u-boot-brain/include
Wolfgang Denk ee3a55fdf0 Merge branch 'master' of git://git.denx.de/u-boot-arm
* 'master' of git://git.denx.de/u-boot-arm: (167 commits)
  OMAP4/5: Change omap4_sdp, omap4_panda, omap5_evm maintainer
  ARM: omap3: Add CONFIG_SPL_BOARD_INIT for CONFIG_SPL_MMC_SUPPORT
  ARM: omap3: Set SPL stack size to 8KB, image to 54KB.
  arm, omap3: fix warm reset serial output on OMAP36xx/AM/DM37xx
  OMAP4: Set fdt_high for OMAP4 devices to enable booting with Device Tree
  omap4: do not enable auxiliary cores
  omap4: do not enable fs-usb module
  omap4: panda: disable uart2 pads during boot
  igep00x0: change mpurate from 500 to auto
  igep00x0: enable the use of a plain text file
  tegra2: trivially enable 13 mhz crystal frequency
  tegra: Enable keyboard for Seaboard
  tegra: Switch on console mux and use environment for console
  tegra: Add tegra keyboard driver
  tegra: fdt: Add keyboard definitions for Seaboard
  tegra: fdt: Add keyboard controller definition
  tegra: Add keyboard support to funcmux
  input: Add support for keyboard matrix decoding from an fdt
  input: Add generic keyboard input handler
  input: Add linux/input.h for key code support
  fdt: Add fdtdec functions to read byte array
  tegra: Enable LP0 on Seaboard
  tegra: fdt: Add EMC data for Tegra2 Seaboard
  tegra: i2c: Add function to find DVC bus
  fdt: tegra: Add EMC node to device tree
  tegra: Add EMC settings for Seaboard
  tegra: Turn off power detect in board init
  tegra: Set up warmboot code on Nvidia boards
  tegra: Setup PMC scratch info from ap20 setup
  tegra: Add warmboot implementation
  tegra: Set up PMU for Nvidia boards
  tegra: Add PMU to manage power supplies
  tegra: Add EMC support for optimal memory timings
  tegra: Add header file for APB_MISC register
  tegra: Add tegra_get_chip_type() to detect SKU
  tegra: Add flow, gp_padctl, fuse, sdram headers
  tegra: Add crypto library for warmboot code
  tegra: Add functions to access low-level Osc/PLL details
  tegra: Move ap20.h header into arch location
  Add AES crypto library
  i2c: Add TPS6586X driver
  Add abs() macro to return absolute value
  fdt: Add function to return next compatible subnode
  fdt: Add function to locate an array in the device tree
  i.MX28: Avoid redefining serial_put[cs]()
  i.MX28: Check if WP detection is implemented at all
  i.MX28: Add battery boot components to SPL
  i.MX28: Reorder battery status functions in SPL
  i.MX28: Add LRADC init to i.MX28 SPL
  i.MX28: Add LRADC register definitions
  i.MX28: Shut down the LCD controller before reset
  i.MX28: Add LCDIF register definitions
  i.MX28: Implement boot pads sampling and reporting
  i.MX28: Improve passing of data from SPL to U-Boot
  M28EVK: Add SD update command
  M28EVK: Implement support for new board V2.0
  FEC: Abstract out register setup
  MX5: PAD_CTL_DRV_VOT_LOW and PAD_CTL_DRV_VOT_HIGH exchanged
  i.MX28: Add delay after CPU bypass is cleared
  spi: mxs: Allow other chip selects to work
  spi: mxs: Introduce spi_cs_is_valid()
  mx53loco: Remove unneeded gpio_set_value()
  mx53loco: Add CONFIG_REVISION_TAG
  mx53loco: Turn on VUSB regulator
