Lite500B support: Merge with /home/raj/git/u-boot.l5200b_pci
2006-04-06 10:42:23 +02:00
Wolfgang Denk
534ff676a9
* Add support for ymodem protocol download
...
Patch by Stefano Babic, 29 Mar 2006
* Memory Map Update for Delta board: U-Boot is at 0x80000000-0x84000000
Merge with /home/mk/8-benq/u-boot
2006-04-01 15:52:46 +02:00
Wolfgang Denk
d87080b721
GCC-4.x fixes: clean up global data pointer initialization for all boards.
2006-03-31 18:32:53 +02:00
Markus Klotzbuecher
9e7b5ce61b
delta board: one more DA9030 fix.
2006-03-30 17:00:39 +02:00
Markus Klotzbuecher
eeaab720f6
Change delta board memory map to start at 0x80000000.
2006-03-29 17:59:20 +02:00
Markus Klotzbuecher
89f2dfa4c3
delta board: minor update to DA9030 code.
2006-03-29 17:49:27 +02:00
Rafal Jaworowski
b66a938342
Set SDelay register in the DDR controller for the MPC5200B chip.
2006-03-29 13:17:09 +02:00
Markus Klotzbuecher
c855ef6768
delta board: fix DA9030 reset procedure.
2006-03-27 16:01:03 +02:00
Markus Klotzbuecher
2770bcb21c
Merge with http://www.denx.de/git/u-boot.git
2006-03-24 15:43:16 +01:00
Markus Klotzbuecher
ba70d6a417
delta board: DA9030 initialization and i2c support. Some minor changes to
...
make the pxa i2c driver work with the monahans cpu.
2006-03-24 12:23:27 +01:00
Markus Klotzbuecher
552fc624f2
Cleanup of the monahans cpu and delta board port.
2006-03-20 20:19:37 +01:00
Wolfgang Denk
0a112d8696
Merge with port of MPC8349EMDS board
2006-03-17 17:41:56 +01:00
Wolfgang Denk
09e4b0c5d3
Add support for Lite5200B board.
...
Patch by Patch by Jose Maria (Txema) Lopez, 16 Jan 2006
2006-03-17 11:42:53 +01:00
Rafal Jaworowski
dc9e499c62
Support for DDR with 32-data path. Addotional notes on injecting
...
multiple-bit errors.
2006-03-16 17:46:46 +01:00
Marian Balakowicz
d326f4a242
Add command for handling DDR ECC registers on MPC8349EE MDS board.
2006-03-16 15:19:35 +01:00
Marian Balakowicz
991425fe05
Add initial support for MPC8349E MDS board.
2006-03-14 16:24:38 +01:00
Wolfgang Denk
ff7fefe679
Apply SoC concept to arm926ejs CPUs, i.e. move the SoC specific timer and
...
cpu_reset code from cpu/$(CPU) into the new cpu/$(CPU)/$(SOC) directories
Patch by Andreas Engel, 13 Mar 2006
2006-03-13 12:37:35 +01:00
Wolfgang Denk
84c960ce6d
Add support for EmbeddedPlanet EP88x boards
...
Patch by Yuli Barcohen, 13 Jul 2005
2006-03-12 23:17:31 +01:00
Wolfgang Denk
763b5f34c3
Remove board specific configuration includes from the common xilinx
...
ethernet and iic adapter code.
Patch by Michael Libeskind, 12 Jul 2005
2006-03-12 23:13:27 +01:00
Wolfgang Denk
47705af5da
Merge with git://git.kernel.org/pub/scm/boot/u-boot/u-boot.git#mpc8349ads
2006-03-12 21:49:19 +01:00
Wolfgang Denk
8e7b703a62
Coding Style cleanup
2006-03-12 02:55:22 +01:00
Wolfgang Denk
6cb142fa3b
Add missing Blackfin files.
2006-03-12 02:12:27 +01:00
Wolfgang Denk
8ff0208d31
Switch MPC86xADS and MPC885ADS boards to use cpuclk environment
...
variable to set clock
Patch by Yuli Barcohen, 05 Jun 2005
2006-03-12 01:55:43 +01:00
Wolfgang Denk
aba9f1af60
Memory configuration changes for ZPC.1900 board
...
