Commit Graph

5588 Commits

Author SHA1 Message Date
Giulio Benetti
8d9c0762a8 imx: imxrt1050-evk: Add support for the NXP i.MXRT1050-EVK
This commit adds board support for i.MXRT1050-EVK from NXP. This board
is an evaluation kit provided by NXP for i.MXRT105x processor family.

More information about this board can be found here:
https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1050-evaluation-kit:MIMXRT1050-EVK

The initial supported/tested devices include:
- Debug serial
- SD

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14 22:54:00 +01:00
Joris Offouga
bc9b06533a pico-imx7d: Convert to DM_ETH
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2020-01-14 22:24:08 +01:00
Joris Offouga
e8f4788eb8 pico-imx7d: Disable USB_ETHER support for bl33 defconfig
For DM_ETH support , it's require to disable this config.
When this config is enable, This generate a error with spl in linker script

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2020-01-14 22:23:54 +01:00
Fabio Estevam
c3061ce8f1 imx8qxp_mek: Select CONFIG_NET_RANDOM_ETHADDR
Some i.MX8QXP MEK boards do not have MAC address stored
and hang during eth driver probe:

Error: ethernet@5b040000 address not set.

(Board hangs)

To fix this problem select CONFIG_NET_RANDOM_ETHADDR so that
a valid MAC address can be used in such case.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-01-14 22:16:49 +01:00
Anatolij Gustschin
eb79cafea2 imx: add imx8x based deneb board
Add support for Capricorn Deneb SoM variant.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2020-01-14 22:15:21 +01:00
Anatolij Gustschin
7b5b934313 imx: add imx8x capricorn giedi board
Add support for i.MX8X based Capricorn Giedi SoM.

Supported interfaces: GPIO, ENET, eMMC, I2C, UART.

Console output:

  U-Boot SPL 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100)
  Trying to boot from MMC1
  Load image from MMC/SD 0x3e400

  U-Boot 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100) ##v01.07

  CPU:   NXP i.MX8QXP RevB A35 at 1200 MHz at 30C

  Model: Siemens Giedi
  Board: Capricorn
  Boot:  MMC0
  DRAM:  1022 MiB
  MMC:   FSL_SDHC: 0
  Loading Environment from MMC... OK
  In:    serial@5a080000
  Out:   serial@5a080000
  Err:   serial@5a080000
  Net:   eth1: ethernet@5b050000 [PRIME]
  Autobooting in 1 seconds, press "<Esc><Esc>" to stop

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2020-01-14 22:15:21 +01:00
Eugeniu Rosca
b84acf1056 dtimg/am57xx_evm_defconfig: Rename dtimg to adtimg
Rename the existing 'dtimg' command to 'adtimg', in order to:
 - Suggest the Android origins and scope
 - Be consistent with the upcoming 'abootimg' command (naming
   suggested by Simon [*])

The change in _not_ backward compatible, but its benefits outweigh its
downsides, given that we don't expect active users of 'dtimg' today.

Perform the rename in several steps:
 1. Rename *.c file and Kconfig symbol. This should allow
    'git log --follow' to properly track the history of 'adtimg.c'
 2. 's/dtimg/adtimg/g' in the internal namespace of 'adtimg.c'

ELF comparison [**] before and after shows no functional change.

[*] https://patchwork.ozlabs.org/patch/1182212/#2291600
[**] diff -u <(objdump -d cmd/dtimg.o) <(objdump -d cmd/adtimg.o)

Cc: Tom Rini <trini@konsulko.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Simon Glass<sjg@chromium.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
2020-01-10 14:18:26 -05:00
Holger Brunck
68af8106a3 boards/km_arm: enable support for Macronix SPI NOR flash
The M25P80 and M25P32 SPI flashes from Numonix/Micron
will be replaced by Marconix MX25L80 and MX25L32 flashes.

Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com>
CC: Stefan Roese <sr@denx.de>
CC: Valentin Longchamp <valentin.longchamp@ch.abb.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-01-10 10:25:13 -05:00
Holger Brunck
e7fdb3462d arm/km: remove board KMCOGE3UN
This target is out of maintenance and can be removed.

Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com>
CC: Stefan Roese <sr@denx.de>
CC: Valentin Longchamp <valentin.longchamp@ch.abb.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-01-10 10:25:13 -05:00
Holger Brunck
58e1fdb051 km/boards: fix typo for MAC address offset config option
This patch only fixes a typo.

Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com>
CC: Stefan Roese <sr@denx.de>
CC: Valentin Longchamp <valentin.longchamp@ch.abb.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-01-10 10:25:13 -05:00
Angelo Durgehello
549c5cda7c configs: add eth dm support for all ColdFire boards
Add dm eth config options for all involved ColdFire-based boards.

Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
2020-01-10 10:25:09 -05:00
Tom Rini
a74a2134b2 Merge branch 'master' of git://git.denx.de/u-boot-usb
- DFU updates
2020-01-09 08:51:57 -05:00
Tom Rini
7086de4948 Pull request for UEFI sub-system for efi-2020-04-rc1
This pull request provides:
 
 * support for FIT images for UEFI binaries
 * drivers for hardware random number generators
 * an implementation of the EFI_RNG_PROTOCOL
 * a sub-command for efidebug to display configuration tables
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl4UvR4ACgkQxIHbvCwF
 GsRJZhAAmlsRBUS3fvFV5GtB8bkWcSU4/s3TVYJui0fOhY02ZDIKkrubZzDx/Lgv
 9OaVwjQ3JSmq5XkDmXqzNDzYkxitQ5Qf/cFiBF5HpA3USkOttb3GIfgj0qD6DGzM
 cKyhgJm7bZoMN/mkIzkWsry1ASwYpB3ipyoJAfRfryw9ok4j9RfJ7pPieeycGWGJ
 0sZsJI0v7e6xt5Qsytk5sZNvlCFhyhl2OMYliAlRKBryh31Ahr2e6KEwsJh7VyCP
 4K12eBTqIJq1qHk7Lr0g1CnMCdeOT8J7qvX1+kvt3HupxTMkYRv2AR5CQWRKck5E
 RsmcKmiTHz/76w6Gk7kLan7y0UCSHnfHQ3aSEkkx4O/v4OC85VteyLAEriS7J9Hx
 xSNyoj01U2wG3SLrUjkAZv6JgyC8uCezRzOHOqN25Q2mRROVq781mcMfRXwdq6cD
 L4rrTsIDPzNF19wDa7P5tK6JMF8BDifLNuMTQj5LdJYMHJTJZBWG/vTNFPEldaIP
 D9RPoCibTolpiuCYneeXJURHGm5yme7KoxAPiMU+fAWO1F6SO25zxYA7MAiY4OYw
 zk7Ipaat0luIu1gC2ICYxrLnsMBq9glABrdq99i0DpUg9n9N/7SpcJSj2DMrFGmY
 u4yenWM1KTgjLoVHRhpTbCzF15GlYN4SHXV5iYO+Pof5WQYnv8w=
 =SjPV
 -----END PGP SIGNATURE-----

Merge tag 'efi-2020-04-rc1' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for efi-2020-04-rc1

This pull request provides:

* support for FIT images for UEFI binaries
* drivers for hardware random number generators
* an implementation of the EFI_RNG_PROTOCOL
* a sub-command for efidebug to display configuration tables
2020-01-08 18:57:11 -05:00
Tom Rini
21aede21b0 UniPhier SoC updates for v2020.04
- add pinmux nodes for I2C ch5, ch6
 
 - enable SPI driver and command
 -----BEGIN PGP SIGNATURE-----
 
 iQJSBAABCgA8FiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl4WDlkeHHlhbWFkYS5t
 YXNhaGlyb0Bzb2Npb25leHQuY29tAAoJED2LAQed4NsG/tAP/3V1E52ESaMjqjSn
 eU2jrXMJFTWcvkVUfLzWnXuApPPx5Xm7nGVVlJory3z8PI6KJFuZJTejeS2tOtU3
 5JjQ56GyldXwyGQp8WsQL8RhGCMovlbUNXuGSR4MNoN0U+81Y1RGYuaNP+qwXfnK
 BVtQBdtnAuH4RxywNNVsxwGoCra7b30cKdmiowc6cb6u4RSnDv42EpgHan2JCgYx
 pui7+hLK7ZdN/ssgc6LquuwIW6IICAdlLosMjsmVty53yLrcXRZtiVHEZskgLC+O
 L84fqDSShgoNnaJJFC2kebuf6iFzw4ZPmSU2tEW4mGvXLC7OEqwvOZqrs0GVsFhz
 48CnkqXYCbfm696minmikXDSVSy1A2ZlRV8bJID0vFjUNot5bor9VSRpe9UV9hqv
 PsevZWPfTuravk7TUBzdn2/dAEtDuzUHSt6v5AJI+08Sph1qYVyGOizpAOJUkv7E
 p0dBM3hhSeGE3kNPwWOB1bHjEmyIc1dXeH5ZNYf0mb1tIEOVSzJMJIoluBJHO6BA
 56F9eBi2rC9gL9R5qV9guugdidYeLE7tys7Q6P3NFyxiouENB/Dcd0e2TSc474Uj
 FaDSUONYNbMP0wr8ShCPQ0RGw8dyCvYBPEdSqYVdNLZZ2TQMX/cgjz+0bDxhFq3r
 9Ol9Tlf9qPGLRDLmmA9d+xFEjyS7
 =3xuH
 -----END PGP SIGNATURE-----