  mx53loco: Add mc34708 support and set mx53 frequency at 1GHz
  pmic: dialog: Avoid name conflicts
  imx: Add u-boot.imx as target for ARM9 i.MX SOCs
  i.MX2: Include asm/types.h in arch-mx25/imx-regs.h
  imx: usb: There is no such register
  i.MX25: usb: Set PORTSCx register
  imx: nand: Support flash based BBT
  i.MX25: This architecture has a GPIO4 too
  i.MX25: esdhc: Add mxc_get_clock infrastructure
  i.MX6: mx6q_sabrelite: add SATA bindings
  i.MX6: add enable_sata_clock()
  i.MX6: Add ANATOP regulator init
  mx28evk: add NAND support
  USB: ehci-mx6: Fix broken IO access
  M28: Scan only first 512 MB of DRAM to avoid memory wraparound
  Revert "i.MX28: Enable additional DRAM address bits"
  M28: Enable FDT support
  mx53loco: Add support for 1GHz operation for DA9053-based boards
  mx53loco: Allow to print CPU information at a later stage
  mx5: Add clock config interface
  imx-common: Factor out get_ahb_clk()
  i.MX6Q: mx6qsabrelite: Add keypress support to alter boot flow
  mx31pdk: Allow booting a zImage kernel
  mx6qarm2: Allow booting a zImage kernel
  mx6qsabrelite: Allow booting a zImage kernel
  mx28evk: Allow booting a zImage kernel
  m28evk: Allow to booting a dt kernel
  mx28evk: Allow to booting a dt kernel
  mx6qsabrelite: No need to set the direction for GPIO3_23 again
  pmic: Add support for the Dialog DA9053 PMIC
  MX53: mx53loco: Add SATA support
  MX53: Add support to ESG ima3 board
  SATA: add driver for MX5 / MX6 SOCs
  MX53: add function to set SATA clock to internal
  SATA: check for return value from sata functions
  MX5: Add definitions for SATA controller
  NET: fec_mxc.c: Add a way to disable auto negotiation
  Define UART4 and UART5 base addresses
  EXYNOS: Change bits per pixel value proper for u-boot.
  EXYNOS: support TRATS board display function
  LCD: support S6E8AX0 amoled driver based on EXYNOS MIPI DSI
  EXYNOS: support EXYNOS MIPI DSI interface driver.
  EXYNOS: support EXYNOS framebuffer and FIMD display drivers.
  LCD: add data structure for EXYNOS display driver
  EXYNOS: add LCD and MIPI DSI clock interface.
  EXYNOS: definitions of system resgister and power management registers.
  SMDK5250: fix compiler warning
  misc:pmic:samsung Convert TRATS target to use MAX8997 instead of MAX8998
  misc:pmic:max8997 MAX8997 support for PMIC driver
  TRATS: modify the trats's configuration
  ARM: Exynos4: ADC: Universal_C210: Enable LDO4 power line for ADC measurement
  EXYNOS: Rename exynos5_tzpc structure to exynos_tzpc
  arm: ea20: Change macro from BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT
  arm: cam_enc_4xx: Change macro from BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT
  cm-t35: add I2C multi-bus support
  include/configs: Remove CONFIG_SYS_64BIT_STRTOUL
  include/configs: Remove CONFIG_SYS_64BIT_VSPRINTF
  omap3: Introduce weak misc_init_r
  omap730p2: Remove empty misc_init_r
  omap5912osk: Remove empty misc_init_r
  omap4+: Remove CONFIG_ARCH_CPU_INIT
  omap4: Remove CONFIG_SYS_MMC_SET_DEV
  OMAP3: pandora: drop console kernel argument
  OMAP3: pandora: revise GPIO configuration
  ...
2012-05-20 21:31:26 +02:00
..
