Commit Graph

67844 Commits

Author SHA1 Message Date
Patrick Delaunay
890fc370a9 usb: host: ehci-hcd: change trace level for phy errors managed by uclass
As the error message is now displayed by generic phy functions,
the pr_err can be change to pr_debug.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-09-08 08:46:32 -04:00
Patrick Delaunay
3b417a7d82 usb: host: ohci: change trace level for phy errors managed by uclass
As the error message is now displayed by generic phy functions,
the dev_err can be change to dev_dbg.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-09-08 08:46:32 -04:00
Patrick Delaunay
f286e37c14 board: sunxi: change trace level for phy errors managed by uclass
As the error message is now displayed by generic phy functions,
the pr_err can be change to pr_idebug.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-09-08 08:46:32 -04:00
Patrick Delaunay
2041ae5a5a phy: generic: add error trace to detect PHY issue in uclass
Add an error trace for PHY errors directly in generic phy
functions provided by PHY uclass.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-09-08 08:46:32 -04:00
Tom Rini
314b9b4a38 Merge branch 'remove-config-nr-dram-banks-v9-2020-08-26' of https://gitlab.denx.de/u-boot/custodians/u-boot-marvell into next 2020-09-07 14:31:00 -04:00
Tom Rini
96d66a9b8c Prepare v2020.10-rc4
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-09-07 14:17:33 -04:00
Tom Rini
a475ad7f9e configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-09-07 14:05:55 -04:00
Tom Rini
06193ca210 Pull request for UEFI sub-system for efi-2020-10-rc4
Bug fixes are provided in the following areas:
 
 * convert file system debug and print messages go log messages
 * convert UEFI booting messages to log messages
 * UEFI related code clean up and simplification
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl9VNw4ACgkQxIHbvCwF
 GsS7yA/+LX1HwNao+m+JNylGN9zdhr9S964Y2HHTKeicDbN2ejSVvEgrnHble9wp
 WNmxu+2AQUapKgPU6QlNBulGvwBL+3GGtESENHcV5gg9tW1dvvVNFoPLtg+LTgL1
 0R35Gk5OHiWJb5pV1ogYuXwb8i8qca7EbZoP281jnY4+VTvkjrevR7fYOdKRhdAz
 b/KWX53wiIYi09BXO7ADIoN2aBBWvK4aQRvZOoiNJuaDGC7OxveCos54hOcQxWqE
 QSpYY6HbOD8G50qZCSb6puCxzqK0bsuswvHDpoofkyjQxeXf2Z7pUXkeBl0DxO8b
 QlUUP+XRSsvH0jMOCidFXiKlhM6356oYIWy/vXqnMkvCKOzdBEBQ5i1OnU2SSPMe
 zPc1Pc46G3yaYpoE+MvW2xSv6Zm6C0TV8kZIYQmd48IcbLL9fbU+v5HaJHi3yPEN
 UyX9Kt/eLwEgJbUXb95vpTGSeErt5OBdLhfDtw2Hr22vmeVKQ3Zgs6rnXM7+m0Kx
 xFDHAglm9NI8prZoxZ43S1ISLDpHDuhxJdieFt2C0f1He/aDLBcuPGtOQa2DXsJM
 J/08soX/YBPpREr0nsd4Komimq6tsL2EY4jue/3zbXByAWwH5chSt/nhm2LKd/31
 TPCcBOdzsCghcRT/K76VNzknE9b8dds56gJJBr/CyQ2CulXsB1A=
 =XqjX
 -----END PGP SIGNATURE-----

Merge tag 'efi-2020-10-rc4' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for efi-2020-10-rc4

Bug fixes are provided in the following areas:

* convert file system debug and print messages go log messages
* convert UEFI booting messages to log messages
* UEFI related code clean up and simplification
2020-09-07 08:49:50 -04:00
Heinrich Schuchardt
d2a885720b efi_selftest: simplify Makefile
CONFIG_EFI_LOADER cannot be selected for ARMv7-M CPUs. So don't check it in
the Makefile.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-06 21:21:41 +02:00
Heinrich Schuchardt
578d7cc8fa efi_loader: remove duplicate image size check
The image size is checked in efi_load_pe(). Avoid checking it twice.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-06 21:21:41 +02:00
Heinrich Schuchardt
5b94e26f1a efi: clean up efi command
* Eliminate superfluous enum value EFI_TABLE_END.
* Use correct variable type for the memory type.
* Check validity of memory type.
* Make efi_build_mem_table static.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-06 21:21:41 +02:00
Heinrich Schuchardt
0f7878b853 efi_loader: error message if image not authenticated
Currently if the bootefi command fails due to missing authentication, the
user gets no feedback.

