Commit Graph

43880 Commits

Author SHA1 Message Date
Bin Meng
6702488cfa x86: baytrail: Remove "serial-debug-port-*" settings
"serial-debug-port-address" and "serial-debug-port-type" settings
are actually reserved in the FSP UPD data structure. Remove them.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-05 08:55:22 +08:00
Bin Meng
455a5a8086 x86: baytrail: Change "fsp, mrc-init-tseg-size" default value to 1
The default value of "fsp,mrc-init-tseg-size" should be 1 (1MB) per
FSP default settings. 0 is not valid.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-05 08:55:22 +08:00
Tom Rini
5cafcbab58 Merge git://git.denx.de/u-boot-net 2017-06-03 18:05:28 -04:00
Tom Rini
541f538f4c Merge git://git.denx.de/u-boot-fsl-qoriq 2017-06-03 18:05:04 -04:00
Tom Rini
b07d044d5b Merge git://git.denx.de/u-boot-sunxi 2017-06-03 18:04:54 -04:00
Tom Rini
91d27a17c6 Kconfig: Migrate FS_FAT / FAT_WRITE
Now that these symbols are in Kconfig, migrate all users.  Use imply on
a number of platforms that default to having this enabled.  As part of
this we must migrate some straglers for CMD_FAT and DOS_PARTITION.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-03 17:55:34 -04:00
Sekhar Nori
4a72d8dcc9 board: ti: enable support for writing to fat partition
Enable support for writing to FAT partitions on
TI's boards.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-06-03 17:55:19 -04:00
Sekhar Nori
0dbb9a93c3 config_fallbacks: add additional fallbacks for fat filesystem
Add fallbacks needed to keep all boards building
while they are migrated to use Kconfig symbols
instead of defines in <board>_config.h files for
FAT filesystem.

These should eventually go away once Kconfig select
or imply statements are put in place and duplicated
defines in <board>_config.h removed.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
[trini: Update logic since CMD_FAT / CONFIG_SPL_FAT_SUPPORT are
        selecting FS_FAT]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-03 17:55:18 -04:00
Sekhar Nori
391b037ee6 configs: k2g_evm: make sure config fallbacks take effect
Since config fallbacks contained in include/config_fallbacks.h
come into k2g_evm.h file through ti_armv7_keystone2.h, it should
be the last file included.

Without this, #define of FAT_WRITE when environment is in FAT
does not happen as the environment location is decided later
in the file.

Similar issues can come with other config fallbacks implemented.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-06-03 17:55:18 -04:00
Sekhar Nori
ae8733910b configs: k2*_evm: let each board decide env location
Not all TI Keystone2 EVMs want environment in NAND flash.
K2G EVM which has an MMC/SD slot, keep environment in a
FAT partition on SD card.

Since ti_armv7_keystone2.h defines environment is in NAND,
boards which do not follow that have to #undef'ine that
configuration. This leads to ugly ordering issues around
where exactly the include of ti_armv7_keystone2.h can come
in within the k2*_evm.h files.

Move environment location to config file of each board.
This should make it easy to change it for any one board
without affecting all other boards.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-06-03 17:55:18 -04:00
Sekhar Nori
eedfb89e61 fs: fat: add kbuild configuration support
Add Kconfig symbols for various configurations
supported by FAT filesystem support code.