andestech andes_pcu.h: header file of andes_pcu power control unit 2011-11-09 16:35:27 +08:00
asm-generic gpio: Modify common gpio.h to more closely match Linux 2012-01-09 20:10:32 -06:00
bedbug ppc: Fix DBSR_IAx defines in <bedbug/regs.h> 2011-10-09 22:20:44 +02:00
configs Merge branch 'master' of git://git.denx.de/u-boot-arm 2012-05-20 21:31:26 +02:00
cramfs Fix endianess problem in cramfs code (cramfs is always host-endian in Linux) 2008-03-03 22:08:08 +01:00
faraday ftsdc010: add support of ftsdc010 mmc controller 2011-09-04 18:03:02 -05:00
galileo cleanup: Fix typos and misspellings in various files. 2011-07-28 21:27:36 +02:00
jffs2 fdt_support: add partitions fixup in mtd node 2010-03-21 22:44:59 +01:00
linux input: Add linux/input.h for key code support 2012-05-15 08:31:39 +02:00
lzma Rename lib_generic/ to lib/ 2010-04-13 09:13:04 +02:00
mtd cfi_flash: Add optional config register write to cfi-detection 2010-12-17 09:56:05 +01:00
pcmcia Fix IDE stability problems on CPC45 board. 2005-01-22 18:26:04 +00:00
synopsys dwcddr21mctl: Synopsys DWC DDR2/1 Memory Controller 2011-11-09 16:35:27 +08:00
u-boot gunzip: rename z{alloc, free} to gz{alloc, free} 2012-04-30 16:54:51 +02:00
usb lin_gadget: use common linux/compat.h 2012-04-30 16:54:51 +02:00
_exports.h lib, vsprintf: introduce strict_strtoul 2011-05-12 21:07:06 +02:00
.gitignore tools: logo: split bmp arrays from bmp_logo.h 2011-11-15 23:58:26 +01:00
74xx_7xx.h powerpc: Move duplicated BAT defines to mmu.h 2009-02-10 00:27:40 +01:00
ACEX1K.h fpga: constify to fix build warning 2011-08-01 15:19:40 +02:00
addr_map.h Introduce addr_map library 2008-12-15 22:05:36 +01:00
aes.h Add AES crypto library 2012-05-15 08:31:37 +02:00
ahci.h SATA: add driver for MX5 / MX6 SOCs 2012-05-15 08:31:30 +02:00
ali512x.h Convert ISO-8859 files to UTF-8 2011-08-04 23:34:02 +02:00
altera.h fpga: constify to fix build warning 2011-08-01 15:19:40 +02:00
amba_clcd.h video: add amba-clcd prime-cell 2010-01-27 21:23:14 +01:00
ambapp.h Coding Style cleanup; update CHANGELOG 2008-04-13 09:59:26 -07:00
api_public.h api: export LCD device to external apps 2011-11-15 23:58:27 +01:00
arm925t.h [PATCH] omap925.c: Remove unused functions 2006-10-28 17:13:12 +02:00
armcoremodule.h Big white-space cleanup. 2008-05-21 00:14:08 +02:00
asm-offsets.h Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value 2010-10-26 21:05:30 +02:00
at45.h at91: rename DATAFLASH_MMC_SELECT to CONFIG_DATAFLASH_MMC_SELECT 2009-04-04 20:42:19 +02:00
at91rm9200_i2c.h Code Cleanup 2004-10-10 18:03:33 +00:00
at91rm9200_net.h * Move dm9161.c and lxt972.c into cpu/arm920t/at91rm9200 2005-10-05 01:51:29 +02:00
ata.h CPCI750: Add CPCI-HD/2 support 2012-03-18 20:10:02 +01:00
atmel_lcdc.h Add ATMEL LCD driver 2008-05-10 11:44:55 +02:00
atmel_mci.h atmel_mci.h: remove outdated register macros 2012-03-13 14:29:14 +01:00
bcd.h Replace BCD2BIN and BIN2BCD macros with inline functions 2009-08-25 12:57:55 +02:00
bcm5221.h Big white-space cleanup. 2008-05-21 00:14:08 +02:00
bmp_layout.h * Implement new mechanism to export U-Boot's functions to standalone 2003-07-24 23:38:38 +00:00
bootstage.h Move bootstage timer out of lib/time.c 2012-04-10 23:35:32 +02:00
bus_vcxk.h new video driver for bus vcxk framebuffers 2009-07-26 13:17:21 +02:00
