brain-hackers_pepepper-mirror/u-boot-brain
1
0
Fork 0
mirror of https://github.com/brain-hackers/u-boot-brain synced 2024-08-06 10:13:44 +09:00
Code Issues Projects Releases Wiki Activity
2,152 Commits 45 Branches 255 Tags 213 MiB
958de0e22e
Commit Graph

1166 Commits

Author SHA1 Message Date
Grant Likely
eb867a7623 [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers 
Block device read/write is anonymous data; there is no need to use a
typed pointer.  void * is fine.  Also add a hook for block_read functions

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
 2007-02-20 09:05:45 +01:00
Grant Likely
53758fa20e [PATCH 8_9] Add block_write hook to block_dev_desc_t 
Preparation for future patches which support block device writing

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
 2007-02-20 09:05:38 +01:00
Grant Likely
c95c4280d7 [PATCH 3_9] Move buffer print code from md command to common function 
Printing a buffer is a darn useful thing.  Move the buffer print code
into print_buffer() in lib_generic/

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
 2007-02-20 09:05:00 +01:00
Grant Likely
735dd97b1b [PATCH 1_4] Merge common get_dev() routines for block devices 
Each of the filesystem drivers duplicate the get_dev routine.  This change
merges them into a single function in part.c

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
 2007-02-20 09:04:34 +01:00
Stefan Roese
4be23a12f2 [PATCH] Update Sequoia EBC configuration (NOR FLASH) 
As spotted by Matthias Fuchs, the READY input should not be
enabled for the NOR FLASH on the Sequoia board.

Signed-off-by: Stefan Roese <sr@denx.de>
 2007-02-19 08:23:15 +01:00
Wolfgang Denk
bc2b9c3383 Merge with /home/tur/git/u-boot#motionpro 2007-02-16 23:44:55 +01:00
Bartlomiej Sieka
53d4a4983f [Motion-PRO] Preliminary support for the Motion-PRO board. 2007-02-09 10:45:42 +01:00
Stefan Roese
5a753f98c6 [PATCH] Update some AMCC 4xx board config files (set initrd_high) 
Some boards that can have more than 768MBytes of SDRAM need to
set "initrd_high", so that the initrd can be accessed by the
Linux kernel.

Signed-off-by: Stefan Roese <sr@denx.de>
 2007-02-07 16:51:08 +01:00
Stefan Roese
23744d6b5b [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file 
When PCI PNP is enabled the pci pnp configuration routine is called
which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some
problems with some PCI cards. For now disable the PCI PNP configuration.

Signed-off-by: Stefan Roese <sr@denx.de>
 2007-02-01 13:22:41 +01:00
Stefan Roese
2902fadade [PATCH] Update 440EPx/440GRx cpu detection 
Signed-off-by: Stefan Roese <sr@denx.de>
 2007-01-31 16:56:10 +01:00
Stefan Roese
8b7d1f0ab7 [PATCH] Add support for esd mecp5200 board 
Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
 2007-01-31 16:37:34 +01:00
Stefan Roese
71a4e5fda8 [PATCH] Remove unneccessary yellowstone board config file 
Signed-off-by: Stefan Roese <sr@denx.de>
 2007-01-31 12:38:50 +01:00
Wolfgang Denk
c105f4c660 Merge with /home/sr/git/u-boot/denx-merge-sr 2007-01-30 17:32:15 +01:00
Stefan Roese
e802594b6f [PATCH] Update Sequoia (440EPx) config file 
The config file now handles the 2nd target, the Rainier (440GRx)
evaluation board better. Additionally the PPC input clock was
adjusted to match the correct value of 33.0 MHz.

Signed-off-by: Stefan Roese <sr@denx.de>
 2007-01-30 17:06:10 +01:00
Stefan Roese
700200c67e [PATCH] Merge Yosemite & Yellowstone board ports 
Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
share one config file and all board specific files. This way we
don't have to maintain two different sets of files for nearly
identical boards.

Signed-off-by: Stefan Roese <sr@denx.de>
 2007-01-30 17:04:19 +01:00
Stefan Roese
1bbf5eae32 [PATCH] Update Prodrive SCPU (PDNB3 variant) board 
SCPU doesn't use redundant environment in flash.

Signed-off-by: Stefan Roese <sr@denx.de>
 2007-01-30 15:01:49 +01:00
Wolfgang Denk
d526de33d8 Merge with /home/sr/git/u-boot/denx-merge-sr 2007-01-30 14:38:21 +01:00
Stefan Roese
6304430ed6 [PATCH] alpr: Update alpr board config file 
Signed-off-by: Stefan Roese <sr@denx.de>
 2007-01-30 12:51:07 +01:00
Gary Jennejohn
6bd2447ee4 Add port for the lpc2292sodimm evaluation board from EmbeddedArtists 2007-01-24 12:16:56 +01:00
Wolfgang Denk
b78bb469f5 Merge with /home/tur/proj/idmr/u-boot 2007-01-24 10:26:47 +01:00
Bartlomiej Sieka
2daf046ba6 [iDMR] Add MTD and JFFS2 support, also add default partition definition. 2007-01-23 17:22:06 +01:00
Bartlomiej Sieka
0ed47bb119 [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g., 
"mii device" results in "Unexpected exception"). Fixing this properly
requires some clean-up in the FEC drivers infrastructure for ColdFire, so
this commit disables MII commads for now.
 2007-01-23 14:11:22 +01:00
Bartlomiej Sieka
363d1d8f9c [ColdFire MCF5271 family] Add CPU detection based on the value of Chip 
Identification Register (CIR).
 2007-01-23 13:25:22 +01:00
Wolfgang Denk
2ed5594649 Merge with /home/hs/SC3/u-boot-dev 2007-01-19 22:56:23 +01:00
Heiko Schocher
f539b7ba7d [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT. 
Signed-off-by: Heiko Schocher <hs@denx.de>
 2007-01-19 19:57:10 +01:00
Heiko Schocher
d0b6e14087 [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver 
if you must swap the bytes between reading/writing.
             (Needed for the SC3 board)

