cosmetic: Fix spelling and whitespace errors

Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
This commit is contained in:
Thomas Hebb 2019-11-13 18:18:03 -08:00 committed by Tom Rini
parent 983c0f91d8
commit 32f2ca2a7e
14 changed files with 28 additions and 26 deletions

View File

@ -1692,7 +1692,7 @@ u-boot.sym: u-boot FORCE
# make sure no implicit rule kicks in
$(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ;
# Handle descending into subdirectories listed in $(vmlinux-dirs)
# Handle descending into subdirectories listed in $(u-boot-dirs)
# Preset locale variables to speed up the build process. Limit locale
# tweaks to this spot to avoid wrong language settings when running
# make menuconfig etc.

16
README
View File

@ -3082,14 +3082,16 @@ Low Level (hardware related) configuration options:
instruction cache) is still performed.
- CONFIG_SPL_BUILD
Modifies the behaviour of start.S when compiling a loader
that is executed before the actual U-Boot. E.g. when
compiling a NAND SPL.
Set when the currently-running compilation is for an artifact
that will end up in the SPL (as opposed to the TPL or U-Boot
proper). Code that needs stage-specific behavior should check
this.
- CONFIG_TPL_BUILD
Modifies the behaviour of start.S when compiling a loader
that is executed after the SPL and before the actual U-Boot.
It is loaded by the SPL.
Set when the currently-running compilation is for an artifact
that will end up in the TPL (as opposed to the SPL or U-Boot
proper). Code that needs stage-specific behavior should check
this.
- CONFIG_SYS_MPC85XX_NO_RESETVEC
Only for 85xx systems. If this variable is specified, the section
@ -3306,7 +3308,7 @@ Testing of U-Boot Modifications, Ports to New Hardware, etc.:
If you have modified U-Boot sources (for instance added a new board
or support for new devices, a new CPU, etc.) you are expected to
provide feedback to the other developers. The feedback normally takes
the form of a "patch", i. e. a context diff against a certain (latest
the form of a "patch", i.e. a context diff against a certain (latest
official or latest in the git repository) version of U-Boot sources.
But before you submit such a patch, please verify that your modifi-

View File

@ -312,7 +312,7 @@ config TPL_ROCKCHIP_COMMON_BOARD
Rockchip SoCs have similar boot process, prefer to use TPL for DRAM
init and back to bootrom, and SPL as Trust ATF/U-Boot loader. TPL
common board is a basic TPL board init which can be shared for most
of SoCs to avoid copy-pase for different SoCs.
of SoCs to avoid copy-paste for different SoCs.
config ROCKCHIP_BOOT_MODE_REG
hex "Rockchip boot mode flag register address"

View File

@ -39,8 +39,8 @@ void back_to_bootrom(enum rockchip_bootrom_cmd brom_cmd)
* to check it and back to bootrom at very early bootstage(before
* some basic configurations(such as interrupts) been
* changed by TPL/SPL, as the bootrom download operation
* relys on many default settings(such as interrupts) by
* it's self.
* relies on many default settings(such as interrupts) by
* itself.
*/
static bool check_back_to_brom_dnl_flag(void)
{

View File

@ -6,9 +6,9 @@ choice
config TARGET_EVB_RK3399
bool "RK3399 evaluation board"
help
RK3399evb is a evaluation board for Rockchp rk3399,
with full function and phisical connectors support like type-C ports,
usb2.0 host ports, LVDS, JTAG, MAC, SDcard, HDMI, USB-2-serial...
RK3399evb is a evaluation board for Rockchip RK3399,
with full function and physical connectors support like Type-C ports,
USB.0 host ports, LVDS, JTAG, MAC, SD card, HDMI, USB-to-serial...
config TARGET_PUMA_RK3399
bool "Theobroma Systems RK3399-Q7 (Puma)"

View File

@ -35,7 +35,7 @@ static int spl_node_to_boot_device(int node)
/*
* This should eventually move into the SPL code, once SPL becomes
* aware of the block-device layer. Until then (and to avoid unneeded
* delays in getting this feature out, it lives at the board-level).
* delays in getting this feature out), it lives at the board-level.
*/
if (!uclass_get_device_by_of_offset(UCLASS_MMC, node, &parent)) {
struct udevice *dev;

