u-boot-brain/arch/arm/include/asm
Prabhakar Kushwaha f3f8c564a1 armv8/ls2085a: Update common header file
ls2085a_common.h contains hard-coded information for NOR/NAND flash,
I2C, DDR, etc. These are platform specific. Move them out of common
header file and placed into respective board header files.

Move TEXTBASE to 1MB offset to fit NOR flash with up to 1MB sector
size.

Enable command auto complete. Update prompt symbol. Set fdt_high to
0xa0000000 because Linux requires that the fdt  be 8-byte aligned
and below 512 MiB. Besides ensuring compliance with the 512 MiB
limit, this avoids problems with the dtb being misaligned within
the FIT image.

Change the MC FW, MC DPL and Debug server NOR addresses in compliance
with the NOR flash layouts for 128MB flash.

Add PCIe macros. Enable "loadb" command. Disable debug server.
Enable workaround for erratum A008511.
Stop reset on panic for postmortem debugging.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
2015-04-23 08:55:54 -07:00
..
arch-am33xx board: ti: AM43xx: added USB initializtion code 2015-04-14 05:48:11 +02:00
arch-arm720t
arch-armada100 ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
arch-armada-xp arm: armada-xp: Add SPL support used to include the DDR training code 2015-02-06 17:24:56 +01:00
arch-armv7
arch-bcm281xx bcm281xx: add support for "USB OTG clock" 2014-12-29 16:31:23 -05:00
arch-bcmcygnus arm: add Cygnus and NSP boards 2014-08-30 07:46:40 -04:00
arch-bcmnsp arm: add Cygnus and NSP boards 2014-08-30 07:46:40 -04:00
arch-ep93xx
arch-exynos arm: exynos: add display clocks for Exynos5800 2015-04-06 14:34:40 +09:00
arch-fsl-lsch3 armv8/ls2085a: Update common header file 2015-04-23 08:55:54 -07:00
arch-imx ARM: i.MX: provide access to reset cause through get_imx_reset_cause() 2015-02-17 10:42:54 +01:00
arch-lpc32xx lpc32xx: add support for board work_92105 2015-04-10 14:23:39 +02:00
arch-ls102xa QE/DeepSleep: add QE deepsleep support for mpc85xx 2015-04-21 10:19:19 -07:00
arch-mvebu arm: marvell: Move arch-kirkwood/spi.h to arch-mvebu/spi.h 2014-10-23 09:59:20 -04:00
arch-mx5 mx5: fix get_reset_cause 2015-03-05 10:29:27 +01:00
arch-mx6 imx6: Added DEK blob generator command 2015-03-02 09:57:06 +01:00
arch-mx25
arch-mx27
arch-mx31 arm: mx31: use common timer functions 2014-09-16 12:51:46 +02:00
arch-mx35 arm: mx35: use common timer functions 2014-09-16 12:53:09 +02:00
arch-mxs arm: mxs: Add 'Wait for JTAG user' if booted in JTAG mode 2015-02-10 12:48:50 +01:00
arch-omap3 ARM: OMAP3: rx51: Enable workaround for ARM errata 454179, 430973, 621766 2015-03-13 09:29:33 -04:00
arch-omap4 ARM: OMAP: Change set_pl310_ctrl_reg to be generic 2015-03-13 09:28:55 -04:00
arch-omap5 board: ti: DRA7: added USB initializtion code 2015-04-14 05:48:11 +02:00
arch-orion5x edminiv2: switch to SPL 2015-02-25 07:59:50 +01:00
arch-pxa
arch-rmobile arm: rmobile: alt: Add support SDHI 2015-02-25 13:13:38 +09:00
arch-s3c24x0 mtd: nand: s3c: Unify the register definition and naming 2014-11-26 23:21:43 -06:00
arch-s5pc1xx dm: exynos: gpio: Convert to driver model 2014-10-22 10:36:36 -06:00
arch-sa1100
arch-socfpga socfpga: correctly increment freeze_controller_base address 2014-12-06 13:53:57 +01:00
arch-spear
arch-stv0991 stv0991: enable ethernet support 2014-12-09 15:16:19 -05:00
