From 32f2ca2a7e2ec3ecd0cfd56faebf4003001226fd Mon Sep 17 00:00:00 2001 From: Thomas Hebb Date: Wed, 13 Nov 2019 18:18:03 -0800 Subject: [PATCH] cosmetic: Fix spelling and whitespace errors Signed-off-by: Thomas Hebb --- Makefile | 2 +- README | 16 +++++++++------- arch/arm/cpu/armv8/sec_firmware.c | 2 +- arch/arm/mach-rockchip/Kconfig | 2 +- arch/arm/mach-rockchip/bootrom.c | 4 ++-- arch/arm/mach-rockchip/rk3399/Kconfig | 6 +++--- arch/arm/mach-rockchip/spl-boot-order.c | 2 +- board/rockchip/evb_rk3399/README | 2 +- common/spl/Kconfig | 6 +++--- doc/README.SPL | 2 +- doc/README.TPL | 2 +- doc/uImage.FIT/source_file_format.txt | 2 +- tools/binman/README | 2 +- tools/binman/README.entries | 4 ++-- 14 files changed, 28 insertions(+), 26 deletions(-) diff --git a/Makefile b/Makefile index 70347d340c..556cebdfc4 100644 --- a/Makefile +++ b/Makefile @@ -1692,7 +1692,7 @@ u-boot.sym: u-boot FORCE # make sure no implicit rule kicks in $(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ; -# Handle descending into subdirectories listed in $(vmlinux-dirs) +# Handle descending into subdirectories listed in $(u-boot-dirs) # Preset locale variables to speed up the build process. Limit locale # tweaks to this spot to avoid wrong language settings when running # make menuconfig etc. diff --git a/README b/README index 107e67fdda..91dfb24776 100644 --- a/README +++ b/README @@ -3082,14 +3082,16 @@ Low Level (hardware related) configuration options: instruction cache) is still performed. - CONFIG_SPL_BUILD - Modifies the behaviour of start.S when compiling a loader - that is executed before the actual U-Boot. E.g. when - compiling a NAND SPL. + Set when the currently-running compilation is for an artifact + that will end up in the SPL (as opposed to the TPL or U-Boot + proper). Code that needs stage-specific behavior should check + this. - CONFIG_TPL_BUILD - Modifies the behaviour of start.S when compiling a loader - that is executed after the SPL and before the actual U-Boot. - It is loaded by the SPL. + Set when the currently-running compilation is for an artifact + that will end up in the TPL (as opposed to the SPL or U-Boot + proper). Code that needs stage-specific behavior should check + this. - CONFIG_SYS_MPC85XX_NO_RESETVEC Only for 85xx systems. If this variable is specified, the section @@ -3306,7 +3308,7 @@ Testing of U-Boot Modifications, Ports to New Hardware, etc.: If you have modified U-Boot sources (for instance added a new board or support for new devices, a new CPU, etc.) you are expected to provide feedback to the other developers. The feedback normally takes -the form of a "patch", i. e. a context diff against a certain (latest +the form of a "patch", i.e. a context diff against a certain (latest official or latest in the git repository) version of U-Boot sources. But before you submit such a patch, please verify that your modifi- diff --git a/arch/arm/cpu/armv8/sec_firmware.c b/arch/arm/cpu/armv8/sec_firmware.c index 11f9b4df38..4dcda70b91 100644 --- a/arch/arm/cpu/armv8/sec_firmware.c +++ b/arch/arm/cpu/armv8/sec_firmware.c @@ -354,7 +354,7 @@ bool sec_firmware_support_hwrng(void) return true; #endif if (sec_firmware_addr & SEC_FIRMWARE_RUNNING) { - return true; + return true; } return false; diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index 493699472c..d8d68ba447 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -312,7 +312,7 @@ config TPL_ROCKCHIP_COMMON_BOARD Rockchip SoCs have similar boot process, prefer to use TPL for DRAM init and back to bootrom, and SPL as Trust ATF/U-Boot loader. TPL common board is a basic TPL board init which