Commit Graph

3999 Commits

Author SHA1 Message Date
Tom Rini
0a3d59e010 Xilinx changes for v2019.01
microblaze:
 - Use default functions for memory decoding
 - Showing model from DT
 
 zynq:
 - Fix spi flash DTs
 - Fix zynq_help_text with CONFIG_SYS_LONGHELP
 - Tune cse/mini configurations
 - Enabling cse/mini testing with current targets
 
 zynqmp:
 - Enable gzip SPL support
 - Fix chip detection logic
 - Tune mini configurations
 - DT fixes(spi-flash, models, clocks, etc)
 - Add support for OF_SEPARATE configurations
 - Enabling mini testing with current targets
 - Add mini mtest configuration
 - Some minor config setting
 
 nand:
 - arasan: Add subpage configuration
 
 net:
 - gem: Add 64bit DMA support
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlwFUAkACgkQykllyylKDCHtIACeO2G+jfSPxIjsyuPWbRup4e+A
 H5UAn3knKDNJ3VVidqO1C5o8Ye5JePZF
 =lW3g
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2019.01' of git://git.denx.de/u-boot-microblaze

Xilinx changes for v2019.01

microblaze:
- Use default functions for memory decoding
- Showing model from DT

zynq:
- Fix spi flash DTs
- Fix zynq_help_text with CONFIG_SYS_LONGHELP
- Tune cse/mini configurations
- Enabling cse/mini testing with current targets

zynqmp:
- Enable gzip SPL support
- Fix chip detection logic
- Tune mini configurations
- DT fixes(spi-flash, models, clocks, etc)
- Add support for OF_SEPARATE configurations
- Enabling mini testing with current targets
- Add mini mtest configuration
- Some minor config setting

nand:
- arasan: Add subpage configuration

net:
- gem: Add 64bit DMA support
2018-12-03 19:30:54 -05:00
Tom Rini
9981c60ef5 Patch queue for rpi - 2018-12-03
A few Raspberry Pi specific changes this time:
 
   - Allow 2nd MMC device
   - Support RPi 3 Model A+
   - Allow UUID to find filesystem
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJcBYNQAAoJECszeR4D/txgpdAQAL+JkA5pJeX2bSJy10Y1jTQa
 uD9R5uvRFmduXLMYgZPzc9FCOTbsO5DJvvERV+JidHDeNYIFVAuPo494fUZL3JGa
 Q+zUEDkO8lf2ybJCX5lg6EEZ2O/xzCZJqHs+cV5iPWJ//y0Hx6RuhfS0DGbPQuwN
 e7tlOZg178ZzXSmsNdqKGhNUgSXUTHKaJ5H02VJZ61oUo9/4Zmpsoc3flCrYDjme
 DAeVqDMex+UyqxfBrxMdvVUtdovMV6coF/hbZiHHogvjwNZCmBri0wmFaCmzheSj
 DCz3ec0MxdT3lM2n4otAWiB1x/UY8cwCiWkSzRlFCUNzlvUxVddWgghoH0uQYvzh
 u35EMmNPM4wV6J3RjS+klQyD5tSLoUG5m4DRUDX1KKhE3MFTnx89tTf7n4++/5bk
 Hke3p1KLDnYCvEffFAu/PAeKMpLFTAxZTZm5Nog/EO5dFV2M3NeS2GpAbXXQep3r
 0WfflWrvjjG7CnnDDWMxMxYSqNv/tC9gqTeML1dOt4P275s1NyDkFj0OebjoVoiI
 fnh3DALF4AMP2mDLrFFvoYP7LptSb/TiidH3IT/AwfjFiHGicVDufBqfUObfPKNE
 oUqkKzdKnuZ9Nq5HN9OuAxM4SkSKuXVJpGXef7yJ+BUrQylPjTCpOtxtRVpIumvK
 +vIMVysbLz0EqpuV8i2P
 =W6tE
 -----END PGP SIGNATURE-----

Merge tag 'signed-rpi-next' of git://github.com/agraf/u-boot

Patch queue for rpi - 2018-12-03

A few Raspberry Pi specific changes this time:

  - Allow 2nd MMC device
  - Support RPi 3 Model A+
  - Allow UUID to find filesystem
2018-12-03 17:52:53 -05:00
Tom Rini
f388e3bed7 Patch queue for efi - 2018-12-03
This release is fully packed with lots of glorious improvements in UEFI
 land again!
 