bzlib.h * Patches by Xianghua Xiao, 15 Oct 2003: 2003-10-15 23:53:47 +00:00
circbuf.h Add support for Siemens SX1 mobile phone; 2004-03-12 00:14:09 +00:00
clps7111.h Big white-space cleanup. 2008-05-21 00:14:08 +02:00
cmd_spl.h Add cmd_spl command 2012-03-27 22:05:28 +02:00
command.h Add cmd_process() to process commands in one place 2012-03-06 21:09:41 +01:00
common.h Add abs() macro to return absolute value 2012-05-15 08:31:37 +02:00
commproc.h cleanup: Fix typos and misspellings in various files. 2011-07-28 21:27:36 +02:00
compiler.h Define uintptr_t as long int to simplify printf() format strings 2011-11-22 08:39:24 +01:00
config_cmd_all.h AT91: Drop AT91_SPIMUX command from cmd_all 2012-04-19 22:01:12 +02:00
config_cmd_default.h Add 'editenv' command 2009-10-27 20:58:25 +01:00
config_cmd_defaults.h crc32: make command optional 2011-04-13 15:56:43 -04:00
config_defaults.h disk/part.c: Make features optional 2011-07-26 14:10:14 +02:00
config_phylib_all_drivers.h phylib: Enable AR8021 phy support 2011-11-11 07:48:59 -06:00
crc.h Some code cleanup 2006-04-16 10:51:58 +02:00
da9030.h This patch adds USB storage support for the delta board. This is the first 2006-05-22 16:33:54 +02:00
dataflash.h dataflash: fix parameters order in write_dataflash() 2011-11-27 19:46:27 +01:00
ddr_spd.h mpc8xxx: update module_type values from JEDEC DDR3 SPD Specification 2011-11-29 08:48:06 -06:00
dialog_pmic.h pmic: dialog: Avoid name conflicts 2012-05-15 08:31:34 +02:00
div64.h Add a do_div() wrapper macro, lldiv(). 2009-01-24 00:23:09 +01:00
dm9000.h Add config option for disabling DM9000-SROM support. 2009-06-08 22:57:21 -07:00
dm9161.h Big white-space cleanup. 2008-05-21 00:14:08 +02:00
dp83848.h [ARM] TI DaVinci support, hopefully final 2007-08-10 20:26:18 +02:00
ds1722.h Misc ds1722 fixups 2009-09-04 21:54:52 +02:00
ds4510.h Add support for Maxim's DS4510 I2C device 2009-01-24 01:47:50 +01:00
dtt.h hwmon: Provide dtt_init() 2011-10-22 01:22:21 +02:00
e500.h ppc/p4080: Determine various chip frequencies on CoreNet platforms 2009-09-24 12:05:29 -05:00
elf.h compiler.h: unify system ifdef cruft here 2009-07-19 21:41:46 +02:00
environment.h env: remove value from boolean defines 2012-01-05 16:35:54 +01:00
errno.h Add basic errno support. 2010-09-19 19:29:47 +02:00
exports.h Standalone Apps: Standalone apps should need only exports.h. 2011-12-06 20:52:35 +01:00
ext2fs.h ext2: constify file/dir names 2010-12-09 10:24:09 +01:00
fat.h FAT: Add FAT write feature 2011-10-26 21:40:44 +02:00
fdc.h Convert ISO-8859 files to UTF-8 2011-08-04 23:34:02 +02:00
fdt_support.h powerpc/8xxx:Add MPH controller support in USB device-tree fixup 2012-02-15 16:50:14 -06:00
fdt.h powerpc: Fix bootm to boot up again with a Ramdisk 2008-09-13 02:03:38 +02:00
fdtdec.h tegra: Add tegra keyboard driver 2012-05-15 08:31:40 +02:00
fis.h ata: add the fis struct for SATA 2008-03-26 23:38:54 +01:00
flash.h mtd, cfi: introduce void flash_protect_default(void) 2011-04-07 10:20:22 +02:00
fm_eth.h fm-eth: Add ability for board code to disable a port 2011-10-03 08:52:15 -05:00
fpga.h fpga: constify to fix build warning 2011-08-01 15:19:40 +02:00
fsl_diu_fb.h video: Add SHARP LQ084S3LG01 LCD support on P1022DS 2011-08-04 22:55:33 +02:00
fsl_esdhc.h mmc: fsl_esdhc: Poll until card is not busy anymore 2012-05-08 18:02:22 -05:00