Merge tag 'uniphier-v2020.04' of https://gitlab.denx.de/u-boot/custodians/u-boot-uniphier

UniPhier SoC updates for v2020.04

- add pinmux nodes for I2C ch5, ch6

- enable SPI driver and command
2020-01-08 15:25:13 -05:00
Tom Rini
deb287b561 ---------------------------------------------------------------------
Add i.MX8MP SoC and EVK board
 Update README for i.MX8MN EVK and fix mmc env
 Add pca9450 driver
 --------------------------------------------------------------------
 
 Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/634211885
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl4WDPkPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et30w0L/RGSJLeO460ULkMQMGEkbMLODzWinIuVSUUe
 wEGikQZwI4AiDWX1NA57Dpx7uVF/ADa/NT2x9YLZL8VPHgzuU7RDp57pdBymU0Wk
 k/kDqSPVkIA0CX8iF/l092vOOIKecIpxpEXblRYs+Az7Vusrwm6SxQ3hjSn6KgpY
 gtu/VB+XizejiYmE5hJhu8cvMpAeCrJ0a+qPJC+hVsvFC2wV3NoqJspMOIUt+rPm
 UCv4uSisSWf2MgR2rEYbX9IDgu7S3hcj/8Ml4f9aqQQBciS4X/Af+iUjZL/mXY2K
 ZerDGQhC92TRmTj9Ir6mf8CEAdt0scsNgTVvteN/evP85K25s2l7yrYWjyp5H/vm
 tao0H/Lr8gKlLKgMSgdLixoV8eaMHPE4I/BD+DGVIK1rOQ35zzYTJRd2PIxg7GiP
 7orW29rJrPMAMDBbeEi657u/zUS7ZUzkrLWnIIoFurUfZ83pjlqlxcT1zfZ0juJk
 z8iQKU4oKdN4gL5zQPbyqCHcCdlDJw==
 =YoPF
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20200108' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

---------------------------------------------------------------------
Add i.MX8MP SoC and EVK board
Update README for i.MX8MN EVK and fix mmc env
Add pca9450 driver
--------------------------------------------------------------------

Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/634211885
2020-01-08 15:24:50 -05:00
Tom Rini
ce022f2857 Merge branch 'master' of git://git.denx.de/u-boot-socfpga 2020-01-08 15:23:49 -05:00
Tom Rini
9af51fb3a5 - Khadas VIM3L based on Amlogic S905D3 support
- Various fixups for amlogic boards
 - Unnecessary header includes drop into video/meson
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAl4V0PgACgkQd9zb2sjI
 SdEuPw//c0APhovWXXCsRckccBF8SK3WRsVcj5M36g7WXVdUo+MXaPzDUEyDAMfU
 xS51FaN7lJJ7ntxEvJ3loFDYh0WrYoanCW+9KxMnJ0GVTdWg6nL0u4yq4exD9f4d
 N9Tv8NaN0y2Jn97Y3L70qlutVJjTzUd1oRKWmGDESvXj3+WrJdffEL0uBrCcbmF/
 kyEQ3RiDuGhfNrC/mSdhQFG2kmeQc43+Fb1OYq8Wm28zwtYvZuJpdn7FTtwGQk0+
 iCjIUN0RKcD+HedJVxHmSnOOTehydk6xQX9215ebo/tTz+WtoqXrFPjEr1mgAhRV
 ojEdJcEKAFGwTYuRDmeO6lwAv+k0fkF4drGi7uAOQa3JwD90aKgR0Ig80CzVq1vW
 m79WDHFbaQnpIGf94kONF8X0M9nWN9/XYmpJe6KuQaO7YEsIIBsbFP657pJp1J1m
 xfwzl2xlx7yaDeR8xv4/N67REuSF/ILeJA0tykkm7NEWkkBrz1d+dXiOaTceY/Wu
 z7s3QGpHINMOzuxMZKEZazt+0KQ4UlbAxYRQU3oNRkW3WaCoGimpbjC9FJa4FpoA
 Cx2PBRunzx8rK87ZS/X7VUa2v454MSkCGwpmqP+PrekoL2rsRNx/3gWHpzb+Z7E/
 nAd0uukYy/WSlzv6bfpRdemQi27gSvDnERf4dj/4kiAiMoKkeiA=
 =rkHZ
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20200108' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic

- Khadas VIM3L based on Amlogic S905D3 support
- Various fixups for amlogic boards
- Unnecessary header includes drop into video/meson
2020-01-08 15:23:37 -05:00
Masahiro Yamada
7b1c1f95c8 uniphier_{v7, v8}_defconfig: enable SPI driver and sspi command
Compile drivers/spi/uniphier_spi.c and cmd/spi.c

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-01-09 02:02:48 +09:00
Peng Fan
028c8c4119 imx: imx8mn: enable CONFIG_CMD_ERASEENV
enable CONFIG_CMD_ERASEENV to make it easy to erase env.
Use savedefconfig to generate new defconfig.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08 13:20:09 +01:00
Peng Fan
439321b264 imx: add i.MX8MP EVK board
Add basic i.MX8MP EVK board support

U-Boot SPL 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800)
power_pca9450b_init
DDRINFO: start DRAM init
DDRINFO:ddrphy calibration done
DDRINFO: ddrmix config done
Normal Boot
Failed to find clock node. Check device tree
WDT:   Not found!
Trying to boot from BOOTROM
image offset 0x8000, pagesize 0x200, ivt offset 0x0

U-Boot 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800)

CPU:   Freescale i.MX8MP rev1.0 at 1000 MHz
Reset cause: POR
Model: NXP i.MX8MPlus EVK board
DRAM:  6 GiB
MMC:   FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
Hit any key to stop autoboot:  0
u-boot=> mmc list
FSL_SDHC: 1 (SD)
FSL_SDHC: 2

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08 13:20:09 +01:00
Sughosh Ganu
23b3f3c0fc configs: sandbox: Enable random number generator(rng) device
Enable support for random number generator on sandbox configs. This is
aimed primarily at adding unit test support for rng uclass.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-07 18:08:21 +01:00
Sughosh Ganu
90950eec58 configs: stm32mp15: Enable random number generator(rng) device
Enable support for the rng device on the stm32mp15 configs.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-01-07 18:08:21 +01:00
Heinrich Schuchardt
72a60feab0 configs: qemu: enable FIT images on qemu_arm(64)_defconfig
For testing UEFI FIT images we need FIT image support on QEMU.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07 18:08:19 +01:00
Christian Hewitt
9c84c21009 boards: amlogic: add Khadas VIM3L support
Khadas VIM3L uses the same board layout as VIM3, but with an S905D3 chip
instead of A311D. Board config is derived from khadas-vim3_defconfig and
sei610_defconfig. README is based on README.khadas-vim3; the difference
is that VIM3L uses FIP files from the g12a folder in vendor sources not
the g12b folder.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: added vim3l readme into w400 MAINTAINERS]
2020-01-07 14:50:28 +01:00
Tom Rini
d8a3f5259a New for 2020.04
---------------
 
 - New boards
 	Embedded Artists COM board
 	Xea Board
 - Switch to DM:
 	Aristainetos boards
 	Toradex colibri (DM_ETH)
 	iCubox
 	GE bx50v3
 	mx7dsabre (DM_ETH)
 	cx9020
 - New features:
 	Bootaux with elf files
 	Default SYS_THUMB_BUILD for i.MX6/7
 - Fixes:
 	DHCOM i.MX6 PDK
 	Engicam
 	i.MX8M tools (imx8m_image)
 
 Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/633679664
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl4UhxIPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3MZYMAMEttt0cNxBg0/zBjNuMSn3Bq1lpN+KKsY97
 Cme06wZQdlbdfHhXyKiVfky2vjrZa1nacUgqSQlJdzvsPQbg9TE/8zxTd13BNw6C
 Tn6IHS7godvz9Puf0HD8skoYBpVm/LQKmSEfcPAEGOSnHzZx/MrMU0Qze3PgqWu5
 0xbp8yBsyVw96/zBRZtbwXy4COuS1viFrbf82EgHAZUsmXpgvJB59i8rOewwWNR1
 TpyhPbHlq42X+0Qrwq0RGtUr+t4tI6czlxeReOBgb1/YqJGJ6rEqbGm90XROW3sA
 IeU5PY7LUk8OFRQtyfBSSYgFgFmgOYzfpXe9YSUoIxV55OvCad7ksaRctjPJnKqy
 CndINrG9JnV9T5N0LczAgVFXWT49ybPziyZRDHERDg1XosuHnNk7r0co05uacYUN
 ZFgB21mzQ8qGPAd1C3tMXG05ZA9cdRCmWxKxxF6z2/2FT15euZQ0obwAR1HsiJmZ
 wLbyPl1Hi7ZkwvTT/Wk3se0zGpNj2A==
 =vOZ+
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20200107' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

New for 2020.04
---------------

- New boards
	Embedded Artists COM board
	Xea Board
- Switch to DM:
	Aristainetos boards
	Toradex colibri (DM_ETH)
	iCubox
	GE bx50v3
	mx7dsabre (DM_ETH)
	cx9020
- New features:
	Bootaux with elf files
	Default SYS_THUMB_BUILD for i.MX6/7
- Fixes:
	DHCOM i.MX6 PDK
	Engicam
	i.MX8M tools (imx8m_image)

Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/633679664
2020-01-07 08:45:43 -05:00
Tom Rini
ac0f978afd First set of u-boot-atmel features for 2020.04 cycle
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJeFDfVAAoJEB6zHgIOrC/IKfsH/2cUfXuc9IgA7L90L3g7htlS
 zLAQSC8Xk0WbgbmBJh/lq6zFWj2Mu2yfkZqRzwN8bHkmOPq40F+pEAszVtjH77HM
 FpSjMSDVWfNXuhmoiS571dehA0TGi1b2kknrAXqpOwVuMRncMCwaPi8yZYZSGlSV
 VzMtguQxD0sZg4oMZVde3tCd41smPTPNDjzLZnXdLa0b09+EtW6enGuk3vzXlS/8
 QUT68wUzkeoptJhf3pQ3BXNvkFwdNdYJ74uevDmkAYtvxyl10WNykcwYmH50Q9qq
 9plF11EizmTHlj16rWpZLx66RP0s4pziKaeGMr6S8uln33Cr9N496wPqtuDBnvA=
 =FYPj
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-atmel-2020.04-a' of https://gitlab.denx.de/u-boot/custodians/u-boot-atmel

First set of u-boot-atmel features for 2020.04 cycle

This feature set is a patch series from Tudor Ambarus which includes
parsing of the spi flash SFDP parser for SST flashes, and using those
tables to retrieve unique saved per device MAC address. This is then
used as base mac address on the SAMA5D2 Wireless SOM EK board.
2020-01-07 08:44:56 -05:00
Ley Foon Tan
a76b711dea arm: socfpga: agilex: Enable Agilex SoC build
Add build support for Agilex SoC.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07 14:38:34 +01:00
Andy Shevchenko
3a117e721c x86: edison: Enable DFU timeout
The stock U-Boot on Intel Edison has timeout parameter for DFU command.
Enable it here to be compatible with the original U-Boot configuration.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-07 14:37:50 +01:00
Fabio Estevam
32efcbc09f imx8mm_evk: Adjust the environment for booting a mainline kernel
Adjust the environment for booting a mainline kernel by default.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-01-07 10:26:57 +01:00
Igor Opaniuk
ebabbf1169 colibri_imx7: migrate to DM_ETH
Migrate to DM_ETH and remove hardcoded pinmux configuration.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-01-07 10:26:56 +01:00
Igor Opaniuk
a781ed271e apalis_imx6: migrate to DM_ETH
Migrate to DM_ETH and remove hardcoded pinmux configuration.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-01-07 10:26:56 +01:00
Igor Opaniuk
431cd76dd8 colibri_imx6: migrate to DM_ETH
Migrate to DM_ETH and remove hardcoded pinmux configuration.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-01-07 10:26:56 +01:00
Joris Offouga
87271ed8eb mx7dsabre: Remove warning about DM_SPI_FLASH
This defconfig doesn't need it.