can be shared for most - of SoCs to avoid copy-pase for different SoCs. + of SoCs to avoid copy-paste for different SoCs. config ROCKCHIP_BOOT_MODE_REG hex "Rockchip boot mode flag register address" diff --git a/arch/arm/mach-rockchip/bootrom.c b/arch/arm/mach-rockchip/bootrom.c index 9ccb45e6ac..10614c99d9 100644 --- a/arch/arm/mach-rockchip/bootrom.c +++ b/arch/arm/mach-rockchip/bootrom.c @@ -39,8 +39,8 @@ void back_to_bootrom(enum rockchip_bootrom_cmd brom_cmd) * to check it and back to bootrom at very early bootstage(before * some basic configurations(such as interrupts) been * changed by TPL/SPL, as the bootrom download operation - * relys on many default settings(such as interrupts) by - * it's self. + * relies on many default settings(such as interrupts) by + * itself. */ static bool check_back_to_brom_dnl_flag(void) { diff --git a/arch/arm/mach-rockchip/rk3399/Kconfig b/arch/arm/mach-rockchip/rk3399/Kconfig index 01af3f1464..868e85fc2a 100644 --- a/arch/arm/mach-rockchip/rk3399/Kconfig +++ b/arch/arm/mach-rockchip/rk3399/Kconfig @@ -6,9 +6,9 @@ choice config TARGET_EVB_RK3399 bool "RK3399 evaluation board" help - RK3399evb is a evaluation board for Rockchp rk3399, - with full function and phisical connectors support like type-C ports, - usb2.0 host ports, LVDS, JTAG, MAC, SDcard, HDMI, USB-2-serial... + RK3399evb is a evaluation board for Rockchip RK3399, + with full function and physical connectors support like Type-C ports, + USB.0 host ports, LVDS, JTAG, MAC, SD card, HDMI, USB-to-serial... config TARGET_PUMA_RK3399 bool "Theobroma Systems RK3399-Q7 (Puma)" diff --git a/arch/arm/mach-rockchip/spl-boot-order.c b/arch/arm/mach-rockchip/spl-boot-order.c index fa8e096426..c147d5821e 100644 --- a/arch/arm/mach-rockchip/spl-boot-order.c +++ b/arch/arm/mach-rockchip/spl-boot-order.c @@ -35,7 +35,7 @@ static int spl_node_to_boot_device(int node) /* * This should eventually move into the SPL code, once SPL becomes * aware of the block-device layer. Until then (and to avoid unneeded - * delays in getting this feature out, it lives at the board-level). + * delays in getting this feature out), it lives at the board-level. */ if (!uclass_get_device_by_of_offset(UCLASS_MMC, node, &parent)) { struct udevice *dev; diff --git a/board/rockchip/evb_rk3399/README b/board/rockchip/evb_rk3399/README index ea3258cf37..da7ae89ab1 100644 --- a/board/rockchip/evb_rk3399/README +++ b/board/rockchip/evb_rk3399/README @@ -9,7 +9,7 @@ RK3399 key features we might use in U-Boot: * DRAM: 4GB-128MB dual-channel * eMMC: support eMMC 5.0/5.1, suport HS400, HS200, DDR50 * SD/MMC: support SD 3.0, MMC 4.51 -* USB: USB3.0 typc-C port *2 with dwc3 controller +* USB: USB3.0 type-C port *2 with dwc3 controller * USB2.0 EHCI host port *2 * Display: RGB/HDMI/DP/MIPI/EDP diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 1f122833a7..e11faae9ee 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -268,7 +268,7 @@ config SPL_BANNER_PRINT default y help If this option is enabled, SPL will print the banner with version - info. Disabling this option could be useful to reduce TPL boot time + info. Disabling this option could be useful to reduce SPL boot time (e.g. approx. 6 ms faster, when output on i.MX6 with 115200 baud). config TPL_BANNER_PRINT @@ -276,8 +276,8 @@ config TPL_BANNER_PRINT depends on TPL default y help - If this option is enabled, SPL will not print the banner with version - info. Disabling this option could be useful to reduce SPL boot time + If this option is enabled, TPL will print the banner with version + info. Disabling this option could be useful to reduce TPL boot time (e.g. approx. 