boards: amlogic: add Khadas VIM3L support

Khadas VIM3L uses the same board layout as VIM3, but with an S905D3 chip
instead of A311D. Board config is derived from khadas-vim3_defconfig and
sei610_defconfig. README is based on README.khadas-vim3; the difference
is that VIM3L uses FIP files from the g12a folder in vendor sources not
the g12b folder.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: added vim3l readme into w400 MAINTAINERS]
This commit is contained in:
Christian Hewitt 2019-12-11 13:20:54 +04:00 committed by Neil Armstrong
parent b9d5480fdb
commit 9c84c21009
3 changed files with 195 additions and 0 deletions

View File

@ -4,4 +4,5 @@ S: Maintained
L: u-boot-amlogic@groups.io
F: board/amlogic/w400/
F: configs/khadas-vim3_defconfig
F: configs/khadas-vim3l_defconfig
F: configs/odroid-n2_defconfig

View File

@ -0,0 +1,132 @@
U-Boot for Khadas VIM3L
=======================
Khadas VIM3L is a single board computer manufactured by Shenzhen Wesion
Technology Co., Ltd. with the following specifications:
- Amlogic S905D3 Arm Cortex-A55 quad-core SoC
- 2GB LPDDR4 SDRAM
- Gigabit Ethernet
- HDMI 2.1 display
- 40-pin GPIO header
- 1 x USB 3.0 Host, 1 x USB 2.0 Host
- eMMC, microSD
- M.2
- Infrared receiver
Schematics are available on the manufacturer website.
Currently the U-Boot port supports the following devices:
- serial
- eMMC, microSD
- Ethernet
- I2C
- Regulators
- Reset controller
- Clock controller
- ADC
u-boot compilation
==================
> export ARCH=arm
> export CROSS_COMPILE=aarch64-none-elf-
> make khadas-vim3l_defconfig
> make
Image creation
==============
Amlogic doesn't provide sources for the firmware and for tools needed
to create the bootloader image, so it is necessary to obtain them from
the git tree published by the board vendor:
> wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
> wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
> tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
> tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
> export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
> DIR=vim3l-u-boot
> git clone --depth 1 \
https://github.com/khadas/u-boot.git -b khadas-vims-v2015.01 \
$DIR
> cd vim3l-u-boot
> make kvim3l_defconfig
> make
> export UBOOTDIR=$PWD
Go back to mainline U-Boot source tree then :
> mkdir fip
> cp $UBOOTDIR/build/scp_task/bl301.bin fip/
> cp $UBOOTDIR/build/board/khadas/kvim3l/firmware/acs.bin fip/
> cp $UBOOTDIR/fip/g12a/bl2.bin fip/
> cp $UBOOTDIR/fip/g12a/bl30.bin fip/
> cp $UBOOTDIR/fip/g12a/bl31.img fip/
> cp $UBOOTDIR/fip/g12a/ddr3_1d.fw fip/
> cp $UBOOTDIR/fip/g12a/ddr4_1d.fw fip/
> cp $UBOOTDIR/fip/g12a/ddr4_2d.fw fip/
> cp $UBOOTDIR/fip/g12a/diag_lpddr4.fw fip/
> cp $UBOOTDIR/fip/g12a/lpddr3_1d.fw fip/
> cp $UBOOTDIR/fip/g12a/lpddr4_1d.fw fip/
> cp $UBOOTDIR/fip/g12a/lpddr4_2d.fw fip/
> cp $UBOOTDIR/fip/g12a/piei.fw fip/
> cp $UBOOTDIR/fip/g12a/aml_ddr.fw fip/
> cp u-boot.bin fip/bl33.bin
> sh fip/blx_fix.sh \
fip/bl30.bin \
fip/zero_tmp \
fip/bl30_zero.bin \
fip/bl301.bin \
fip/bl301_zero.bin \
fip/bl30_new.bin \
bl30
> sh fip/blx_fix.sh \
fip/bl2.bin \
fip/zero_tmp \
fip/bl2_zero.bin \
fip/acs.bin \
fip/bl21_zero.bin \
fip/bl2_new.bin \
bl2
> $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \
--output fip/bl30_new.bin.g12a.enc \
--level v3
> $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \
--output fip/bl30_new.bin.enc \
--level v3 --type bl30
> $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \
--output fip/bl31.img.enc \
--level v3 --type bl31
> $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \
--output fip/bl33.bin.enc \
--level v3 --type bl33 --compress lz4
> $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \
--output fip/bl2.n.bin.sig
> $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bootmk \
--output fip/u-boot.bin \
--bl2 fip/bl2.n.bin.sig \
--bl30 fip/bl30_new.bin.enc \
--bl31 fip/bl31.img.enc \
--bl33 fip/bl33.bin.enc \
--ddrfw1 fip/ddr4_1d.fw \
--ddrfw2 fip/ddr4_2d.fw \
--ddrfw3 fip/ddr3_1d.fw \
--ddrfw4 fip/piei.fw \
--ddrfw5 fip/lpddr4_1d.fw \
--ddrfw6 fip/lpddr4_2d.fw \
--ddrfw7 fip/diag_lpddr4.fw \
--ddrfw8 fip/aml_ddr.fw \
--ddrfw9 fip/lpddr3_1d.fw \
--level v3
and then write the image to SD with:
> DEV=/dev/your_sd_device
> dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
> dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444

View File

@ -0,0 +1,62 @@
CONFIG_ARM=y
CONFIG_SYS_BOARD="w400"
CONFIG_ARCH_MESON=y
CONFIG_SYS_TEXT_BASE=0x01000000
CONFIG_MESON_G12A=y
CONFIG_ENV_SIZE=0x2000
CONFIG_NR_DRAM_BANKS=1
CONFIG_DEBUG_UART_BASE=0xff803000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" khadas-vim3l"
CONFIG_DEBUG_UART=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_MISC_INIT_R=y
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_IMI is not set
CONFIG_CMD_GPIO=y
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_REGULATOR=y
CONFIG_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="meson-sm1-khadas-vim3l"
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM_GPIO=y
CONFIG_DM_MMC=y
CONFIG_MMC_MESON_GX=y
CONFIG_PHY_REALTEK=y
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_MESON_G12A_USB_PHY=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_MESON_G12A=y
CONFIG_POWER_DOMAIN=y
CONFIG_MESON_EE_POWER_DOMAIN=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_RESET=y
CONFIG_DEBUG_UART_MESON=y
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_DEBUG_UART_SKIP_INIT=y
CONFIG_MESON_SERIAL=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_GADGET is not set
CONFIG_USB_DWC3_MESON_G12A=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e
CONFIG_USB_GADGET_PRODUCT_NUM=0xfada
CONFIG_USB_GADGET_DWC2_OTG=y
CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_DM_VIDEO=y
CONFIG_VIDEO_MESON=y
CONFIG_VIDEO_DT_SIMPLEFB=y
CONFIG_OF_LIBFDT_OVERLAY=y