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
2020-01-07 10:26:56 +01:00
Joris Offouga
80e62e3a70 mx7dsabre: Convert to distroboot support
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
2020-01-07 10:26:56 +01:00
Joris Offouga
0d52bab462 mx7dsabre: Enable DM_ETH
Also sync device tree with v5.5-rc1
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
2020-01-07 10:26:56 +01:00
Fabio Estevam
0417ef17ac mx7ulp: Add support for Embedded Artists COM board
The Embedded Artists COM board is based on NXP i.MX7ULP.

It has a BD70528 PMIC from Rohm with discrete DCDC powering option and
improved current observability (compared to the existing NXP i.MX7ULP EVK).

Add the initial support for the board.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-01-07 10:26:56 +01:00
Steffen Dirkwinkel
943be15974 imx: cx9020: use distro boot
We switch from custom boot commands relying on uEnv.txt to distro boot.
This removes the automatic fpga bitstream loading in favor of loading
bitstreams via custom bootscripts (boot.scr) or after booting the
kernel.

Acked-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
2020-01-07 10:26:56 +01:00
Steffen Dirkwinkel
dd7e7feb44 imx: cx9020: enable vidconsole by default
Acked-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
2020-01-07 10:26:56 +01:00
Steffen Dirkwinkel
ba1444eab6 imx: cx9020: migrate cx9020 to CONFIG_DM_USB
Note: gpio7_8 was never used for usb power regulator so we remove it here

Acked-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
2020-01-07 10:26:56 +01:00
Steffen Dirkwinkel
9c2b1b0f03 imx: cx9020: migrate cx9020 to CONFIG_DM_ETH
Acked-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
2020-01-07 10:26:56 +01:00
Parthiban Nallathambi
d98929d636 imx: sync with kernel device tree for Phycore SoM
Sync the Linux Kernel 5.4-rc6 device tree for Phytec Phycore
SoM and Segin board based on imx6UL and imx6ULL.

Changes includes Phytec naming convention for the devicetree files.

Signed-off-by: Parthiban Nallathambi <parthitce@gmail.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
2020-01-07 10:26:56 +01:00
Suniel Mahesh
1699f0e592 arm: imx6: cm_fx6: Enable DM SPI and SPI_FLASH, fix SPL build errors
Enable driver model for SPI and SPI_FLASH to remove the following
compile warning on CM-FX6 SOM:
===================== WARNING ======================
This board does not use CONFIG_DM_SPI_FLASH. Please update
the board to use CONFIG_SPI_FLASH before the v2019.07 release.
====================================================

This change introduced SPL build error as shown:

In file included from include/common.h:47:0,
                 from drivers/mtd/spi/sf_probe.c:10:
drivers/mtd/spi/sf_probe.c: In function 'spi_flash_std_probe':
drivers/mtd/spi/sf_probe.c:149:54: error: dereferencing pointer to incomplete type 'struct dm_spi_slave_platdata'
scripts/Makefile.build:278: recipe for target 'spl/drivers/mtd/spi/sf_probe.o' failed
make[3]: *** [spl/drivers/mtd/spi/sf_probe.o] Error 1
scripts/Makefile.build:432: recipe for target 'spl/drivers/mtd/spi' failed
make[2]: *** [spl/drivers/mtd/spi] Error 2

Disabling DM for SPI support(SPI and SF) in SPL resolves the issue.
Target was compile tested, build was clean.

Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
2020-01-07 10:26:56 +01:00
Suniel Mahesh
26d926d616 board: cm_fx6: Enable CONFIG_DM_ETH
Enable CONFIG_DM_ETH to remove compile warning on CM-FX6
SOM based target:

===================== WARNING ======================
This board does not use CONFIG_DM_ETH (Driver Model
for Ethernet drivers). Please update the board to use
CONFIG_DM_ETH before the v2020.07 release.
====================================================

Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
2020-01-07 10:26:56 +01:00
Suniel Mahesh
7f681b3d75 board: cm_fx6: Enable DM support for video, fix build error
Enable driver model for Video to remove the following
compile warning on CM-FX6 SOM based target:

===================== WARNING ======================
This board does not use CONFIG_DM_VIDEO Please update
the board to use CONFIG_DM_VIDEO before the v2019.07 release.
====================================================

This change introduced build error as shown:

LD      u-boot
drivers/built-in.o: In function ipu_displays_init'
arm-linux-ld.bfd: BFD (GNU Binutils) 2.29.1 assertion fail elf32-arm.c:9509
Makefile:1621: recipe for target 'u-boot' failed
make: *** [u-boot] Error 1

The DM converted video driver calls ipu_displays_init
in its probe, which inturn calls relevant board_video_skip.
Defining ipu_displays_init in the board file fixes build error.
Target was compile tested, build was clean.

Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
2020-01-07 10:26:56 +01:00
Claudius Heine
04886b36eb ARM: imx6: DHCOM i.MX6 PDK: Enable sysreset driver and wdt command
The SPL does not have DM enabled and therefor still needs to use the
hardware watchdog interface provided by the imx-watchdog driver.

Fixes: broken reset command after f2929d11a6 ("watchdog: imx: Use
       immediate reset bits for expire_now")

Signed-off-by: Claudius Heine <ch@denx.de>
2020-01-07 10:26:56 +01:00
Baruch Siach
eb9124f574 mx6cuboxi: enable OF_CONTROL with DM_MMC and DM_USB
Make first step in DT/DM migration. Enable OF_CONTROL only for the main
U-Boot image for now.

Remove mmc_init_main() because board_mmc_init() is not called when
DM_MMC is enabled.

DM_MMC requires DM_GPIO for card-detect to work. That in turn makes gpio
request mandatory. Add code to request/free gpios in platform code.

MMC devices are now numbered according to DT. The SD card is 1, and eMMC
is 2. Account for that in board_mmc_get_env_dev(), BOOT_TARGET_DEVICES,
and has_emmc().

DM_MMC requires BLK. However, the (BLK && !DM_USB) combination disables
USB_STORAGE. Enable DM_USB to preserve USB functionality. Add also
DM_REGULATORS for the USB power controller. This allows us to drop
board_ehci_hcd_init() and setup_usb().

Runtime selection of DT is necessary because of the i.MX6QD vs i.MX6SDL
incompatibility. DT selection does not rely on GPIOs, since DM_GPIO
depends on DT. Instead, we take one "fully featured" DT of each variant.
That should be enough to boot from both SD card and eMMC.

Since we don't select the exact DT, override the generic
show_board_info() that shows the selected DT 'model' field.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-01-07 10:26:56 +01:00
Robert Beckett
7915e150d6 board: ge: mx53ppd: use imx wdt
Enable DM imx WDT
Enable SYSRESET_WATCHDOG to maintain WDT based reset ability

Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-07 10:26:56 +01:00
Robert Beckett
d494aeca46 board: ge: bx50v3: use imx wdt
Enable DM imx WDT
Enable SYSRESET_WATCHDOG to maintain WDT based reset ability

Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-07 10:26:56 +01:00
Denis Zalevskiy
b565b18a29 board: ge: bx50v3: Enable DM for PCI and ethernet
DM for PCI pulls DM for ethernet that also needs other changes described
below to build u-boot and keep existing functionality - ability to update
MAC addresses of FEC ethernet adapter and I210 adapter connected to the
Marvell switch.

- fec_mxc driver with DM needs PHYLIB;

- configuration items are moved from ge_bx50v3.h to ge_bx50v3_defconfig;

- FEC is marked as eth0 because it is always present, so indices changed:
  I210 are still probed in the same order;

- board_eth_init() was used by legacy ethernet, setup for enet iomux and
  pcie is moved to the board_late_init();

- pci_init() is called from the board_late_init() to initiate PCI bus
  probing, so I210 devices are propagated to the device tree;

Signed-off-by: Denis Zalevskiy <denis.zalevskiy@ge.com>
[Describe PHY reset in device tree]
Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-07 10:26:56 +01:00
Denis Zalevskiy
833dd6444b configs: ppd: DM for USB and regulators PPD
DM should be used for USB since 2019.07, it also requires DM for
regulators.

Signed-off-by: Denis Zalevskiy <denis.zalevskiy@ge.com>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-07 10:26:56 +01:00