Signed-off-by: Heiko Schocher <hs@denx.de>
 2007-01-19 18:05:26 +01:00
Wolfgang Denk
15e5025a73 Merge with /home/hs/SC3/u-boot-dev 2007-01-19 12:06:32 +01:00
Stefan Roese
9d8d5a5bfb [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board 
Signed-off-by: Stefan Roese <sr@denx.de>
 2007-01-18 16:05:47 +01:00
Stefan Roese
0057d758e3 [PATCH] Update Prodrive P3Mx support 
Signed-off-by: Stefan Roese <sr@denx.de>
 2007-01-18 11:54:52 +01:00
Stefan Roese
34167a36c2 [PATCH] Add missing Taishan config file 
Signed-off-by: Stefan Roese <sr@denx.de>
 2007-01-18 11:48:10 +01:00
Heiko Schocher
cb4820725e [PATCH] Fix: Compilerwarnings for SC3 board. 
The EBC Configuration Register is now by CFG_EBC_CFG definable
             Added JFFS2 support for the SC3 board.

Signed-off-by: Heiko Schocher <hs@denx.de>
 2007-01-18 11:28:51 +01:00
Wolfgang Denk
6d3e010723 Raname solidcard3 into sc3; add redundant env for sc3 2007-01-16 18:30:50 +01:00
Wolfgang Denk
1bbbbdd20f Update default environment for Solidcard3 2007-01-16 12:46:35 +01:00
Wolfgang Denk
f11033e739 Merge with /home/hs/SC3/u-boot 
Some code cleanup.
 2007-01-15 13:41:04 +01:00
Wolfgang Denk
ddd4123336 Merge with /home/hs/MAN/u-boot-dev 2007-01-15 12:56:52 +01:00
Stefan Roese
44cd6de2e1 Merge with git+ssh://sr@pollux.denx.org/home/sr/git/u-boot/denx-merge-sr 2007-01-13 08:01:31 +01:00
Stefan Roese
95981778cf [PATCH] Update 440SP(e) cpu revisions 
Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.

Signed-off-by: Stefan Roese <sr@denx.de>
 2007-01-13 08:01:03 +01:00
Stefan Roese
77ddc5b9af [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed 
Now the board revision and the current PCI bus speed are printed after
the board message.

Also the EBC initialising is now done via defines in the board config
file.

Signed-off-by: Stefan Roese <sr@denx.de>
 2007-01-13 07:59:56 +01:00
Stefan Roese
36adff362c [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed 
Now the board revision and the current PCI bus speed are printed after
the board message.

Also the EBC initialising is now done via defines in the board config
file.

Signed-off-by: Stefan Roese <sr@denx.de>
 2007-01-13 07:59:19 +01:00
Heiko Schocher
ca43ba18e9 Added support for the SOLIDCARD III board from Eurodesign 
Signed-off-by: Heiko Schocher <hs@denx.de>
 2007-01-11 15:44:44 +01:00
Reinhard Thies
6abaee4262 Adjusted default environment for cam5200 board. 2007-01-10 16:51:05 +01:00
Detlev Zundel
0350e79d2a Merge with /home/m8/git/u-boot/ 2007-01-10 16:36:51 +01:00
Marian Balakowicz
d9384de2f5 CAM5200 flash driver modifications: 
- use CFI driver (replaces custom flash driver) for main 'cam5200' target
- add second build target 'cam5200_niosflash' which still uses custom driver
 2007-01-10 00:26:15 +01:00
Markus Klotzbuecher
67fea022fa SPC1920: cleanup memory contoller setup 2007-01-09 16:02:48 +01:00
Markus Klotzbuecher
8fc2102faa Fix the cpu speed setup to work with all boards. 2007-01-09 14:57:14 +01:00
Markus Klotzbuecher
9295acb774 SPC1920: add support for the FM18L08 Ramtron FRAM 2007-01-09 14:57:13 +01:00
Markus Klotzbuecher
38ccd2fdf3 SPC1920: update the HPI register addresses to work with the second 
generation of hardware
 2007-01-09 14:57:13 +01:00
Markus Klotzbuecher
5921e5313f Miscellanious spc1920 related cleanups 2007-01-09 14:57:13 +01:00
Markus Klotzbuecher
0be62728aa Add support for the DS3231 RTC 2007-01-09 14:57:12 +01:00
Markus Klotzbuecher
8139567b60 SMC1 uses external CLK4 instead of BRG on spc1920 2007-01-09 14:57:11 +01:00