View File

@ -9,7 +9,7 @@ RK3399 key features we might use in U-Boot:
* DRAM: 4GB-128MB dual-channel
* eMMC: support eMMC 5.0/5.1, suport HS400, HS200, DDR50
* SD/MMC: support SD 3.0, MMC 4.51
* USB: USB3.0 typc-C port *2 with dwc3 controller
* USB: USB3.0 type-C port *2 with dwc3 controller
* USB2.0 EHCI host port *2
* Display: RGB/HDMI/DP/MIPI/EDP

View File

@ -268,7 +268,7 @@ config SPL_BANNER_PRINT
default y
help
If this option is enabled, SPL will print the banner with version
info. Disabling this option could be useful to reduce TPL boot time
info. Disabling this option could be useful to reduce SPL boot time
(e.g. approx. 6 ms faster, when output on i.MX6 with 115200 baud).
config TPL_BANNER_PRINT
@ -276,8 +276,8 @@ config TPL_BANNER_PRINT
depends on TPL
default y
help
If this option is enabled, SPL will not print the banner with version
info. Disabling this option could be useful to reduce SPL boot time
If this option is enabled, TPL will print the banner with version
info. Disabling this option could be useful to reduce TPL boot time
(e.g. approx. 6 ms faster, when output on i.MX6 with 115200 baud).
config SPL_EARLY_BSS

View File

@ -75,7 +75,7 @@ with:
- the nodes with one pre-relocation property:
'u-boot,dm-pre-reloc' or 'u-boot,dm-spl'
ftgrep is also used to remove:
fdtgrep is also used to remove:
- the properties defined in CONFIG_OF_SPL_REMOVE_PROPS
- all the pre-relocation properties
('u-boot,dm-pre-reloc', 'u-boot,dm-spl' and 'u-boot,dm-tpl')

View File

@ -31,7 +31,7 @@ make environment and also appended to CPPFLAGS with -DCONFIG_TPL_BUILD.
The SPL options are shared by SPL and TPL, the board config file should
determine which SPL options to choose based on whether CONFIG_TPL_BUILD
is set. Source files can be compiled for TPL with options choosed in the
is set. Source files can be compiled for TPL with options chosen in the
board config file.
TPL use a small device tree (u-boot-tpl.dtb), containing only the nodes with

View File

@ -262,7 +262,7 @@ o config-1
- loadables : Unit name containing a list of additional binaries to be
loaded at their given locations. "loadables" is a comma-separated list
of strings. U-Boot will load each binary at its given start-address and
may optionaly invoke additional post-processing steps on this binary based
may optionally invoke additional post-processing steps on this binary based
on its component image node type.
- compatible : The root compatible string of the U-Boot device tree that
this configuration shall automatically match when CONFIG_FIT_BEST_MATCH is

View File

@ -73,7 +73,7 @@ any dependencies between them
and brought in as needed
- Provides for a standard image description available in the build and at
run-time
- SoC-specific image-signing tools can be accomodated
- SoC-specific image-signing tools can be accommodated
- Avoids cluttering the U-Boot build system with image-building code
- The image description is automatically available at run-time in U-Boot,
SPL. It can be made available to other software also

View File

@ -519,7 +519,7 @@ Properties / Entry arguments:
This file contains code used by the SoC that is required to make it work.
The Management Engine is like a background task that runs things that are
not clearly documented, but may include keyboard, deplay and network
not clearly documented, but may include keyboard, display and network
access. For platform that use ME it is not possible to disable it. U-Boot
does not directly execute code in the ME binary.
@ -593,7 +593,7 @@ Entry: powerpc-mpc85xx-bootpg-resetvec: PowerPC mpc85xx bootpg + resetvec code f
Properties / Entry arguments:
- filename: Filename of u-boot-br.bin (default 'u-boot-br.bin')
This enrty is valid for PowerPC mpc85xx cpus. This entry holds
This entry is valid for PowerPC mpc85xx cpus. This entry holds
'bootpg + resetvec' code for PowerPC mpc85xx CPUs which needs to be
placed at offset 'RESET_VECTOR_ADDRESS - 0xffc'.