   - Make PE images more standards compliant
   - Improve sandbox support
   - Improve correctness
   - Fix RISC-V execution on virt model
   - Honor board defined top of ram (fixes a few boards)
   - Imply DM USB access when distro boot is available
   - Code cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJcBYKAAAoJECszeR4D/txgBgwQALmYioI67R5/Iizpv7bg+rIQ
 0TyPKZHmfHtVjGHd5X4X+9NBsoaSKqGnoI12bJ+V9hIMuiu5qFKyM3icTOOJ6LI6
 wggnvMWZl5nfZmdEgETHTmaZkQZzKwhzbftGlGf2j19FdDk1OOI7hRNLeaIZUTv0
 VHiUV68PP/1Of1y7iqB5jij1wTUHWlCufKjGXELP0bAXx86/tecgCuvjBihXizz/
 sMsCxEF8++pb5l/l4yFEkKd5rr5D/ZkKMLR4KniZVq2qP1S4calolP14ykHN+a/l
 uKP4e4GDuYyrgXXTNRFhVTlaAn18bmvxH4ialnpYVZKRtfsdHPHQXfqmgf8ZgJPE
 JK3mmG6eLCbBPeND2Yz3b7G/Ec04z+RJXx0hriyLdejLgp5jM9SBtygiz6FmQLpQ
 VfDJNEWV7ot6Ejou55O0d9u5ATF0jAd4tikmsrStWWZOVHvie6nG0wFYiRxnWCKP
 sid0p7lWSUKEl0sAvA0LglNMzd4tCAq7vtkfLj/BVrDc9Jpir9CVJ13ppXIGk1HC
 YIGWLo0uXAGC9wgRE7ZgGCKtQ6VFZRbSiJQOowi4MrHzHXH218oSNz2w25tAVTBw
 le2WbxlGNYhV1xnoWMks1GTdWGQDCXdfBAhfzRIvQq2kz4z9V8hzpnVDIk2ZL3L1
 o3nqUatR0ZVXPcinf+Ke
 =6o9t
 -----END PGP SIGNATURE-----

Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot

Patch queue for efi - 2018-12-03

This release is fully packed with lots of glorious improvements in UEFI
land again!

  - Make PE images more standards compliant
  - Improve sandbox support
  - Improve correctness
  - Fix RISC-V execution on virt model
  - Honor board defined top of ram (fixes a few boards)
  - Imply DM USB access when distro boot is available
  - Code cleanups
2018-12-03 17:52:40 -05:00
Tom Rini
ec0d0d8742 Merge branch 'master' of git://git.denx.de/u-boot-sh
- MMC fixes for R-Car Gen3
2018-12-03 17:51:45 -05:00
Christophe Leroy
a8b8645fa9 board: MCR3000: migrate to DM_SERIAL
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-12-03 10:44:10 -05:00
Christophe Leroy
4c4ca6cdd5 board: MCR3000: use new DM watchdog
This patch switches MCR3000 board to the new DM watchdog.

The change in u-boot.lds is because MCR3000.o grows a bit
with this patch and doesn't fit anymore below env_offset on
some versions of GCC.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-12-03 10:44:10 -05:00
Christophe Leroy
f55db0afa2 board: MCR3000: Activate CONFIG_DM and CONFIG_OF_CONTROL
Add mcr3000 device tree and activate CONFIG_DM and CONFIG_OF_CONTROL