fsl_mdio.h Minor coding style cleanup. 2011-05-19 22:22:44 +02:00
fsl_nfc.h Add MX25 support to nand_spl fsl nfc driver 2010-01-27 14:22:41 -06:00
fsl_pmic.h mx53loco: Turn on VUSB regulator 2012-05-15 08:31:34 +02:00
gdsys_fpga.h powerpc/ppc4xx: Remove typedefs for gdsys FPGA 2012-04-30 15:01:29 +02:00
hush.h common: add run_command2 for running simple or hush commands 2011-10-17 22:25:34 +02:00
hwconfig.h powerpc/8xxx: Add hwconfig APIs to address early parsing used by DDR init 2011-01-19 22:58:23 -06:00
i2c.h fix: error ATMEL_FIO_BASE undeclared, if use I2C_Soft on AT91 2012-01-11 08:03:46 +01:00
i8042.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ide.h IDE: fix compiler warnings 2011-04-30 23:29:55 +02:00
image.h image/fit: drop inline markings on parser code 2012-04-30 16:38:54 +02:00
input.h input: Add generic keyboard input handler 2012-05-15 08:31:39 +02:00
iomux.h stdio: constify "name" arg in public api 2010-12-09 10:24:09 +01:00
ioports.h Stop using immap_t for cpm offset on 85xx 2007-12-11 22:34:19 -06:00
ipu_pixfmt.h MX5: Make IPU display output and pixel format configurable 2011-10-17 22:25:32 +02:00
key_matrix.h input: Add support for keyboard matrix decoding from an fdt 2012-05-15 08:31:39 +02:00
keyboard.h [Strange. I _did_ check these in before. Seems SF restored an old 2004-01-16 00:30:56 +00:00
kgdb.h Make sure that argv[] argument pointers are not modified. 2010-07-04 23:55:42 +02:00
ks8721.h Add support for Eukrea CPUAT91 SBC 2009-10-13 06:17:35 -05:00
lattice.h Remove execute permissions from source files 2012-03-04 21:56:15 +01:00
lcd.h LCD: add data structure for EXYNOS display driver 2012-05-15 08:31:29 +02:00
lcdvideo.h Initial revision 2001-11-03 22:15:16 +00:00
led-display.h led_display: remove unused DISPLAY_MARK define 2010-10-21 22:25:04 +02:00
lh7a40x.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
lh7a400.h * Patch by Paul Ruhland, 10 Jun 2004: 2004-06-10 21:55:33 +00:00
lh7a404.h * Patch by Paul Ruhland, 10 Jun 2004: 2004-06-10 21:55:33 +00:00
libata.h ata: update the libata.h from ata.h of linux kernel 2008-04-13 23:20:16 -07:00
libfdt_env.h compiler.h: unify system ifdef cruft here 2009-07-19 21:41:46 +02:00
libfdt.h libfdt: Implement property iteration functions 2011-07-14 21:10:34 -04:00
linux_logo.h Initial revision 2002-09-17 21:37:55 +00:00
lmb.h lmb: only force on arches that use it 2010-01-21 22:26:00 +01:00
logbuff.h Avoid initrd and logbuffer area overlaps 2008-06-03 19:34:19 +02:00
lpd7a400_cpld.h * Patch by Paul Ruhland, 17 May 2004: 2004-06-09 13:37:52 +00:00
lxt971a.h Remove duplicate definitions in include/lxt971a.h. 2008-07-06 23:44:34 -07:00
lynxkdi.h * Patch by Scott McNutt, 21 Jul 2003: 2003-07-27 00:21:01 +00:00
malloc.h Add assert() for debug assertions 2011-09-10 00:04:01 +02:00
max8997_pmic.h misc:pmic:max8997 MAX8997 support for PMIC driver 2012-05-15 08:31:29 +02:00
max8998_pmic.h ARM: Exynos4: ADC: Universal_C210: Enable LDO4 power line for ADC measurement 2012-05-15 08:31:28 +02:00
mb862xx.h video: mb862xx: improve board-specific Lime configuration 2009-10-31 12:13:28 +01:00
mc9sdz60.h Add basic support for Freescale's mc9sdz60 2011-02-02 00:54:43 +01:00
mc13783.h mc13783.h: create and add regulator mode 0 and 1 2012-02-12 10:11:27 +01:00