arch-sunxi sunxi: Complete i2c support for each supported platform 2015-04-15 16:33:17 +02:00
arch-tegra ARM: tegra: pinctrl: add support for MIPI PAD control groups 2015-03-30 09:54:06 -07:00
arch-tegra20 ARM: tegra: pinmux: account for different drivegroup base registers 2015-03-04 10:09:01 -07:00
arch-tegra30 ARM: tegra: pinmux: account for different drivegroup base registers 2015-03-04 10:09:01 -07:00
arch-tegra114 ARM: tegra: pinmux: account for different drivegroup base registers 2015-03-04 10:09:01 -07:00
arch-tegra124 ARM: tegra: enable MIPI PAD CTRL support for Tegra124 2015-03-30 09:54:06 -07:00
arch-tegra210 ARM: tegra: pinmux: add Tegra210 support 2015-03-04 10:09:02 -07:00
arch-u8500
arch-vf610 arm: vf610: improve evaluation of reset source 2014-12-01 10:20:22 +01:00
arch-zynq dm: zynq: Remove inline gpio functions 2015-01-29 17:09:52 -07:00
arch-zynqmp arm64: Add Xilinx ZynqMP support 2015-03-02 18:41:54 +01:00
armv8 armv8/fsl-lsch3: Change normal memory shareability 2015-02-24 13:08:22 -08:00
imx-common video, ipu: make ldb clock frequency overwritable through board code 2015-04-20 09:36:59 +02:00
iproc-common arm: add Cygnus and NSP boards 2014-08-30 07:46:40 -04:00
kona-common bcm281xx: add support for "USB OTG clock" 2014-12-29 16:31:23 -05:00
proc-armv ARM: add missing HYP mode constant 2014-07-28 17:06:35 +02:00
ti-common dma: ti-edma3: introduce edma3 driver 2014-10-23 11:27:29 -04:00
armv7.h ARM: Introduce erratum workaround for 454179 2015-03-13 09:28:48 -04:00
assembler.h arm: build arch memset/memcpy in Thumb2 mode 2015-01-09 10:20:22 -05:00
atomic.h
bitops.h
bootm.h
byteorder.h
cache.h
config.h ARMv8: enable pre-allocation malloc 2015-03-27 16:28:58 +01:00
davinci_rtc.h
dma-mapping.h arm: asm: dma-mapping: added dma_free_coherent API 2015-04-14 05:48:09 +02:00
ehci-omap.h
emif.h ARM: DRA7: EMIF: Update SDRAM_REF_CTRL register value 2015-02-16 12:41:40 -05:00
errno.h
fsl_secure_boot.h Add bootscript support to esbc_validate. 2015-04-21 10:19:19 -07:00
gic.h
global_data.h armv8/fsl-lsch3: Add support for second DDR clock 2015-02-24 13:09:14 -08:00
gpio.h
hardware.h
io.h arm: ls102xa: Add Freescale LS102xA SoC support 2014-09-08 10:30:32 -07:00
linkage.h
mach-types.h ARM: tegra: fix colibri_t20 machine type 2015-03-30 10:04:43 -07:00
macro.h Merge branch 'master' of git://git.denx.de/u-boot-tegra 2015-03-10 19:09:18 -04:00
memory.h
omap_boot.h
omap_common.h ARM: DRA7: Enable clocks for USB OTGSS and USB PHY 2015-04-14 05:48:08 +02:00
omap_gpio.h dm: omap: gpio: Support driver model 2014-10-23 19:29:07 -06:00
omap_mmc.h
omap_musb.h
pl310.h
posix_types.h
processor.h
psci.h ARM: PSCI: Rework the DT handler slightly 2015-03-09 11:13:29 -04:00
ptrace.h
sections.h
secure.h ARM: HYP/non-sec: allow relocation to secure RAM 2014-07-28 17:19:09 +02:00
setup.h
spl.h arm: spl: Avoid setting up a duplicate global data structure 2015-03-04 14:55:04 -05:00
string.h
system.h armv8/fsl-lsch3: Convert flushing L3 to assembly to avoid using stack 2015-02-24 13:08:46 -08:00
types.h include: asm: types: add resource_size_t type 2015-04-14 05:48:09 +02:00
u-boot-arm.h common: Move dram_init() declaration to common location 2015-02-09 15:08:48 +01:00
u-boot.h break build if it would produce broken binary 2015-04-13 10:52:51 -04:00
unaligned.h
utils.h