CONFIG_SUPPORT_VFAT has been left out since its
force enabled in include/fat.h and probably
should get removed at some point.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
[trini: add select FS_FAT for CMD_FAT and SPL_FAT_SUPPORT]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-03 17:55:16 -04:00
Paul Burton
2303bff7d5 net: pch_gbe: Add cache maintenance
On MIPS systems DMA isn't coherent with the CPU caches unless an IOCU is
present. When there is no IOCU we need to writeback or invalidate the
data caches at appropriate points. Perform this cache maintenance in
the pch_gbe driver which is used on the MIPS Boston development board.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-06-02 14:44:20 -05:00
Paul Burton
52e727c8eb net: pch_gbe: CPU accessible addresses are virtual
Use the virt_to_bus & bus_to_virt functions rather than phys_to_bus &
bus_to_phys, since the addresses accessed by the CPU will be virtual
rather than physical. On MIPS physical & virtual addresses differ as we
use virtual addresses in kseg0, and attempting to use physical addresses
directly caused problems as they're in the user segment which would be
mapped via the uninitialised TLB.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-06-02 14:44:20 -05:00
Paul Burton
db225f1131 net: pch_gbe: Fix rx descriptor buffer addresses
The loop to set up buffer addresses in rx descriptors always operated on
descriptor 0, rather than on each descriptor sequentially. Fix this in
order to setup correct buffer addresses for each descriptor.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-06-02 14:44:20 -05:00
Paul Burton
43979cbacb net: pch_gbe: Reset during probe
Using the EG20T gigabit ethernet controller on the MIPS Boston board, we
find that we have to reset the controller in order for the RGMII link to
the PHY to become functional. Without doing so we constantly time out in
pch_gbe_mdio_ready.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-06-02 14:44:20 -05:00
Siva Durga Prasad Paladugu
f0b94c4bcd net: zynq_gem: Dont flush dummy descriptors
Dont flush dummy descriptors as they are already
allocated from a region with dcache off. Tested
this on Zynq(zc702) and ZynqMP(zcu102) boards.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-06-02 14:44:20 -05:00
Siva Durga Prasad Paladugu
dea004e41a net: zynq_gem: Use wait_for_bit with non breakable
Use wait_for_bit to be non breakable as using it with
breakable causes issue of un interruptible auto negotiation.
This is due to the ctrlc pressed will taken for wait_for_bit()
abort during phy_read() and hence not coming out of
auto negotiation.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-06-02 14:44:20 -05:00
Phil Edworthy
68e6ecadc5 net: phy: marvell 88e151x: Fix handling of RGMII interface types
The 88E1518 code is programming the wrong registers for rgmii-id,
rgmii-txid and rgmii-rxid interfaces.

Since the PHY defaults to rgmii-id, it would appear that the code
was previously only used with sgmii and rgmii-id interfaces.

Tested on 88E1512 PHY in rgmii-id mode which is from the same family
as 88E1518.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-06-02 14:44:19 -05:00
xypron.glpk@gmx.de
c08248d601 net: core: avoid possible NULL pointer dereference
Checking if dev is NULL after dereferencing it does not make sense.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-06-02 14:44:19 -05:00
Sekhar Nori
96d1d84c79 drivers: net: cpsw: abort init() on aneg timeout
Abort CPSW driver init when auto-negotiation of link
times out. Currently, the code ignores return status
of phy_startup(), and goes ahead with network operation
(like DHCP) even though the link may be down.

Instead, abort init process if link is down or if there
is another error, so phy_startup() can easily be retried
again. This also helps quick fallback to next network interface
(like USB RNDIS) without inordinate delay.

Tested on AM571x IDK and AM335x BeagleBone black.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-06-02 14:44:19 -05:00
Wenyou Yang
6de046eaa7 net: macb: Fix GMAC not work when enable DM_ETH
Always search the PHY to determine the macb->phy_addr before using
the PHY to fix "No PHY present" error.

Fix the wrong test of the GMAC's phy interface mode, it should be
PHY_INTERFACE_MODE_RGMII.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-06-02 14:44:19 -05:00
Stefan Chulski
e09d0c8314 net: mvpp2.c: Enable 10G support for port 0 (SFI)
This patch fixes some remaining issues in the mvpp2 driver for the 10GB
support on port 0. These changes are:

- Incorrect PCS configuration
- Skip PHY configuration when no PHY is connected
- Skip GMAC configurations if 10G SFI mode set

Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Kostya Porotchkin <kostap@marvell.com>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-06-02 14:44:19 -05:00
Madalin Bucur
cc1aa218f5 armv8/ls1046a: RGMII PHY requires internal delay on Tx
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-06-02 14:44:18 -05:00
Madalin Bucur
5a78a472f6 armv8/ls1043a: RGMII PHY requires internal delay on Tx
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-06-02 14:44:18 -05:00
Olliver Schinagl
b233089787 net: zynq_gem: Do not return -ENOSYS on success
The .read_rom_hwaddr net_ops hook does not check the return value, which
is why it was never caught that we are currently returning 0 if the
read_rom_hwaddr function return -ENOSYS and -ENOSYS otherwise.