- Fix SDRAM timing on both local bus and 60x bus
- Add support for second flash bank (SIMM)
- Change boot flash base
Patch by Yuli Barcohen, 05 Jun 2005
2006-03-12 01:45:44 +01:00
Wolfgang Denk
5797b821dc
Add support for Adder boards with 16MB SDRAM;
...
add support for second FEC on Adder87x board.
Patch by Yuli Barcohen, 05 Jun 2005
2006-03-12 01:43:03 +01:00
Wolfgang Denk
84ef51a632
Fix cleanup for netstart board.
...
Remove build results from repository
2006-03-12 00:04:20 +01:00
Wolfgang Denk
d2ed2f661b
More GCC 4.x woes
2006-03-11 23:07:09 +01:00
Wolfgang Denk
8de7ed3abe
More GCC 4.x code cleanup
2006-03-11 22:56:07 +01:00
Wolfgang Denk
d52fb7e3d1
Some code cleanup for GCC 4.x
2006-03-11 22:53:33 +01:00
Wolfgang Denk
951a954b77
Merge with /home/wd/git/u-boot/master
...
Code cleanup.
2006-03-06 23:18:48 +01:00
Markus Klotzbcher
43638c674a
Cleanup of NAND support of delta board using the Monahans Data Flash
...
Controller.
2006-03-06 15:04:25 +01:00
Markus Klotzbcher
f9e029184b
NAND finally working. Two bugs fixed:
...
* For READ_STATUS and READID commands always 8 bytes need to be read from
NDDB. Otherwise they stay there and get send to flash as the first data
word when writing.
* In nand_base.c the oob variable is not reset so this->oob_buf is
overwritten what eventually screws up the bad block descriptor table.
2006-03-06 13:45:42 +01:00
Wolfgang Denk
bfc81252c0
Minor code cleanup
2006-03-06 13:03:37 +01:00
Wolfgang Denk
4e3ccd2692
Merge the new NAND code (testing-NAND brach); see doc/README.nand
...
Rewrite of NAND code based on what is in 2.6.12 Linux kernel
Patch by Ladislav Michl, 29 Jun 2005
[Merge with /home/tur/nand/u-boot]
2006-03-06 11:25:22 +01:00
Bartlomiej Sieka
addb2e1650
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
...
code and in SoC code). Boards using the old way have CFG_NAND_LEGACY and
BOARDLIBS = drivers/nand_legacy/libnand_legacy.a added. Build breakage for
NETTA.ERR and NETTA_ISDN - will go away when the new NAND support is
implemented for these boards.
2006-03-05 18:57:33 +01:00
Markus Klotzbcher
bf7cac033b
Lots of new stuff:
...
* Debug message can be turned on and off.
* Waiting for events now times out.
* Implemented RESET command.
* Added appropriate nand_bbt_descriptor and nand_oobinfo.
Remaining Problems:
* Read Status still behaves weird an returns invalid stuff sometimes.
* ECC Placement does not respect our scheme in nand_oobinfo.
2006-03-04 18:35:51 +01:00
Stefan Roese
f1ee982506
Add lowboot target to mcc200 board
...
Patch by Stefan Roese, 4 Mar 2006
2006-03-04 14:57:03 +01:00
Markus Klotzbcher
f8785e96c9
Erasing works too now. The CS don't care causes problem with READSTATUS,
...
don't ask me why. There are still bugs in the bad block logic.
2006-03-03 20:13:43 +01:00
Markus Klotzbcher
24e1217be3
Write operation is working. Turned out that the READSTATUS hack was wrong
...
after all.
2006-03-03 16:09:28 +01:00
Markus Klotzbcher
9187a35b6c
Writing is working, but there's still a bug that causes the data written to
...
start at an offset of 4 bytes from the start of the page.
2006-03-03 15:37:01 +01:00
Markus Klotzbcher
19fdeff433
Implemented writing, not working yet.
2006-03-03 12:11:11 +01:00
Markus Klotzbcher
e2053f9c7a
Moved the waiting loop for "Read Data Request" RDDREQ into the
...
delta_cmdfunc function, because this bit is only set once after a command
is sent and this allows read functions to be called multiple times.
2006-03-02 14:02:36 +01:00
Markus Klotzbcher
bb1ff049fb
Read bug fixed. Now "nand bad" list the badblocks correctly (i hope, since
...
there are 0)
2006-03-02 12:10:01 +01:00
Markus Klotzbcher
481911c78c
Further NAND stuff implemented. Basic read commands seem to work.