mc13892.h MC13892: Add REGMODE0 bits definitions 2011-12-06 23:59:39 +01:00
MCD_dma.h ColdFire: Add MCF547x_8x dma code and header files 2008-01-17 14:59:42 -06:00
MCD_progCheck.h ColdFire: Add MCF547x_8x dma code and header files 2008-01-17 14:59:42 -06:00
MCD_tasksInit.h ColdFire: Add MCF547x_8x dma code and header files 2008-01-17 14:59:42 -06:00
menu.h common, menu: show menu on startup if CONFIG_MENU_SHOW is defined 2012-02-12 10:11:24 +01:00
mg_disk.h mflash: Initial mflash support 2009-04-03 23:47:06 +02:00
micrel.h net: phy: add support for Micrel's KSZ9021 2012-02-27 21:19:25 +01:00
mii_phy.h * Code cleanup: 2003-06-27 21:31:46 +00:00
miiphy.h net/miiphy/serial: drop duplicate "NAMESIZE" define 2012-03-18 20:11:22 +01:00
mk48t59.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
mmc.h include/mmc.h: remove struct mmc_csd 2012-05-08 18:02:22 -05:00
mpc5xx.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
mpc5xxx_sdma.h cleanup: Fix typos and misspellings in various files. 2011-07-28 21:27:36 +02:00
mpc5xxx.h A4M072: Added support for the board. 2010-10-12 22:44:33 +02:00
mpc8xx_irq.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
mpc8xx.h Coding stylke cleanup; rebuild CHANGELOG 2007-06-22 23:59:00 +02:00
mpc83xx.h mpc83xx: Cleanup usage of DDR constants 2011-11-03 18:27:55 -05:00
mpc85xx.h powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros 2011-09-29 19:01:04 -05:00
mpc86xx.h powerpc/mpc86xx: Disable translation for BAT setup 2011-10-09 17:57:54 -05:00
mpc106.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
mpc824x.h cleanup: Fix typos and misspellings in various files. 2011-07-28 21:27:36 +02:00
mpc8220.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
mpc8260_irq.h Patches by Murray Jensen, 17 Jun 2003: 2003-06-19 23:40:20 +00:00
mpc8260.h Coding stylke cleanup; rebuild CHANGELOG 2007-06-22 23:59:00 +02:00
mtd_node.h fdt_support: add partitions fixup in mtd node 2010-03-21 22:44:59 +01:00
mvmfp.h gpio: Add Multi-Function-Pin configuration driver for Marvell SoCs 2010-12-16 23:02:43 +01:00
nand.h linux/compat.h: rename from linux/mtd/compat.h 2012-04-30 16:54:51 +02:00
net.h net: force PKTALIGN to ARCH_DMA_MINALIGN 2012-03-29 07:57:10 +02:00
netdev.h net: ll_temac: Add LL TEMAC driver to u-boot 2012-04-04 09:36:19 -05:00
nios2-epcs.h Big white-space cleanup. 2008-05-21 00:14:08 +02:00
nios2-io.h Big white-space cleanup. 2008-05-21 00:14:08 +02:00
nios2-yanu.h nios2: Added support to YANU UART 2010-03-21 22:44:42 +01:00
nios2.h Patches by Scott McNutt, 24 Aug 2004: 2004-10-10 21:27:30 +00:00
nomadik.h include/nomadik.h: add physical address for cldc 2010-01-27 21:23:23 +01:00
ns9750_bbus.h Big white-space cleanup. 2008-05-21 00:14:08 +02:00
ns9750_mem.h Big white-space cleanup. 2008-05-21 00:14:08 +02:00
ns9750_ser.h Big white-space cleanup. 2008-05-21 00:14:08 +02:00
ns9750_sys.h Big white-space cleanup. 2008-05-21 00:14:08 +02:00
ns16550.h NS16550: trivial code clean for checkpatch 2011-10-23 20:19:53 +02:00
ns87308.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
onenand_uboot.h OneNAND: Add simple OneNAND SPL 2011-11-15 22:24:50 +01:00
os.h sandbox: mark os_exit as noreturn 2012-03-12 11:06:48 -04:00
part.h disk/part.c: Make features optional 2011-07-26 14:10:14 +02:00