In this case we can simplify this by just returning the result of the
function.

Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
2017-06-02 14:44:18 -05:00
Jacob Chen
6ec922fae2 net: designware: Add phy supply support
Some board need a regulator for gmac phy, so add this code to handle it.
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-06-02 14:44:18 -05:00
Philipp Tomsich
449ea2cd0d net: Kconfig:make PHY_GIGE and individual Micrel PHYs selectable
This change migrate the following configuration options for Kconfig:
 * PHY_GIGE, indicates that a controller (with an appropriate PHY) is
   Gigabit capable and enables extra support in the miiutil for
   parsing the status of Gigabit PHYs
 * adds configuration options for Micrel KSZ9021 and KSZ9031 GbE PHYs,
   which previously had to enabled through a board-specific config file

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-06-02 14:44:18 -05:00
Jagan Teki
868e37159e sun50i: h5: Add initial Orangepi Prime support
Orangepi Prime is an open-source single-board computer
using the Allwinner h5 SOC.

H5 Orangepi Prime has
- Quad-core Cortex-A53
- 2GB DDR3
- Debug TTL UART
- 1000M/100M Ethernet RJ45
- Three USB 2.0
- HDMI
- Audio and MIC
- Wifi + BT
- IR receiver
- HDMI
- Wifi + BT

Boot from MMC:
-------------
U-Boot SPL 2017.05-00662-ga3f4c05-dirty (May 25 2017 - 13:30:14)
DRAM: 2048 MiB
Trying to boot from MMC1
NOTICE:  BL3-1: Running on H5 (1718) in SRAM A2 (@0x44000)
NOTICE:  Configuring SPC Controller
NOTICE:  BL3-1: v1.0(debug):aa75c8d
NOTICE:  BL3-1: Built : 18:28:27, May 24 2017
INFO:    BL3-1: Initializing runtime services
INFO:    BL3-1: Preparing for EL3 exit to normal world
INFO:    BL3-1: Next image address: 0x4a000000, SPSR: 0x3c9

U-Boot 2017.05-00662-ga3f4c05-dirty (May 25 2017 - 13:30:14 +0000) Allwinner Technology

CPU:   Allwinner H5 (SUN50I)
Model: OrangePi Prime
DRAM:  2 GiB
MMC:   SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   phy interface7
eth0: ethernet@1c30000
starting USB...
USB0:   USB EHCI 1.00
USB1:   USB OHCI 1.0
scanning bus 0 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-06-02 13:28:07 +00:00
York Sun
8d75d52878 armv8: ls1046ardb: Enable loading PPA during SPL stage for SD boot
Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-01 19:57:24 -07:00
York Sun
b3a860acef armv8: ls1046a: Enable spl_board_init() function
CONFIG_SPL_BOARD_INIT is used for SPL boot. It is only enabled for
secure boot at this moment. Enable it in defconfig files for SPL
build.

Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-01 19:57:24 -07:00
York Sun
f24c785a35 armv8: ls1043ardb: Enable loading PPA during SPL stage for SD boot
Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-01 19:57:24 -07:00
York Sun
8e59778bec armv8: layerscape: Enabling loading PPA during SPL stage
Loading PPA in SPL puts the rest of U-Boot (including RAM version
loaded later) in EL2 with MMU and cache enabled. Once PPA is loaded,
PSCI is available.

Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-01 19:57:24 -07:00
York Sun
399e2bb60c armv8: layerscape: Make U-Boot EL2 safe
When U-Boot boots from EL2, skip some lowlevel init code requiring
EL3, including CCI-400/CCN-504, trust zone, GIC, etc. These
initialization tasks are carried out before U-Boot runs. This applies
to the RAM version image used for SPL boot if PPA is loaded first.

Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-01 19:57:24 -07:00
Santan Kumar
1f55a93802 armv8: ls2080aqds: Add support for SD boot
Signed-off-by: Santan Kumar <santan.kumar@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-06-01 19:57:17 -07:00
Santan Kumar
faed6bde11 armv8: ls2080a: Reorganise NAND_BOOT code in config flag
Add CONFIG_NAND_BOOT config flag to organise
NAND_BOOT specific code in config flag like
-nand-boot specfic errata errata_rcw_src()
-CONFIG_SYS_NAND_U_BOOT_DST,etc

Signed-off-by: Santan Kumar <santan.kumar@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-06-01 19:57:07 -07:00
Zhao Qiang
5aa03ddd7f QE: add QE support on SD boot
modify u_qe_init to upload QE firmware from SD card when it is SD
boot

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-06-01 19:56:54 -07:00
Bogdan Purcareata
1161dbcc0a drivers: net: fsl-mc: Include MAC addr fixup to DPL
Previous to MC v10.x, port mac address was specified via DPL. Since
newer MC versions are compatible with old style DPLs, make the u-boot
env mac addresses visible there. This applies only to DPLs that have
an older version.

DPLs use 32 bit values for specifying MAC addresses. U-boot
environment variables take precedence over the MAC addresses already
visible in the DPL/DPC.

Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
Signed-off-by: Heinz Wrobel <heinz.wrobel@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-06-01 19:56:24 -07:00
Bogdan Purcareata
33a8991a87 drivers: net: fsl-mc: Link MC boot to PHY_RESET_R
DPAA2 platforms boot the Management Complex based on the u-boot env
variable "mcinitcmd". Instead of doing this step on each platform
individually, define a single mc_env_boot function in the MC driver,
since it's semantically tied to it.

Call the function in a per-board reset_phy hook, as it gets called at a
later moment, when all board PHY devices have been initialized.

Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
Signed-off-by: Heinz Wrobel <heinz.wrobel@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-06-01 19:55:50 -07:00
Jagan Teki
f333973340 arm64: dts: sun50i: h5: orangepi-pc2: Use GPIO flag binding macro
Instead of defining numerical value on GPIO flag
better to use existing binding macro.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-06-01 14:42:08 +00:00
Jagan Teki
702a3e579b arm64: dts: sun50i: Add sun50i-h5.dtsi
The Allwinner H5 SoC is pin-compatible to the H3 SoC,
but uses Cortex-A53 cores instead.

So move the shared cpu based and peripherals nodes into
sun50i-h5.dtsi so, that it can shared among the sun50i-h5
board dts files.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-06-01 14:35:23 +00:00
Simon Glass
46bac66b20 sandbox: Move to use live tree
This updates sandbox to use a live device tree. This means that after
relocation (from board_init_r() onwards) it no-longer uses flat device
tree.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:17 -06:00
Simon Glass
04048d58a8 dm: gpio: power: Convert pm8916 drivers to livetree
This PMIC driver (power and GPIO) is used by the sandbox SPMI tests.
Update the drivers to support a live device tree so that the tests pass.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:17 -06:00
Simon Glass
fe3c0b5b93 dm: test: Fix nit with position of backslash
Line up this backslash with all the others.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:17 -06:00
Simon Glass
03753c9a7b dm: sandbox: sysreset: Convert driver to livetree
Update this driver to support a live device tree.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:17 -06:00
Simon Glass
a11817999f dm: sandbox: spi: Convert driver to support livetree
Update this driver to support a live device tree.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:16 -06:00
Simon Glass
656f29d1ca dm: spi-flash: Convert uclass to livetree
Update the SPI flash uclass to support a live device tree.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:16 -06:00
Simon Glass
2ceb6484c2 dm: sandbox: i2c_rtc: Drop fdtdec.h header
This is not needed in this driver. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:16 -06:00
Simon Glass
aabf79929e dm: sandbox: i2c: Drop fdtdec.h header
This is not needed in this driver. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:16 -06:00
Simon Glass
279e26f5a3 dm: spi: Convert uclass to livetree
Update the SPI uclass to support a live device tree. Also adjust
spi_slave_ofdata_to_platdata() to accept a device instead of a blob and
offset.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:16 -06:00
Simon Glass
8327d41b19 cros_ec: Update the cros_ec keyboard driver to livetree
Update this driver and key_matrix to support a live device tree.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:16 -06:00