Write a log message 'Image not authenticated' if LoadImage() fails due to
missing authentication.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-06 21:21:41 +02:00
Heinrich Schuchardt
24586059d3 efi_loader: log function in image loader
Use log_err() for error messages.
Replace debug() by EFI_PRINT().

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-06 21:21:41 +02:00
Heinrich Schuchardt
c2f010393b efi_loader: log messages for bootefi command
Write log messages when booting via the bootefi command to allow tracking
on the syslog server. Example messages are

    Booting /snp.efi

or

    Booting /MemoryMapped(0x0,0x4fe00000,0x35a40)
    Loading image failed

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-06 21:21:41 +02:00
Heinrich Schuchardt
0d32d8cf9d fs: convert error and debug messages to log
Use log functions for error and debug messages of the file-system.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-06 21:21:41 +02:00
Tom Rini
e5df264e7a Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell
- Fix SATA issue on Armada 3720
- Enable more SPI NOR chips in espressobin defconfig
2020-09-04 10:09:14 -04:00
Konstantin Porotchkin
3e5420e99a defconfig: espressobin: Add support for ISSI SPI flashes
Enable support of ISSI SPI flashes found on EspressoBIN boards

Change-Id: I6de61c48f108fb4f410f321b9db45887d23212e5
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-on: http://vgitil04.il.marvell.com:8080/61455
Tested-by: iSoC Platform CI <ykjenk@marvell.com>
Reviewed-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-by: Stefan Chulski <stefanc@marvell.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-09-04 14:02:00 +02:00
Konstantin Porotchkin
2f8cfd030e defconfig: espressobin: Include support for Gigadevice SPI
Include support for CONFIG_SPI_FLASH_GIGADEVICE for supporting
newly produces EspressoBin boards (v7)

Change-Id: I5d4b972cbe2ee5a9d52ce9908794ad4e1b59ee3b
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-on: http://vgitil04.il.marvell.com:8080/61236
Tested-by: iSoC Platform CI <ykjenk@marvell.com>
Reviewed-by: Igal Liberman <igall@marvell.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-09-04 14:02:00 +02:00
zachary
7757c85199 phy: marvell: a3700: add sata comphy on lane 2 with invert option
- This patch moves sata phy powerup from dedicate phy to compphy
  and adds invert option for sata powerup routine.

Change-Id: I1b4e8753e2b2c14c6efa97bca2ffc7d2553d8a90
Signed-off-by: zachary <zhangzg@marvell.com>
Signed-off-by: Ken Ma <make@marvell.com>
Reviewed-on: http://vgitil04.il.marvell.com:8080/53601
Reviewed-by: Igal Liberman <igall@marvell.com>
Tested-by: Igal Liberman <igall@marvell.com>
[a.heider: adapt to mainline]
Signed-off-by: Andre Heider <a.heider@gmail.com>
Tested-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-09-04 14:02:00 +02:00
Tom Rini
9bfb567e5f Merge branch 'master' of git://git.denx.de/u-boot-usb
- Mostly DFU fixes and r8152 fixes
2020-09-03 09:48:28 -04:00
Tom Rini
7f4d3c0445 Merge branch 'master' of git://git.denx.de/u-boot-sh
- SH serial bugfix
2020-09-03 09:00:35 -04:00
Tom Rini
f766e8bced Merge branch 'for-tom' of https://github.com/lftan/u-boot
- SoCFPGA bugfix
2020-09-03 08:59:16 -04:00
Chee Hong Ang
6b6307ed22 arm: socfpga: soc64: Check FPGA Config status register before bridge reset
Instead of querying SDM for FPGA configuration status through mailbox
messages, U-Boot now checks System Manager's FPGA Config status register
for FPGA configuration status before resetting bridge.

Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-09-03 11:26:07 +08:00
Tom Rini
7149077353 Azure/GitLab: Update to latest Docker container
- New base snapshot
- Fix for high UID/GID numbers on a toolchain

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-09-02 09:22:29 -04:00
Tom Rini
502f0489f1 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86
- Fix parsing of "mtrr list" command
- Introduce USE_EARLY_BOARD_INIT option and remove dead codes for most
  x86 boards
2020-09-01 11:02:54 -04:00
Gary Bisson
293a6dfeb9 fastboot: getvar: fix partition-size return value
The size returned by 'getvar partition-size' should be in bytes, not in
blocks as fastboot uses that value to generate empty partition when
running format [1].

Note that the function was already returning the proper size in bytes
for NAND devices (see struct part_info details).

[1]
https://android.googlesource.com/platform/system/core/+/refs/heads/android10-release/fastboot/fastboot.cpp#1500

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
2020-09-01 14:47:43 +02:00
yurii.pidhornyi
64af06ce91 fastboot: Fix fastboot reboot fail by changing functions order
It was revealed that when the fastboot_tx_write_str function is called
without the previously initialized fastboot_func->in_req->complete field,
a copy of in_req will be sent to the I/O requests queue without
an initialized field.