2006-03-01 23:33:27 +01:00
Stefan Roese
f18e874ad5
Fix problem with flash_get_size() from CFI driver update
...
Patch by Stefan Roese, 1 Mar 2006
2006-03-01 17:00:49 +01:00
Markus Klotzbcher
00c35bd214
Added GPIO initialization of DF signal. Still not working.
2006-02-28 22:51:01 +01:00
Markus Klotzbcher
6949328d7d
First steps implementing NAND support. Not working, fails to read ID.
2006-02-28 18:05:25 +01:00
Stefan Roese
58ad497833
Convert mcc200 to use common CFI flash driver
...
Patch by Stefan Roese, 28 Feb 2006
2006-02-28 15:33:28 +01:00
Stefan Roese
79b4cda076
Major CFI-FLASH driver update:
...
* Add env-variable "unlock" to handle initial state of sectors
(locked/unlocked).
Only the U-Boot image and it's environment is protected,
all other sectors are unprotected (unlocked) if flash
hardware protection is used (CFG_FLASH_PROTECTION) and
the environment variable "unlock" is set to "yes".
Patch by Stefan Roese, 28 Feb 2006
* Update drivers/cfi_flash.c:
- find_sector() called in both versions of flash_write_cfiword()
Patch by Peter Pearse, 27th Feb 2006
* CFI support for a x8/x16 AMD/Spansion flash configured in x8 mode
Patch by Jose Maria Lopez, 16 Jan 2006
* Add support for AMD/Spansion Flashes in flash_write_cfibuffer
Patch by Alex Bastos and Thomas Schaefer, 2005-08-29
* Changes/fixes for drivers/cfi_flash.c:
We *should* check if there are any error bits if the previous call
returned ERR_OK (Otherwise we will have output an error message in
flash_status_check() already.) The original code would only check for
error bits if flash_status_check() returns ERR_TIMEOUT.
Patch by Marcus Hall, 23 Aug 2005
* Changes/fixes for drivers/cfi_flash.c:
- Add CFG_FLASH_PROTECT_CLEAR on drivers/cfi_flash.c
- Prohibit buffer write when buffer_size is 1 on drivers/cfi_flash.c
Patch by Sangmoon Kim, 19 Aug 2005
* Fixes for drivers/cfi_flash.c:
- Fix wrong timeout value usage in flash_status_check()
- Round write_tout up when converting to msec in flash_get_size()
- Remove clearing flash status at the end of flash_write_cfibuffer()
which sets Intel 28F640J3 flash back to command mode on CSB472
Patch by Tolunay Orkun, 02 July 2005
2006-02-28 15:29:58 +01:00
Markus Klotzbcher
0377dca227
Merge /home/tur/nand/u-boot/
...
This is a first version of the testing-NAND branch merged back to main.
2006-02-24 14:16:31 +01:00
Markus Klotzbcher
7d4d1ce48c
Merge branch 'master' of http://www.denx.de/git/u-boot
2006-02-24 11:34:34 +01:00
Bartlomiej Sieka
038ccac511
Merge with /home/wd/git/u-boot/testing-NAND/ to add new NAND handling.
2006-02-24 09:37:22 +01:00
Wolfgang Denk
c81eb1f5f5
Cleanup MCC200 board.
2006-02-24 01:42:40 +01:00
Markus Klotzbcher
599f52253a
SDRAM now working.
2006-02-22 17:48:43 +01:00
Markus Klotzbcher
ff3c2a9478
SDRAM now working for delta board, but there are still aliasing problems,
...
we only see 64MB.
2006-02-22 14:05:44 +01:00
Wolfgang Denk
86ea5f93d7
Initial port to MCC200 board (work in progress)
...
Minimally modified patch by Bluetechnix, Vienna
2006-02-22 00:43:16 +01:00
Markus Klotzbcher
48b6242aa1
SDRAM seems to be working on delta board, though u-boot doesn't start yet.
2006-02-22 00:06:01 +01:00
Markus Klotzbcher
4f7a0e3671
New board directory and config for the benq delta board (copied from
...
zylonite). Minor pxa-regs.h update.
