[PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed

Now the board revision and the current PCI bus speed are printed after
the board message.

Also the EBC initialising is now done via defines in the board config
file.

Signed-off-by: Stefan Roese <sr@denx.de>
This commit is contained in:
Stefan Roese 2007-01-13 07:59:56 +01:00
parent 36adff362c
commit 77ddc5b9af
2 changed files with 21 additions and 18 deletions

View File

@ -39,24 +39,6 @@ int board_early_init_f(void)
reg = mfdcr(ebccfgd);
mtdcr(ebccfgd, reg | 0x04000000); /* Set ATC */
mtebc(pb0ap, 0x03017300); /* FLASH/SRAM */
mtebc(pb0cr, 0xfc0da000); /* BAS=0xfc0 64MB r/w 16-bit */
mtebc(pb1ap, 0x00000000);
mtebc(pb1cr, 0x00000000);
mtebc(pb2ap, 0x04814500);
/*CPLD*/ mtebc(pb2cr, 0x80018000); /*BAS=0x800 1MB r/w 8-bit */
mtebc(pb3ap, 0x00000000);
mtebc(pb3cr, 0x00000000);
mtebc(pb4ap, 0x00000000);
mtebc(pb4cr, 0x00000000);
mtebc(pb5ap, 0x00000000);
mtebc(pb5cr, 0x00000000);
/*--------------------------------------------------------------------
* Setup the GPIO pins
*-------------------------------------------------------------------*/
@ -190,8 +172,15 @@ int misc_init_r (void)
int checkboard(void)
{
char *s = getenv("serial#");
u8 rev;
u8 val;
printf("Board: Yellowstone - AMCC PPC440GR Evaluation Board");
rev = *(u8 *)(CFG_CPLD + 0);
val = *(u8 *)(CFG_CPLD + 5) & 0x01;
printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33);
if (s != NULL) {
puts(", serial# ");
puts(s);

View File

@ -301,6 +301,20 @@
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
* External Bus Controller (EBC) Setup
*----------------------------------------------------------------------*/
#define CFG_FLASH CFG_FLASH_BASE
#define CFG_CPLD 0x80000000
/* Memory Bank 0 (NOR-FLASH) initialization */
#define CFG_EBC_PB0AP 0x03017300
#define CFG_EBC_PB0CR (CFG_FLASH | 0xda000)
/* Memory Bank 2 (CPLD) initialization */
#define CFG_EBC_PB2AP 0x04814500
#define CFG_EBC_PB2CR (CFG_CPLD | 0x18000)
/*-----------------------------------------------------------------------
* Cache Configuration
*/