Moving a piece of code with the initializing of the
fastboot_func->in_req->complete field above transmit_tx allows to solve
this problem.

Fixes: 65c96757fe "usb: fastboot: Convert USB f_fastboot to shared fastboot"
Signed-off-by: yurii.pidhornyi <yurii.pidhornyi@globallogic.com>
2020-09-01 14:47:43 +02:00
Sherry Sun
405217a033 f_sdp: Change bInterval of interrupt endpoint to 3
Since the USB HID limits the maximum bandwidth(3072) for interrupt
endpoint transfers, when the bInterval set to 1, we can only support 3
boards to run sdp at the same time. In order to support more boards,
change the bInterval of interrupt endpoint to 3, which will not affect
the transmission speed.

Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-09-01 14:47:43 +02:00
Sherry Sun
9e06c5c55a f_sdp: Add EP1_OUT as default data receive pipe in sdp
EP0 has been used to transfer file data in sdp before, but the max
packetsize of ep0 is 64 bytes. So in order to improve the file transfer
speed, here add the EP1_OUT interrupt endpoint which max packetsize is
set to 1024 byte.

After testing, it turns out that using ep1out is twice as fast as using
ep0 while receiving data in sdp.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-09-01 14:47:43 +02:00
Peng Fan
27c803848b spl: add g_dnl_get_board_bcd_device_number
Add g_dnl_get_board_bcd_device_number, the new BCD value is used by uuu to distinguish
if the SPL supports the SDPV.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-09-01 14:47:43 +02:00
Peng Fan
b0e9f3e593 f_sdp: Support searching and loading FIT or container image
Add support to f_sdp to search and load iMX8 container image or iMX8M
FIT image by new UUU command SDPV.

When using the SDPV, the uuu will continue to send out data after first
level boot loader used by ROM. This means uuu won't skip to the offset
of the second boot loader, and the padding data before second boot loader
will be sent out. So we have to search the FIT header or container header
in the buffer that SDP received.

Also change to more common method to exit f_sdp handler not depending on
SPL_FIT_FOUND flag because container loader won't set this.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-09-01 14:47:43 +02:00
Ye Li
5dee7f0b02 f_sdp: Fix wrong usb request size
Because the buffer length of sdp usb request is 65, we have to allocate
65 bytes not 64 bytes. Otherwise there is potential buffer overflow.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-09-01 14:47:43 +02:00
Ye Li
d10d429112 f_sdp: Add high speed endpoint descriptor
Add HS endpoint descriptor for SDP. So that we can use high speed endpoint,
and the SDP device can send packet with 512 byte size.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-09-01 14:47:43 +02:00
Frank Li
0ced2faba0 sdp: call board_usb_init at spl_sdp_load_image
Need initialize UDC before run sdp download

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-09-01 14:47:43 +02:00
Jassi Brar
7ed4eac43d usb: max3420: add the gadget driver
MAX3420 implements FullSpeed USB Device over SPI.
Another version MAX3421, also implements USB Host mode.
This driver should be good for the device mode of max3421 as well.

Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2020-09-01 14:47:43 +02:00
Roman Kovalivskyi
0ebf9842e5 fastboot: Add default fastboot_set_reboot_flag implementation
Default implementation of fastboot_set_reboot_flag function that depends
on "bcb" commands could be used in general case if there are no need to
make any platform-specific implementation, otherwise it could be
disabled via Kconfig option FASTBOOT_USE_BCB_SET_REBOOT_FLAG.

Please note that FASTBOOT_USE_BCB_SET_REBOOT_FLAG is mutually exclusive
with some platforms which already have their own implementation of this
function.

Signed-off-by: Roman Kovalivskyi <roman.kovalivskyi@globallogic.com>
2020-09-01 14:47:43 +02:00
Roman Kovalivskyi
2b2a771b40 fastboot: Add support for 'reboot fastboot' command
Android 10 adds support for dynamic partitions and in order to support
this userspace fastboot must be used[1]. New tool fastbootd is
included into recovery.

Userspace fastboot works from recovery and is launched if:
1) - Dynamic partitioning is enabled
2) - Boot control block has 'boot-fastboot' value into command field
The bootloader is expected to load and boot into the recovery image
upon seeing boot-fastboot in the BCB command. Recovery then parses the
BCB message and switches to fastbootd mode[2].

Please note that boot script is expected to handle 'boot-fastboot'
command in BCB and load into recovery mode.

Bootloader must support 'reboot fastboot' command which should reboot
device into userspace fastboot to accomodate those changes[3].

Another command that bootloader must support[3] is 'reboot recovery'. This
command should simply reboot device into recovery mode.