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-12-03 10:44:10 -05:00
Philippe Reynes
b0ec829978 configs: sandbox: enable padding pss for rsa signature
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-03 10:44:10 -05:00
Lukasz Majewski
d27db67e6b Kconfig: Migrate CONFIG_RTC_M41T62 define to Kconfig
This patch moves the RTC M41T62 config define to Kconfig.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-03 10:44:10 -05:00
Yegor Yefremov
8ce7f2c115 arm: baltos: migrate Ethernet PHYs configuration to Kconfig
Remove CONFIG_PHY_ATHEROS and CONFIG_PHY_SMSC from defconfig
and select them in Kconfig.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-03 10:44:10 -05:00
Yegor Yefremov
1abff55a19 arm: baltos: move CONFIG_SYS_NAND_U_BOOT_OFFS to defconfig
Also get rid of CONFIG_SYS_NAND_SPL_KERNEL_OFFS as SPL_OS_BOOT
feature won't be used.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-03 10:44:10 -05:00
Yegor Yefremov
67c145a836 arm: baltos: move the board to CONFIG_BLK
Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-03 10:44:10 -05:00
T Karthik Reddy
332d185c37 arm64: zynqmp: Add new header file for zcu104 RevC
Created a new header file for zcu104 RevC board and added below
configurations to use MAC address from EEPROM.
	CONFIG_ZYNQ_GEM_EEPROM_ADDR
	CONFIG_ZYNQ_EEPROM_BUS
Added CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20 to
xilinx_zynqmp_zcu104_revC_defconfig

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-12-03 15:21:56 +01:00
Marek Vasut
8e6442e3cd ARM: rmobile: Enable MMC HS400 on Salvator-X, ULCB, Ebisu
Enable the HS400 support code on H3, M3W, M3N Salvator-X(S)
and ULCB boards as well as E3 Ebisu board.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-12-03 12:51:17 +01:00
Otavio Salvador
11e10bfcec ARM: rpi_*_defconfig: Add support to find UUID for filesystem
The most generic way of having a stable boot behavior is to rely on
UUID instead of device names for root partition, so the order of
probing does not cause issues with booting.

This enables the `CMD_FS_UUID` for following defconfig files:

 - rpi_0_w_defconfig
 - rpi_2_defconfig
 - rpi_3_32b_defconfig
 - rpi_3_defconfig
 - rpi_defconfig

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02 23:00:02 +01:00
Heinrich Schuchardt
3d05c38460 efi_loader: unset CONFIG_EFI_LOADER on vf610twr
vf610twr_defconfig and vf610twr_nand_defconfig suffer from tight memory
restrictions. Disable CONFIG_EFI_LOADER for these boards.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02 21:59:36 +01:00
Tom Rini
c1d6e0bbfd Improvements:
- RK3188 USB-UART functionality
 - errors triggering a hard-stop in SPL on the RK3399 are reported
 - Rockchip RV1108 (SoC) support
 - MicroCrystal RV3029 (RTC) DM driver
 
 Fixes:
 - RK3188 early UART setup
 - limit SD-card frequency to 40MHz on the RK3399-Q7
 - MIPI fixes
 - RK3399 CPUB clock initialisation
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJcAab4AAoJECaAFcEOcohNx8gH/0OuW443gsA8Ty0rXpCvbzSi
 UejfBfqljX4tYcUrgABVdMd2WdUyQ6rSoVgnX6mvfToCxd51L2CQiimrTJRQp/ZQ
 yCrwC8iFYwgmyM/0UnnjRa03WJvYBi3McWWIxQy7ZywQcZkdIuyn6t5AbcRppGMF
 67G0ft9KRwB+dMcgdRuikDThZRhAWZ30MdY4LFZvyGWupuv/mdpyYhjHYyv05CVf
 BvaUqRFkt86GBAW7Hq+OahH1t/xuZBcPJdt8GC40Blgfmle2uvZOIpoSEezVwFXm
 qKSj5FSSVQ9XtMeWwWvHLUxKSua0pIX5d7HmK9WqcsUIePDbzth8i+/BdA+5AD4=
 =EYJx
 -----END PGP SIGNATURE-----

Merge tag 'for-master-20181130' of git://git.denx.de/u-boot-rockchip

Improvements:
- RK3188 USB-UART functionality
- errors triggering a hard-stop in SPL on the RK3399 are reported
- Rockchip RV1108 (SoC) support
- MicroCrystal RV3029 (RTC) DM driver

