Commit Graph

1380 Commits

Author SHA1 Message Date
Wolfgang Denk
8ff0208d31 Switch MPC86xADS and MPC885ADS boards to use cpuclk environment
variable to set clock
Patch by Yuli Barcohen, 05 Jun 2005
2006-03-12 01:55:43 +01:00
Wolfgang Denk
f47b661141 RPXlite configuration fixes
- Use correct flash sector size
- Use correct memory test end address
- Add support for bzip2 compression
- Various small fixes
Patch by Yuli Barcohen, 05 Jun 2005
2006-03-12 01:48:55 +01:00
Wolfgang Denk
aba9f1af60 Memory configuration changes for ZPC.1900 board
- Fix SDRAM timing on both local bus and 60x bus
- Add support for second flash bank (SIMM)
- Change boot flash base
Patch by Yuli Barcohen, 05 Jun 2005
2006-03-12 01:45:44 +01:00
Wolfgang Denk
5797b821dc Add support for Adder boards with 16MB SDRAM;
add support for second FEC on Adder87x board.
Patch by Yuli Barcohen, 05 Jun 2005
2006-03-12 01:43:03 +01:00
Wolfgang Denk
7c54c7018e Fix conditional for including ks8695eth driver
Patch by Greg Ungerer, 04 Jun 2005
2006-03-12 01:40:01 +01:00
Wolfgang Denk
92b197f0da Fix Makefile: include config.mk only after CROSS_COMPILE is defined
Patch by Friedrich Lobenstock, 02 Jun 2005
2006-03-12 01:37:50 +01:00
Wolfgang Denk
82d716fd0d Fix comment in common/soft_i2c.c
Patches by Peter Korsgaard/Tolunay Orkun, 26 May 2005
2006-03-12 01:30:45 +01:00
Wolfgang Denk
611125a292 Cleanup compiler warnings.
Patch by Greg Ungerer, 21 May 2005
2006-03-12 01:23:43 +01:00
Wolfgang Denk
2281490485 Word alignment fixes for word aligned NS16550 UART
Patch by Jean-Paul Saman, 01 Mar 2005
2006-03-12 01:21:19 +01:00
Wolfgang Denk
d509b81210 Fix behaviour if gatewayip is not set
Patch by Robin Gilks, 23 Dec 2004
2006-03-12 01:13:30 +01:00
Wolfgang Denk
84ef51a632 Fix cleanup for netstart board.
Remove build results from repository
2006-03-12 00:04:20 +01:00
Wolfgang Denk
d2ed2f661b More GCC 4.x woes 2006-03-11 23:07:09 +01:00
Wolfgang Denk
8de7ed3abe More GCC 4.x code cleanup 2006-03-11 22:56:07 +01:00
Wolfgang Denk
d52fb7e3d1 Some code cleanup for GCC 4.x 2006-03-11 22:53:33 +01:00
Wolfgang Denk
4367a01036 Update CHANGELOG 2006-03-11 19:15:27 +01:00
Markus Klotzbücher
5536b2b5a9 Merge with http://www.denx.de/git/u-boot.git 2006-03-09 10:38:46 +01:00
Wolfgang Denk
83784bf63f Merge with /home/tur/nand/u-boot 2006-03-08 16:59:03 +01:00
Markus Klotzbücher
e4558768ae Merge /home/tur/nand/u-boot/ 2006-03-08 10:24:21 +01:00
Bartlomiej Sieka
3d65390e21 Fixed a bug in saveenv(). Credit: Markus Klotzbuecher.
> @@ -115,7 +115,7 @@ int saveenv(void)
2006-03-08 08:32:43 +01:00
Markus Klotzbücher
8371a2c0d4 Enable simple (non-redundant) NAND environment on delta board. 2006-03-08 00:13:40 +01:00
Markus Klotzbuecher
3c4eb0880b Some minor fixes to environment in NAND code. 2006-03-08 00:04:04 +01:00
Wolfgang Denk
9c575e51de Add support for Intel Monahans CPU on Zylonite and Delta boards
(This is Work in Progress!)
2006-03-07 00:33:28 +01:00
Wolfgang Denk
1f62bc2d08 Add support for TQM8260-AI boards. 2006-03-07 00:32:07 +01:00
Wolfgang Denk
0be248fa9a Cleanup (get rid of debug code that sneaked in) 2006-03-07 00:22:36 +01:00
Wolfgang Denk
951a954b77 Merge with /home/wd/git/u-boot/master
Code cleanup.
2006-03-06 23:18:48 +01:00
Markus Klotzbücher
ac7d97dcbb Turned on SDRAM scrubbing. 2006-03-06 18:47:44 +01:00
Markus Klotzbücher
43638c674a Cleanup of NAND support of delta board using the Monahans Data Flash
Controller.
2006-03-06 15:04:25 +01:00
Markus Klotzbücher
f9e029184b NAND finally working. Two bugs fixed:
* For READ_STATUS and READID commands always 8 bytes need to be read from
   NDDB. Otherwise they stay there and get send to flash as the first data
   word when writing.

