QE: add QE support on SD boot

modify u_qe_init to upload QE firmware from SD card when it is SD
boot

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
This commit is contained in:
Zhao Qiang 2017-05-25 09:47:40 +08:00 committed by York Sun
parent 1161dbcc0a
commit 5aa03ddd7f
5 changed files with 40 additions and 4 deletions

View File

@ -8,6 +8,7 @@
*/
#include <common.h>
#include <malloc.h>
#include <command.h>
#include <linux/errno.h>
#include <asm/io.h>
@ -17,6 +18,10 @@
#include <asm/arch/immap_ls102xa.h>
#endif
#ifdef CONFIG_SYS_QE_FMAN_FW_IN_MMC
#include <mmc.h>
#endif
#define MPC85xx_DEVDISR_QE_DISABLE 0x1
qe_map_t *qe_immr = NULL;
@ -194,8 +199,37 @@ void u_qe_init(void)
{
qe_immr = (qe_map_t *)(CONFIG_SYS_IMMR + QE_IMMR_OFFSET);
u_qe_upload_firmware((const void *)CONFIG_SYS_QE_FW_ADDR);
void *addr = (void *)CONFIG_SYS_QE_FW_ADDR;
#ifdef CONFIG_SYS_QE_FMAN_FW_IN_MMC
int dev = CONFIG_SYS_MMC_ENV_DEV;
u32 cnt = CONFIG_SYS_QE_FMAN_FW_LENGTH / 512;
u32 blk = CONFIG_SYS_QE_FW_ADDR / 512;
if (mmc_initialize(gd->bd)) {
printf("%s: mmc_initialize() failed\n", __func__);
return;
}
addr = malloc(CONFIG_SYS_QE_FMAN_FW_LENGTH);
struct mmc *mmc = find_mmc_device(CONFIG_SYS_MMC_ENV_DEV);
if (!mmc) {
free(addr);
printf("\nMMC cannot find device for ucode\n");
} else {
printf("\nMMC read: dev # %u, block # %u, count %u ...\n",
dev, blk, cnt);
mmc_init(mmc);
(void)mmc->block_dev.block_read(&mmc->block_dev, blk, cnt,
addr);
/* flush cache after read */
flush_cache((ulong)addr, cnt * 512);
}
#endif
u_qe_upload_firmware(addr);
out_be32(&qe_immr->iram.iready, QE_IRAM_READY);
#ifdef CONFIG_SYS_QE_FMAN_FW_IN_MMC
free(addr);
#endif
}
#endif

View File

@ -125,6 +125,7 @@ unsigned long get_board_ddr_clk(void);
#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
!defined(CONFIG_QSPI_BOOT)
#define CONFIG_U_QE
#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
#endif
/*

View File

@ -149,6 +149,7 @@
#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
!defined(CONFIG_QSPI_BOOT)
#define CONFIG_U_QE
#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
#endif
/*

View File

@ -216,6 +216,7 @@
*/
#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x4800)
#define CONFIG_SYS_QE_FW_ADDR (512 * 0x4a08)
#elif defined(CONFIG_QSPI_BOOT)
#define CONFIG_SYS_QE_FW_IN_SPIFLASH
#define CONFIG_SYS_FMAN_FW_ADDR 0x40900000
@ -227,6 +228,7 @@
#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
/* FMan fireware Pre-load address */
#define CONFIG_SYS_FMAN_FW_ADDR 0x60900000
#define CONFIG_SYS_QE_FW_ADDR 0x60940000
#endif
#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)

View File

@ -280,11 +280,9 @@
/* QE */
#ifndef SPL_NO_QE
#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
!defined(CONFIG_QSPI_BOOT)
#if !defined(CONFIG_NAND_BOOT) && !defined(CONFIG_QSPI_BOOT)
#define CONFIG_U_QE
#endif
#define CONFIG_SYS_QE_FW_ADDR 0x60940000
#endif
/* USB */