Fixes:
- RK3188 early UART setup
- limit SD-card frequency to 40MHz on the RK3399-Q7
- MIPI fixes
- RK3399 CPUB clock initialisation
2018-12-01 14:17:27 -05:00
Tom Rini
daec1fd482 - MIPS: MT76xx: minor fixes and updates to gardena-smart-gateway board
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiQkHUH+J02LLC9InKPlOlyTyXBgFAlwBZBwACgkQKPlOlyTy
 XBjWRA/9H5VG/VGv12d5BotHHSOYEVtEGfIA1yswX4EwJU693k2PWDLXXnr7k8TB
 MH0He/Fzdc2zON594kZKh4kkbMpf97ujBR3r4OGUtbI6O3gyf5rzkO//Y7LnhuvG
 JkEEQCqCKTEyUa2V+CrmF0ln3riFfgd+2AVlqYFVN/mua1/SWMKXjT+sOjO4fNEu
 R7Lp+clgvUNw9/Fq1fMZ4iaexeVUdPduDeTJTmi06ij4ZyV+tnDlcaMzfTTJkT8i
 TDmZfpZcJsxR2DryE9pTc2JoTrePCmhvRtKd7W97IkkmgVwT4QgOcZPzrz2NX0XZ
 XgprPaXpAEvu7/TUmvqDFask4FFQHAuELUXwtaQd6122Jp0rqwDh7IAvGmqjpQVR
 rGjBjxIs1tfjGgqn1O8rOaZKFqNoRSRbnRfR0CNeRG5fV6AzTHGo3AkhPvUzOJut
 9l1MuGmZcHGEuWI2oBondkOo9Fv+DrBIAEri+M4+rVlN6NszkwuvgJcJMqFrWXbU
 42Ut2bkaxAUDnzjF+01ZfCQ7e9oyenjGWOYXzI3sexJEenTaCpO6++a7T5EnNo2O
 w1fq5t1ztuuw9Zb3lBfhtFnYW9eNhFtZkf+VeNdwK+YUxafzQRR9MoIBTmZlzcMp
 TbKeKACLO2GhXXaIyHB2aS9fSKQI/icAqrhbcMAdSW6YRvg62sI=
 =PDqP
 -----END PGP SIGNATURE-----

Merge tag 'mips-pull-2018-11-30' of git://git.denx.de/u-boot-mips

- MIPS: MT76xx: minor fixes and updates to gardena-smart-gateway board
2018-11-30 17:09:33 -05:00
Kever Yang
ae66a0e1a2 rockchip: rock: remove TPL_TINY_MEMSET
The RK3188 rock board does not need TPL: remove TPL_TINY_MEMSET from
config.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
[Fixed up commit message:]
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-11-30 21:56:44 +01:00
Stefan Roese
d09d21cd2d mips: mt76xx: gardena-smart-gateway: Misc updates to defconfig
The following changes are made:
- Add default bootcmd which can be used for initial start-up
- Setup necessary MTD parts for Linux compatibility

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-30 17:21:44 +01:00
Baruch Siach
4825380539 arm: mvebu: mcbin: configs: enable network driver
Enable the mvpp2 Ethernet driver and the Marvell Ethernet PHY driver.
This makes the Macchiatobin 1Gb Ethernet interface usable.

Cc: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-11-30 10:58:10 +01:00
Chris Packham
6aaf76beb1 arm: kirkwood: configs: dreamplug: Convert to DM_SPI
Enable CONFIG_DM_SPI=y and CONFIG_DM_SPI_FLASH=y in the defconfig.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-11-30 10:58:10 +01:00
Chris Packham
f9c2548f7d arm: kirkwood: configs: ds109: Convert to DM_SPI
Enable CONFIG_DM_SPI=y and CONFIG_DM_SPI_FLASH=y in the defconfig.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-11-30 10:58:10 +01:00
Chris Packham
126461d7fa arm: kirkwood: configs: Convert Allied Telesis boards to DM_SPI
Enable CONFIG_DM_SPI=y and CONFIG_DM_SPI_FLASH=y in the defconfig.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-11-30 10:57:59 +01:00
Baruch Siach
d3b2fb56c9 arm: mvebu: configs: armada8k: use 2 DRAM banks
Commit 2b4d964718 ("arm64: mvebu: a8k: autodetect RAM size") added an
ATF query to get the detected RAM size on Armada 8K platforms. To be
usable we must have 2 DRAM banks. Set Armada 8K configurations to 2
banks.