6 ms faster, when output on i.MX6 with 115200 baud). config SPL_EARLY_BSS diff --git a/doc/README.SPL b/doc/README.SPL index 6eed83f8c5..3c931ec720 100644 --- a/doc/README.SPL +++ b/doc/README.SPL @@ -75,7 +75,7 @@ with: - the nodes with one pre-relocation property: 'u-boot,dm-pre-reloc' or 'u-boot,dm-spl' -ftgrep is also used to remove: +fdtgrep is also used to remove: - the properties defined in CONFIG_OF_SPL_REMOVE_PROPS - all the pre-relocation properties ('u-boot,dm-pre-reloc', 'u-boot,dm-spl' and 'u-boot,dm-tpl') diff --git a/doc/README.TPL b/doc/README.TPL index c94129fdc9..72027fd692 100644 --- a/doc/README.TPL +++ b/doc/README.TPL @@ -31,7 +31,7 @@ make environment and also appended to CPPFLAGS with -DCONFIG_TPL_BUILD. The SPL options are shared by SPL and TPL, the board config file should determine which SPL options to choose based on whether CONFIG_TPL_BUILD -is set. Source files can be compiled for TPL with options choosed in the +is set. Source files can be compiled for TPL with options chosen in the board config file. TPL use a small device tree (u-boot-tpl.dtb), containing only the nodes with diff --git a/doc/uImage.FIT/source_file_format.txt b/doc/uImage.FIT/source_file_format.txt index f8e27ed34e..18d2aedcb7 100644 --- a/doc/uImage.FIT/source_file_format.txt +++ b/doc/uImage.FIT/source_file_format.txt @@ -262,7 +262,7 @@ o config-1 - loadables : Unit name containing a list of additional binaries to be loaded at their given locations. "loadables" is a comma-separated list of strings. U-Boot will load each binary at its given start-address and - may optionaly invoke additional post-processing steps on this binary based + may optionally invoke additional post-processing steps on this binary based on its component image node type. - compatible : The root compatible string of the U-Boot device tree that this configuration shall automatically match when CONFIG_FIT_BEST_MATCH is diff --git a/tools/binman/README b/tools/binman/README index 20a80944e2..a6a3ee48aa 100644 --- a/tools/binman/README +++ b/tools/binman/README @@ -73,7 +73,7 @@ any dependencies between them and brought in as needed - Provides for a standard image description available in the build and at run-time -- SoC-specific image-signing tools can be accomodated +- SoC-specific image-signing tools can be accommodated - Avoids cluttering the U-Boot build system with image-building code - The image description is automatically available at run-time in U-Boot, SPL. It can be made available to other software also diff --git a/tools/binman/README.entries b/tools/binman/README.entries index 1099433521..0576e63a86 100644 --- a/tools/binman/README.entries +++ b/tools/binman/README.entries @@ -519,7 +519,7 @@ Properties / Entry arguments: This file contains code used by the SoC that is required to make it work. The Management Engine is like a background task that runs things that are -not clearly documented, but may include keyboard, deplay and network +not clearly documented, but may include keyboard, display and network access. For platform that use ME it is not possible to disable it. U-Boot does not directly execute code in the ME binary. @@ -593,7 +593,7 @@ Entry: powerpc-mpc85xx-bootpg-resetvec: PowerPC mpc85xx bootpg + resetvec code f Properties / Entry arguments: - filename: Filename of u-boot-br.bin (default 'u-boot-br.bin') -This enrty is valid for PowerPC mpc85xx cpus. This entry holds +This entry is valid for PowerPC mpc85xx cpus. This entry holds 'bootpg + resetvec' code for PowerPC mpc85xx CPUs which needs to be placed at offset 'RESET_VECTOR_ADDRESS - 0xffc'.