ARM: Various: Future-proof serial platdata

A few boards still use ns16550_platdata structures, but assume the structure
is going to be in a specific order. By explicitly naming each entry,
this should also help 'future-proof' in the event the structure changes.

Tested on the Logic PD Torpedo + Wireless.

I only changed a handful of devices that used the same syntax as the Logic
board.  Appologies if I missed one or stepped on toes.  Thanks to Derald Woods
and Alexander Graf.

Signed-off-by: Adam Ford <aford173@gmail.com>

V6: Add fix to arch/arm/cpu/armv7/am33xx/board.c

V5: Add fix to arch/arm/cpu/arm926ejs/lpc32xx/devices.c

V4: Fix subject heading

V3: Remove  reg_offset out in all the structs. It was reverted out, and and if
it did exist, it would get initialized to 0 by default.

V2: I hastily copy-pasted the boards without looking at the UART number.
This addresses 3 boards that use UART3 and not UART1.
Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This commit is contained in:
Adam Ford 2016-03-07 21:08:49 -06:00 committed by Tom Rini
parent e850ed82bc
commit 2f6ed3b89a
9 changed files with 31 additions and 31 deletions

View File

@ -45,10 +45,10 @@ void lpc32xx_uart_init(unsigned int uart_id)
#if !CONFIG_IS_ENABLED(OF_CONTROL)
static const struct ns16550_platdata lpc32xx_uart[] = {
{ UART3_BASE, 2, CONFIG_SYS_NS16550_CLK },
{ UART4_BASE, 2, CONFIG_SYS_NS16550_CLK },
{ UART5_BASE, 2, CONFIG_SYS_NS16550_CLK },
{ UART6_BASE, 2, CONFIG_SYS_NS16550_CLK },
{ .base = UART3_BASE, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK },
{ .base = UART4_BASE, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK },
{ .base = UART5_BASE, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK },
{ .base = UART6_BASE, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK },
};
#if defined(CONFIG_LPC32XX_HSUART)

View File

@ -40,14 +40,14 @@ DECLARE_GLOBAL_DATA_PTR;
#if !CONFIG_IS_ENABLED(OF_CONTROL)
static const struct ns16550_platdata am33xx_serial[] = {
{ CONFIG_SYS_NS16550_COM1, 2, CONFIG_SYS_NS16550_CLK },
{ .base = CONFIG_SYS_NS16550_COM1, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK },
# ifdef CONFIG_SYS_NS16550_COM2
{ CONFIG_SYS_NS16550_COM2, 2, CONFIG_SYS_NS16550_CLK },
{ .base = CONFIG_SYS_NS16550_COM2, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK },
# ifdef CONFIG_SYS_NS16550_COM3
{ CONFIG_SYS_NS16550_COM3, 2, CONFIG_SYS_NS16550_CLK },
{ CONFIG_SYS_NS16550_COM4, 2, CONFIG_SYS_NS16550_CLK },
{ CONFIG_SYS_NS16550_COM5, 2, CONFIG_SYS_NS16550_CLK },
{ CONFIG_SYS_NS16550_COM6, 2, CONFIG_SYS_NS16550_CLK },
{ .base = CONFIG_SYS_NS16550_COM3, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK },
{ .base = CONFIG_SYS_NS16550_COM4, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK },
{ .base = CONFIG_SYS_NS16550_COM5, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK },
{ .base = CONFIG_SYS_NS16550_COM6, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK },
# endif
# endif
};

View File

@ -34,9 +34,9 @@ static const u32 gpmc_lan_config[] = {
#endif
static const struct ns16550_platdata igep_serial = {
OMAP34XX_UART3,
2,
V_NS16550_CLK
.base = OMAP34XX_UART3,
.reg_shift = 2,
.clock = V_NS16550_CLK
};
U_BOOT_DEVICE(igep_uart) = {

View File

@ -47,9 +47,9 @@ DECLARE_GLOBAL_DATA_PTR;
*/
static const struct ns16550_platdata omap3logic_serial = {
OMAP34XX_UART1,
2,
V_NS16550_CLK
.base = OMAP34XX_UART1,
.reg_shift = 2,
.clock = V_NS16550_CLK
};
U_BOOT_DEVICE(omap3logic_uart) = {

View File

@ -44,9 +44,9 @@ static const u32 gpmc_lab_enet[] = {
};
static const struct ns16550_platdata zoom1_serial = {
OMAP34XX_UART3,
2,
V_NS16550_CLK
.base = OMAP34XX_UART3,
.reg_shift = 2,
.clock = V_NS16550_CLK
};
U_BOOT_DEVICE(zoom1_uart) = {

View File

@ -68,9 +68,9 @@ static struct {
} expansion_config = {0x0};
static const struct ns16550_platdata overo_serial = {
OMAP34XX_UART3,
2,
V_NS16550_CLK
.base = OMAP34XX_UART3,
.reg_shift = 2,
.clock = V_NS16550_CLK
};
U_BOOT_DEVICE(overo_uart) = {

View File

@ -91,9 +91,9 @@ void get_board_mem_timings(struct board_sdrc_timings *timings)
#endif
static const struct ns16550_platdata cairo_serial = {
OMAP34XX_UART2,
2,
V_NS16550_CLK
.base = OMAP34XX_UART2,
.reg_shift = 2,
.clock = V_NS16550_CLK
};
U_BOOT_DEVICE(cairo_uart) = {

View File

@ -73,9 +73,9 @@ static struct {
} expansion_config;
static const struct ns16550_platdata beagle_serial = {
OMAP34XX_UART3,
2,
V_NS16550_CLK
.base = OMAP34XX_UART3,
.reg_shift = 2,
.clock = V_NS16550_CLK
};
U_BOOT_DEVICE(beagle_uart) = {

View File

@ -46,9 +46,9 @@ static u32 gpmc_net_config[GPMC_MAX_REG] = {
};
static const struct ns16550_platdata devkit8000_serial = {
OMAP34XX_UART3,
2,
V_NS16550_CLK
.base = OMAP34XX_UART3,
.reg_shift = 2,
.clock = V_NS16550_CLK
};
U_BOOT_DEVICE(devkit8000_uart) = {