Cc: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-11-30 10:56:08 +01:00
Michal Simek
ebcc1a223e arm64: zynqmp: Wire mini-emmc1 configuration with zcu102
For testing purpose use zcu102 which has SD at controller 1 and this can
be used for testing this mini configuration.

U-Boot 2018.11-00279-gdc482e7ee092 (Nov 30 2018 - 10:22:56 +0100)

Model: ZynqMP MINI EMMC1
Board: Xilinx ZynqMP
DRAM:  512 MiB
EL Level:       EL3
MMC:   sdhci@ff170000: 0
In:    dcc
Out:   dcc
Err:   dcc
ZynqMP>

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-30 10:45:26 +01:00
Michal Simek
f5ed777d29 arm64: zynqmp: Wire mini-emmc0 configuration with zcu100
For testing purpose use zcu100 which has SD at controller 0 and this can
be used for testing this mini configuration.

U-Boot 2018.11-00281-gc5d48466e76e (Nov 30 2018 - 10:41:05 +0100)

Model: ZynqMP MINI EMMC0
Board: Xilinx ZynqMP
DRAM:  512 MiB
EL Level:       EL3
MMC:   sdhci@ff160000: 0
In:    dcc
Out:   dcc
Err:   dcc
ZynqMP>

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-30 10:45:26 +01:00
Michal Simek
ee97a9996a arm64: zynqmp: Add mini mtest configuration
This configuration is useful when you want to run small u-boot and
perform DDR memory test to make sure that DDR is properly configured.
It is use for board bringup because alternative u-boot memory tests is
quite good.
Configuration is running out of OCM.

As is done for others mini configurations 0x80 bytes for variables is
enough and only default variables are stored there.

Alternative memtest is enabled and also 2GB of DDR via DTS files.
Configuration is enabling ZYNQMP_PSU_INIT_ENABLED and include psu_init()
from zcu102 for testing purpose.
In case of size issue this can be moved to SPL configuration as is done
for mini_qspi configuration but it is not a problem now.

Log:
U-Boot 2018.11-00268-gbd58b8ba8915 (Nov 29 2018 - 15:33:35 +0100)

Model: ZynqMP MINI
Board: Xilinx ZynqMP
DRAM:  WARNING: Initializing TCM overwrites TCM content
2 GiB
EL Level:       EL3
In:    dcc
Out:   dcc
Err:   dcc
ZynqMP>

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-30 10:45:26 +01:00
Michal Simek
8cf1a6e83b arm64: zynqmp: Use minimal size for environment variables
There is no reason to have huge space for variables because none is
using that. But there are some which are setup automatically.

baudrate=115200
fdtcontroladdr=ffffa0d0
stderr=dcc
stdin=dcc
stdout=dcc

Environment size: 72/124 bytes

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-30 10:45:26 +01:00
Michal Simek
1eebaef201 arm64: zynqmp: Do not save variables about board
No reason to save this data to environment.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-30 10:45:25 +01:00
Tom Rini
93e72ac472 Cleanup and update towards support for Amlogic Meson AXG SoCs :
- mmc: meson-gx: Add AXG compatible
 - net: designware: add meson meson compatibles
 - Amlogic Meson cleanup for AXG SoC support
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJb/AwoAAoJEHfc29rIyEnR2dMQANCsuWQzKASCLgUzeL/KWhQ8
 gj1YEVGbS0meQ35hNo0hL6qfN4VkjazawyWnb40HVVADBjil42QuxN9rncovg69Q
 ZvPEo4XYNCkDzOU3UmoR2rjxxGICVFY6GCOuNbqzvB2x4gWJmoUeByqewKW2g2Zp
 jyjbzYvJ+r8wLtUFbdqaGvsHHC8hiIkjyeaqdXUc6NHJrGYasRuOsCO92bEioYC1
 XPh76c2ABAnbzJy7GArdlBbDOQrQxoEskVeP47ZjiPywXxGCkgHaRSXaUKzpz30G
 8MrA5AciL6pmurmsM0APlgvJwL7qaX1P6NxiJ+12prWWfAk1ZC2/MEKVZY+gO/CF
 vUAyzhus1oJ5JjccCngy/1ftkIReueSbUrzGYFvqhihs9g4QyRpi7F5MDKX0MvP2
 uk+XXStXs+rOZ2YdMFlV8l6G12TijcViZVmVHdh8qdl4t8WFlv7gENVUM+0mhyu2
 x5OsoYz5w2h9hCh/CB3oIZfyJBe5VZVHZ2fWIRZJ72J7toUGMewlKYQq2LOv7A9q
 w6vRGnza3fSPUZgYenznohaeo9vXG/WX7cNSPQiNBoiGeC+Y2ko5NHe2MIEnUD4c
 amp21KA6rWnWeHHvDbwo5DJ+NhCd6uMgkiZDLCuiTtns1/a03l0V6kgOvQLIBjhK
 KxBWBn6+rDPq1wJxhxab
 =Oo1g
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20181126' of git://git.denx.de/u-boot-amlogic