2006-02-20 16:37:37 +01:00
Markus Klotzbcher
b3c36e6b94
basic u-boot is working, boots into the command shell.
2006-02-09 13:19:25 +01:00
Markus Klotzbcher
9d803d8c0b
Changes:
...
* lots of bugfixes in the assembler code
* reverted hardware.h back to original
* enabled hardware DRAM calibration
* GCC-4 fix: modified GLOBAL_DATA_POINTER macro
2006-02-08 18:56:28 +01:00
Stefan Roese
79830d591a
Convert CPCI750 to use common CFI flash driver
...
Patch by Reinhard Arlt, 8 Feb 2006
2006-02-08 15:54:15 +01:00
Markus Klotzbcher
af646e865f
Forgot to add files to zylonite branch.
2006-02-07 20:48:45 +01:00
Stefan Roese
48a05a5188
Various changes to esd HH405 board specific files
...
Patch by Matthias Fuchs, 07 Feb 2006
2006-02-07 16:51:04 +01:00
Zachary P. Landau
3a108ed868
Add support for r5200 board
2006-01-26 17:37:59 -05:00
Stefan Roese
18c5e64c5b
Fix various compiler warnings on ppc4xx builds (ELDK 4.0)
...
Patch by Stefan Roese, 18 Jan 2006
2006-01-18 20:06:44 +01:00
Stefan Roese
a7b9fb9110
Add VGA support (CT69000) to CPCI750 board.
...
Insert missing __le32_to_cpu() for filesize in ext2fs_read_file().
Patch by Reinhard Arlt, 30 Dec 2005
2006-01-18 20:05:34 +01:00
Stefan Roese
2076d0a15f
PMC405 and CPCI405: Moved configuration of pci resources into config file.
...
PMC405 and CPCI2DP: Added firmware download and booting via pci.
Patch by Matthias Fuchs, 20 Dec 2005
2006-01-18 20:03:15 +01:00
Wolfgang Denk
c4b465f63e
Fix 28F256J3A support on PM520 board
...
(without bank-switching only 32 MB can be accessed)
2006-01-13 17:00:56 +01:00
Kumar Gala
86902b8e36
Added PCI support for MPC8349ADS board
...
Patch by Kumar Gala 11 Jan 2006
2006-01-12 19:51:38 -06:00
Wolfgang Denk
c7428d49ac
Add support for 28F256J3A flah (=> 64 MB) on PM520 board
2005-12-29 15:12:09 +01:00
Wolfgang Denk
27e166b875
Fix compiler problem with at91rm9200dk board.
...
Patch by Eugen Bigz, 19 Dec 2005
2005-12-19 13:02:45 +01:00
Stefan Roese
81a3170b15
Changes to Yellowstone & Yosemite 440EP/GR eval boards:
...
- Changed GPIO setup to enable another address line in order to
address 64M of FLASH.
- Added function sdram_tr1_set to auto calculate the tr1 value for
the DDR.
Patch by Steven Blakeslee, 12 Dec 2005
2005-12-15 09:43:12 +01:00
Wolfgang Denk
7481266e4e
2005-12-12 16:06:05 +01:00
Wolfgang Denk
f013dacf0a
Code cleanup, especially MIPS for GCC 4.x
2005-12-04 00:40:34 +01:00
Stefan Roese
d96f41e016
Add support for TQM8541/8555 boards, TQM85xx support reworked:
...
- Support for TQM8541/8555 boards added.
- Complete rework of TQM8540/8560 support.
- Common TQM85xx code now supports all current TQM85xx platforms
(TQM8540/8541/8555/8560).
- DDR SDRAM size detection added.
- CAS latency default values can be overwritten by setting "serial#"
to e.g. "ABC0001 casl=25" -> CAS latency 2.5 will be used.
If problems are detected with this non default CAS latency,
the defualt values will be used instead.
- FLASH size detection added.
- Moved FCC ethernet driver initialization behind TSEC driver init
-> TSEC is first device.
Patch by Stefan Roese, 30 Nov 2005
2005-11-30 13:06:40 +01:00
Stefan Roese
6e7fb6eaa5
Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board.
...
Patch by John Otken, 23 Nov 2005
2005-11-29 18:18:21 +01:00
Stefan Roese
1178a412d2
Minor AMCC 4xx board cleanups
...