[1] - https://source.android.com/devices/bootloader/fastbootd
[2] - https://source.android.com/devices/bootloader/fastbootd#unified_fastboot_and_recovery
[3] - https://source.android.com/devices/bootloader/fastbootd#modifications_to_the_bootloader

Signed-off-by: Roman Kovalivskyi <roman.kovalivskyi@globallogic.com>
Signed-off-by: Roman Stratiienko <r.stratiienko@gmail.com>
Change-Id: I9d2bdc9a6f6f31ea98572fe155e1cc8341e9af76
2020-09-01 14:47:43 +02:00
Roman Kovalivskyi
851737ab89 fastboot: Extend fastboot_set_reboot_flag with reboot reason
Extend fastboot_set_reboot_flag arguments with reboot reason so that
it could handle different reboot cases in future.

Signed-off-by: Roman Kovalivskyi <roman.kovalivskyi@globallogic.com>
2020-09-01 14:47:43 +02:00
Heinrich Schuchardt
73f4ebb659 dfu: fix dfu tftp on sandbox
The environment variable loadaddr is in the virtual address space of the
sandbox. To get the actual memory address where the FIT image has been
loaded we have to convert this address according to the memory mapping of
the sandbox.

Equally the addresses in the *.its file have to be converted when used in
the dfu_ram driver.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-01 14:47:43 +02:00
Heinrich Schuchardt
9337037518 configs: qemu: enable dfu testing
For testing automated updates via dfu and mtd we need the dfu and mtd
commands as well as preboot support.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-01 14:47:43 +02:00
Heinrich Schuchardt
40c79420d0 dfu: DFU_MTD depends on CMD_MTDPARTS
Function mtdparts_init() is needed for the DFU MTD driver.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-01 14:47:43 +02:00
Heinrich Schuchardt
4e620eb98b dfu: fix typo parameteres
%s/parameteres/parameters/g

Even if a line exceeds 80 characters we should not split output strings
to make debugging easier.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-01 14:47:43 +02:00
Filip Brozovic
a17c0cb85e fastboot: Support defining raw partitions without a partition table
Add support for defining raw fastboot partitions in eMMC by specifying
the offset and size in an environment variable. Optionally, the eMMC
hardware partition number may also be specified.

This makes it possible to e.g. update only part of the eMMC boot
partition, instead of having to write the entire partition.

Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
2020-09-01 14:47:43 +02:00
Ye Li
1468a1cc72 usb: ci_udc: Add function to remove usb device
When unregister gadget driver in ci_udc, the usb device is not
removed or stop. This causes next "usb start" fails to work.

Add a new interface "usb_remove_ehci_gadget" in usb-uclass to
remove the usb device for DM driver. Using "usb_lowlevel_stop" for
non-DM driver.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-09-01 14:47:43 +02:00
Ye Li
213fa47dac usb: gadget: Fix controller index in UMS
The usb mass storage (f_mass_storage.c) uses fixed usb index 0,
this causes problem while CDNS3 USB controller index is 1.
Modify the API of fsg to pass the controller index.

Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-09-01 14:47:43 +02:00
Hayes Wang
3a41086f6a eth/r8152: support RTL8153B/RTL8154B
This is used to support RTL8153B and RTL8154B.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
2020-09-01 14:47:36 +02:00
Hayes Wang
9f6142aa0a eth/r8152: modify rtl_clear_bp function
The original rtl_clear_bp() is used to clear the firmware of both
PLA and USB MCU. The new one could clear the firmware of PLA or
USB independently. It is unnecessary to clear firmware, if there
is no one to be updated.

Besides, clear the firmware by writing the relative registers in
bulk.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
2020-09-01 14:47:36 +02:00
Hayes Wang
16b9417b6a eth/r8152: reset PHY after setting it
Some settings of PHY have to work after resetting PHY.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
2020-09-01 14:47:36 +02:00
Hayes Wang
d74a76234f eth/r8152: reset bmu after disabling Tx/Rx
Reset bmu after disabling Tx/Rx. This is used to clear the FIFO of
Tx/Rx. The remained data may be transferred after Tx/Rx is re-enabled.
And it results in garbage data.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
2020-09-01 14:47:36 +02:00
Marek Vasut
f5ba5c90d4 serial: sh: Improve FIFO empty check on RX
If the SCIF is receiving data quickly enough, it may happen that the
SCxSR_RDxF flag is cleared in sh_serial_getc_generic(), while the
FIFO still contains data. If that happens, the serial_getc_check()
reports no data in the FIFO as the flag is no longer set. Add one
more check, if the SCxSR_RDxF is not set, read out the FIFO level
and if there are still characters in the FIFO, permit reading them
out.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-09-01 14:46:41 +02:00