Cleanup and update towards support for Amlogic Meson AXG SoCs :
- mmc: meson-gx: Add AXG compatible
- net: designware: add meson meson compatibles
- Amlogic Meson cleanup for AXG SoC support
2018-11-29 15:16:58 -05:00
Michal Simek
a837cfe5b2 arm64: zynqmp: Enable SPL for mini qspi configuration
Wire up mini_qspi SPL with zcu102 for testing purpose.
Normally mini u-boot runs with FSBL/SPL for certain board.
Enabling SPL and configuration from zcu102 helps with testing.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-29 15:13:57 +01:00
Michal Simek
e22687c190 arm64: zynqmp: Disable autoboot feature for mini
There is no reason to have autoboot enabled because it should never
start anything automatically.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-29 15:11:47 +01:00
Michal Simek
e27e6eb6f9 ARM: zynq: Disable net for cse nor/nand
There is no need to waste 6k if none needs it.

zynq_cse_nand  : all -6486 bss -20 data -136 rodata -606 text -5724
zynq_cse_nor   : all -6486 bss -20 data -136 rodata -606 text -5724

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-29 10:36:49 +01:00
Michal Simek
2b4367dfee ARM: zynq: Enable mtest command at least on one platform
mtest is being checked by test/py framework and this test should run at
least on one platform that's why enabling mtest on zc702.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-29 10:32:31 +01:00
Weijie Gao
361e13f1d5 arm: MediaTek: add basic support for MT7623 boards
This adds a general board file based on MT7623 SoCs from MediaTek.

As this u-boot is loaded by MTK proprietary preloader, there is no
low level initializtion codes.

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Tested-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-28 23:04:50 -05:00
Ryder Lee
cbd2fba1ec arm: MediaTek: add basic support for MT7629 boards
This adds a general board file based on MT7629 SoCs from MediaTek.

Apart from the generic parts (cpu) we add some low level init codes
and initialize the early clocks.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-28 23:04:50 -05:00
Tom Rini
67cf22cbde Merge branch 'master' of git://git.denx.de/u-boot-usb
- Introduce CONFIG_SPL_DM_USB
2018-11-27 14:01:45 -05:00
Marcin Niestroj
f1bca34ebf ARM: chiliboard: move towards driver model and device-tree boot
This patch mostly enables DM drivers in board defconfig and all their
dependencies. Additionally we remove ethernet platform data, as all
details are in device-tree now.

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-11-26 22:52:14 -05:00
Otavio Salvador
58fcca0c00 ARM: vexpress_*_defconfig: Enable CMD_UBI support
This allow for convenient use of QEMU machine to test loading of UBI
filesystem. There are a couple of changes made together of this which
are required:

 1) The malloc must be at least 512 KiB to allow the use of UBI
    filesystem. We are going to enable it in a next patch.