 * In nand_base.c the oob variable is not reset so this->oob_buf is
   overwritten what eventually screws up the bad block descriptor table.
2006-03-06 13:45:42 +01:00
Wolfgang Denk
bfc81252c0 Minor code cleanup 2006-03-06 13:03:37 +01:00
Wolfgang Denk
4e3ccd2692 Merge the new NAND code (testing-NAND brach); see doc/README.nand
Rewrite of NAND code based on what is in 2.6.12 Linux kernel
Patch by Ladislav Michl, 29 Jun 2005

[Merge with /home/tur/nand/u-boot]
2006-03-06 11:25:22 +01:00
Bartlomiej Sieka
addb2e1650 Re-factoring the legacy NAND code (legacy NAND now only in board-specific
code and in SoC code). Boards using the old way have CFG_NAND_LEGACY and
BOARDLIBS = drivers/nand_legacy/libnand_legacy.a added. Build breakage for
NETTA.ERR and NETTA_ISDN - will go away when the new NAND support is
implemented for these boards.
2006-03-05 18:57:33 +01:00
Markus Klotzbücher
bf7cac033b Lots of new stuff:
* Debug message can be turned on and off.
 * Waiting for events now times out.
 * Implemented RESET command.
 * Added appropriate nand_bbt_descriptor and nand_oobinfo.

Remaining Problems:
 * Read Status still behaves weird an returns invalid stuff sometimes.
 * ECC Placement does not respect our scheme in nand_oobinfo.
2006-03-04 18:35:51 +01:00
Stefan Roese
f1ee982506 Add lowboot target to mcc200 board
Patch by Stefan Roese, 4 Mar 2006
2006-03-04 14:57:03 +01:00
Markus Klotzbücher
f8785e96c9 Erasing works too now. The CS don't care causes problem with READSTATUS,
don't ask me why. There are still bugs in the bad block logic.
2006-03-03 20:13:43 +01:00
Markus Klotzbücher
24e1217be3 Write operation is working. Turned out that the READSTATUS hack was wrong
after all.
2006-03-03 16:09:28 +01:00
Markus Klotzbücher
9187a35b6c Writing is working, but there's still a bug that causes the data written to
start at an offset of 4 bytes from the start of the page.
2006-03-03 15:37:01 +01:00
Markus Klotzbücher
19fdeff433 Implemented writing, not working yet. 2006-03-03 12:11:11 +01:00
Markus Klotzbücher
e2053f9c7a Moved the waiting loop for "Read Data Request" RDDREQ into the
delta_cmdfunc function, because this bit is only set once after a command
is sent and this allows read functions to be called multiple times.
2006-03-02 14:02:36 +01:00
Wolfgang Denk
aed9e2269c Merge with /home/sr/git/u-boot/cfi-flash-fix 2006-03-02 12:30:17 +01:00
Markus Klotzbücher
bb1ff049fb Read bug fixed. Now "nand bad" list the badblocks correctly (i hope, since
there are 0)
2006-03-02 12:10:01 +01:00
Wolfgang Denk
4f71866470 Make CFG_NO_FLASH work on ARM systems
Patch by Markus Klotzbuecher, 27 Feb 2006
2006-03-02 11:03:05 +01:00
Markus Klotzbücher
481911c78c Further NAND stuff implemented. Basic read commands seem to work. 2006-03-01 23:33:27 +01:00
Stefan Roese
f18e874ad5 Fix problem with flash_get_size() from CFI driver update
Patch by Stefan Roese, 1 Mar 2006
2006-03-01 17:00:49 +01:00
Markus Klotzbücher
e8cd00835e All subsystem clocks not immediately need are turned at reset. 2006-02-28 23:11:07 +01:00
Markus Klotzbücher
00c35bd214 Added GPIO initialization of DF signal. Still not working. 2006-02-28 22:51:01 +01:00
Wolfgang Denk
82f2e33a8d Update mcc200 config: Disable PCI and DoC, use 133 MHz IPB clock,
use hush shell.
2006-02-28 18:39:20 +01:00
Markus Klotzbücher
6949328d7d First steps implementing NAND support. Not working, fails to read ID. 2006-02-28 18:05:25 +01:00
Wolfgang Denk
f6c0068fc1 Merge with Stefan Roese's branch with CFI driver fixes 2006-02-28 16:42:50 +01:00
Wolfgang Denk
36d2c5387d Merge with /home/wd/git/u-boot/master 2006-02-28 16:39:47 +01:00
Stefan Roese
58ad497833 Convert mcc200 to use common CFI flash driver
Patch by Stefan Roese, 28 Feb 2006
2006-02-28 15:33:28 +01:00