Patch by Stefan Roese, 27 Nov 2005
2005-11-29 18:17:41 +01:00
Stefan Roese
3d9569b232
Changed PPC44x startup message (cpu info, speed...) to common style:
...
On PPC44x platforms, the startup message generated in "cpu.c" only
comprised the ppc type and revision but not additional informations
like speed etc. Those speed infos where printed in the board specific
code. This new implementation now prints all CPU infos in the common
cpu specific code. No board specific code is needed anymore and
therefore removed from all current 44x implementations.
Patch by Stefan Roese, 27 Nov 2005
2005-11-27 19:36:26 +01:00
Stefan Roese
5568e613ee
Add support for Prodrive P3P440 board:
...
- Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c
- CFG_FLASH_QUIET_TEST added to use the common CFI driver
for bank autodetection
Patch by Stefan Roese, 22 Nov 2005
2005-11-22 13:20:42 +01:00
Wolfgang Denk
fe126d8b34
Change all '$(...)' variable references into '${...}'
...
which makes the environment compatible with the hush shell.
WARNING: Support for the old '$(...)' syntax will be
discontinued in a later version.
2005-11-20 21:40:11 +01:00
Rafal Jaworowski
5a164c8ca9
Minor changes to init flags in TQM834x PCI.
2005-11-17 00:26:18 +01:00
Stefan Roese
c7911c7e8f
Merge with /server/home/stefan/git/u-boot/bamboo-sdram
2005-11-15 16:23:41 +01:00
Stefan Roese
fd49bf0214
Fix Bamboo DDR SDRAM initialization (problem with onboard SDRAM)
...
Patch by Stefan Roese, 15 Nov 2005
2005-11-15 16:04:58 +01:00
Stefan Roese
feaedfcf84
New PPC 405EP board added: CMS700
...
Added CONFIG_NET_MULTI for VOM405 board.
Added reset_phy() for VOM405 board.
Patch by Matthias Fuchs, 09 Nov 2005
2005-11-15 10:35:59 +01:00
Stefan Roese
ea339205a9
Updated PCI mapping for esd CPCI2DP board.
...
Add support for error LED.
Patch by Matthias Fuchs, 07 Nov 2005
2005-11-08 09:00:09 +01:00
Stefan Roese
f190c11b1f
Adjust bd->bi_flashstart on Yellowstone & Yosemite to correct size
...
Patch by Stefan Roese, 05 Nov 2005
2005-11-05 15:50:16 +01:00
Stefan Roese
ef04a0aa26
Additional fix for external IRQ config on Yellowstone & Yosemite
...
Patch by Stefan Roese, 03 Nov 2005
2005-11-03 08:31:33 +01:00
Stefan Roese
57275b69c6
Add support for Ocotea pass 3 with 440GX Rev. F
...
Patch by Stefan Roese, 01 Nov 2005
2005-11-01 10:08:03 +01:00
Stefan Roese
d9f2f5008c
Merge with /git/u-boot.git
2005-11-01 10:02:21 +01:00
Wolfgang Denk
5d4ee51061
Merge with /home/m8/git/u-boot
2005-10-29 23:45:04 +02:00
Marian Balakowicz
63ff004c4f
Add support for multiple PHYs.
2005-10-28 22:30:33 +02:00
Marian Balakowicz
170d5e6d4c
Fix conflicting types (flash_write()) in trab auto_update.c
2005-10-28 15:29:43 +02:00
Stefan Roese
e190290ba4
Fix external IRQ configuration on Yellowstone & Yosemite
...
The multiplexed signals Ext IRQ0...3 have to be configured as IRQ,
because they default to GPIOx (440EP/GR).
Patch by Stefan Roese, 28 Oct 2005
2005-10-28 12:21:06 +02:00
Wolfgang Denk
7b5cac0e19
Merge with /home/wd/git/u-boot/master
2005-10-21 22:41:25 +02:00
Stefan Roese
a547775bac
Fix conflicting types (flash_write()) in esd auto_update.c
...
Patch by Stefan Roese, 20 Oct 2005
2005-10-20 16:39:16 +02:00
Rafal Jaworowski
6902df56a0
Add PCI support for the TQM834x board.
2005-10-17 02:39:53 +02:00
Wolfgang Denk
84bd92bdda
Merge with /home/m8/git/u-boot
2005-10-15 18:23:43 +02:00