 2) MTD_DEVICE must be enabled, otherwise we get missing symbols
    during the build

Following configs were change:

 - vexpress_aemv8a_dram_defconfig
 - vexpress_aemv8a_juno_defconfig
 - vexpress_aemv8a_semi_defconfig
 - vexpress_ca15_tc2_defconfig
 - vexpress_ca5x2_defconfig
 - vexpress_ca9x4_defconfig

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
2018-11-26 22:52:13 -05:00
Tom Rini
ef0b75d3d8 Merge git://git.denx.de/u-boot-riscv 2018-11-26 15:52:39 -05:00
Sven Schwermer
2a03114e6e usb: am335x_evm: Disable CONFIG_SPL_DM_USB
This configuration doesn't use USB in the SPL, so we need to disable
driver model for USB in the SPL.

Signed-off-by: Sven Schwermer <sven@svenschwermer.de>
2018-11-26 21:19:03 +01:00
Neil Armstrong
b72794e37e board: amlogic: add support for S400 board
The S400 board is the Amlogic AXG SoC reference board including :
 - Amlogic A113DX ARM Cortex-A53 quad-core SoC @ 1.2GHz
 - 1GB DDR4 SDRAM
 - 10/100 Ethernet
 - 2 x USB 2.0 Host
 - eMMC
 - Infrared receiver
 - SDIO WiFi Module
 - MIPI DSI Connector
 - Audio HAT Connector
 - PCI-E M.2 Connectors

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-11-26 14:40:52 +01:00
Jerome Brunet
96a739b460 ARM: rework amlogic configuration
Rework the board SYS_BOARD, SYS_VENDOR and SYS_CONFIG_NAME setup by moving
the board Kconfig into the mach-meson Kconfig to make it easier to add
new boards for a SoC architecture and add a custom config header or custom
board handler for a platform.

This drops the board CONFIGs and the duplicate boards configs headers in
favor of a single meson64.h config header.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-11-26 14:40:52 +01:00
Jerome Brunet
d54e03b612 board: amlogic: factorise gxbb boards
The nanopi-k2 and the odroid-c2 are similar enough to be supported
by the same u-boot board. This change use odroid-c2 u-boot board
for the nanopi-k2 as well. Dedicated defconfig are kept to customize
the names and device tree.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-11-26 14:40:51 +01:00
Neil Armstrong
302987b6c5 board: amlogic: move khadas-vim2 as q200 ref board
The Khadas vim2 derive from amlogic s912 reference design (Q200).

This patch moves the khadas-vim2 board support to a generic Q200 board,
while keeping a dedicated defconfig to customize the names and device tree.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-11-26 14:40:51 +01:00
Jerome Brunet
8bbfb40e57 board: amlogic: remove p212 derivatives
The Khadas vim and the libretech aml-s905x-cc (aka Potato) derive
from amlogic s905x reference design (P212).

All the code in these board is a copy/paste from the p212, which is
tedious to maintain. This change use p212 u-boot board for all these
boards, while keeping a dedicated defconfig to customize the names
and device tree.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-11-26 14:40:51 +01:00
Simon Glass
b0edea3c27 spl: Add support for passing handoff info to U-Boot proper
There is some basic informaton that SPL normally wants to pass through to
U-Boot, such as the SDRAM size and bank information.

Mkae use of the new bloblist structure for this. Add a new 'handoff' blob
which is set up in SPL and passed to U-Boot proper. Also adda  test for
sandbox_spl that checks that this works correctly and a new 'sb' command
to show the information passed from SPL.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-26 08:25:37 -05:00
Michal Simek
12ef7e22ec microblaze: Showing model information from DT by default
Show information about board read from DT by default to know what board
U-Boot is running at.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-26 10:50:55 +01:00
Michal Simek
09a4c91b66 arm64: zynqmp: Disable bootelf and fdt commands for mini configurations
There is no reason to enable these commands for mini configurations.
It saves some space:
   aarch64: (for 2/2 boards) all -19076.0 bss -1048.0 data -1720.0
rodata -3840.0 text -12468.0
            xilinx_zynqmp_mini_emmc1: all -19076 bss -1048 data -1720
rodata -3840 text -12468
            xilinx_zynqmp_mini_emmc0: all -19076 bss -1048 data -1720
rodata -3840 text -12468

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-26 10:50:55 +01:00