u-boot-brain/arch/arm/cpu/armv7
Nishanth Menon e52e334e5c ARM: DRA7: Add ABB setup for all domains
ABB should be initialized for all required domains voltage domain
for DRA7: IVA, GPU, EVE in addition to the existing MPU domain. If
we do not do this, kernel configuring just the frequency using the
default boot loader configured voltage can fail on many corner lot
units and has been hard to debug. This specifically is a concern with
DRA7 generation of SoCs since other than VDD_MPU, all other domains
are only permitted to setup the voltages to required OPP only at boot.

Reported-by: Richard Woodruff <r-woodruff2@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
2016-04-25 15:10:41 -04:00
..
am33xx ARM: Various: Future-proof serial platdata 2016-03-14 19:18:48 -04:00
bcm281xx bcm281xx: add support for "USB OTG clock" 2014-12-29 16:31:23 -05:00
bcmcygnus arm: bcmcygnus: Add bcmcygnus u-architecture 2014-08-30 07:46:40 -04:00
bcmnsp arm: bcmnsp: Add bcmnsp u-architecture 2014-08-30 07:46:40 -04:00
iproc-common arm: iproc: Initial commit of iproc architecture code 2014-08-30 07:46:40 -04:00
kona-common bcm281xx: add support for "USB OTG clock" 2014-12-29 16:31:23 -05:00
ls102xa armv7: ls102xa: Move smmu and stream id initialization into the common soc code 2016-02-24 08:51:15 -08:00
mx5 arch: Make board selection choices optional 2015-05-12 18:10:02 -04:00
mx6 Add initial support for Technexion's PICO-IMX6UL-EMMC board 2016-04-19 16:37:36 +02:00
mx7 imx: mx7d: move MX7D to Kconfig entry 2016-03-26 14:16:12 +01:00
omap3 sniper: Change vendor name from lge to lg, matching devicetree vendor prefix 2016-04-01 17:18:06 -04:00
omap4 omap4: Check warm reset for reboot mode validity 2016-03-15 15:12:54 -04:00
omap5 ARM: DRA7: Add ABB setup for all domains 2016-04-25 15:10:41 -04:00
omap-common ARM: DRA7: Add ABB setup for all domains 2016-04-25 15:10:41 -04:00
rmobile arm: rmobile: Add Stout board support 2015-08-31 17:32:59 +09:00
s5p-common s5p: cpu_info: print "cpu-model" if exists in dts 2015-11-02 10:37:59 +09:00
stv0991 stv0991: configure clock & pad muxing for qspi 2015-07-03 13:50:53 +05:30
sunxi sunxi: Move cpu independent code to mach directory 2016-04-01 09:52:28 +02:00
vf610 imx: vf610 add get_cpu_rev 2015-09-02 15:39:51 +02:00
arch_timer.c arm: add support for arch timer 2014-04-17 17:24:38 -04:00
cache_v7_asm.S arm: Replace v7_maint_dcache_all(ARMV7_DCACHE_INVAL_ALL) with asm code 2016-04-11 20:48:27 -04:00
cache_v7.c arm: Replace v7_maint_dcache_all(ARMV7_DCACHE_INVAL_ALL) with asm code 2016-04-11 20:48:27 -04:00
config.mk ARM: move -march=* and -mtune= options to arch/arm/Makefile 2015-03-27 16:55:22 +01:00
cp15.c ARM: Introduce erratum workaround for 454179 2015-03-13 09:28:48 -04:00
cpu.c arm: Turn of d-cache before i-cache 2015-09-02 21:28:25 -06:00
Kconfig arm: Add support for HYP mode and LPAE page tables 2016-03-27 09:12:17 -04:00
lowlevel_init.S ARM: SPL: Use CONFIG_SPL_DM not CONFIG_DM 2015-08-12 20:48:07 -04:00
Makefile arm: Replace v7_maint_dcache_all(ARMV7_DCACHE_CLEAN_INVAL_ALL) with asm code 2016-04-11 20:48:26 -04:00
nonsec_virt.S Use correct spelling of "U-Boot" 2016-02-06 12:00:59 +01:00
psci.S ARM: Put target PC for PSCI CPU_ON on per-CPU stack 2015-05-13 09:24:14 -07:00
start.S ARM: Introduce erratum workaround for 801819 2015-08-12 20:47:49 -04:00
syslib.c ARM: OMAP: hide custom bit manipulation function sr32() 2014-04-17 14:39:54 -04:00
virt-dt.c virt-dt: Allow reservation of secure region when in a RAM carveout 2015-05-13 09:24:14 -07:00
virt-v7.c tegra124: Reserve secure RAM using MC_SECURITY_CFG{0, 1}_0 2015-05-13 09:24:15 -07:00