pc_keyb.h Big white-space cleanup. 2008-05-21 00:14:08 +02:00
pca953x.h Add support for PCA953x I2C gpio devices 2008-12-19 18:11:49 -06:00
pca9564.h Prepare v2010.03-rc1 2010-03-12 23:06:04 +01:00
pca9698.h gpio: Adapt PCA9698 to standard GPIO API 2011-11-18 14:04:25 +01:00
pci_ids.h Update pci_ids.h from current Linux sources 2011-12-09 17:28:29 +01:00
pci.h pci: declare pciauto functions in header 2012-03-30 22:46:00 +02:00
pcmcia.h PXA: Remove PXA PCMCIA support 2012-03-26 23:09:23 +02:00
phy.h net: phy: add support for Micrel's KSZ9021 2012-02-27 21:19:25 +01:00
pmic.h pmic: dialog: Avoid name conflicts 2012-05-15 08:31:34 +02:00
post.h POST: add new memory regions test 2011-10-05 22:03:11 +02:00
ppc_asm.tmpl powerpc: fix wrong comment at GOT definitions 2010-06-29 23:03:40 +02:00
ppc_defs.h Initial revision 2000-07-19 14:09:16 +00:00
ps2mult.h Rename common ns16550 constants with UART_ prefix to prevent conflicts 2009-04-03 22:34:07 +02:00
pwm.h ARM: S5P: pwm driver support 2011-03-27 19:19:54 +02:00
radeon.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
reiserfs.h Code cleanup 2004-03-25 15:14:43 +00:00
rtc.h Switch from per-driver to common definition of bin2bcd and bcd2bin 2009-08-25 12:57:55 +02:00
s_record.h Big white-space cleanup. 2008-05-21 00:14:08 +02:00
s6e63d6.h A driver for the S6E63D6 SPI display controller from Samsung 2009-02-24 10:00:28 +01:00
SA-1100.h Big white-space cleanup. 2008-05-21 00:14:08 +02:00
sata.h SATA: do not auto-initialize during boot 2009-01-27 23:42:39 +01:00
scsi.h scsi/ahci: add support for non-PCI controllers 2011-07-26 00:06:58 +02:00
sdhci.h mmc: add the quirk to use the sdhci for samsung-soc 2012-05-08 18:02:22 -05:00
search.h env: allow to export only selected variables 2011-11-08 13:20:42 +01:00
sed156x.h * Patches by Pantelis Antoniou, 30 Mar 2004: 2004-04-15 21:16:42 +00:00
sed13806.h Convert ISO-8859 files to UTF-8 2011-08-04 23:34:02 +02:00
serial.h net/miiphy/serial: drop duplicate "NAMESIZE" define 2012-03-18 20:11:22 +01:00
sha1.h Add support for calculating hashes with watchdog triggering 2008-04-25 00:01:06 +02:00
sha256.h include/sha256.h: fix file permissions. 2008-07-06 01:21:46 +02:00
sja1000.h Add minimal SJA1000 header for basic CAN mode 2009-11-17 13:19:58 +01:00
sm501.h Convert ISO-8859 files to UTF-8 2011-08-04 23:34:02 +02:00
smiLynxEM.h * Code cleanup: 2003-06-27 21:31:46 +00:00
spartan2.h fpga: constify to fix build warning 2011-08-01 15:19:40 +02:00
spartan3.h fpga: add definition for Xilinx Spartan-6 XC6SLX4 2012-01-05 16:18:30 +01:00
spd_sdram.h Support for DDR with 32-data path. Addotional notes on injecting 2006-03-16 17:46:46 +01:00
spd.h Fix style issues primarily in 85xx and 83xx boards. 2005-08-01 13:20:47 -05:00
spi_flash.h sf: Add spi_boot() to allow booting from SPI flash in an SPL 2011-12-24 10:23:30 +01:00
spi.h powerpc: eSPI and eSPI controller support 2011-04-29 07:34:09 -05:00
status_led.h sbc82xx: delete support for obsolete SBC8240/SBC8260 2011-10-01 21:57:13 +02:00
stdio_dev.h ARM: drop unsupported 'trab' board 2011-06-22 20:00:51 +02:00
stratixII.h fpga: Remove relocation fixups 2009-10-03 10:17:56 +02:00
sym53c8xx.h Big white-space cleanup. 2008-05-21 00:14:08 +02:00
systemace.h * CVS add missing files 2004-02-23 16:11:30 +00:00
tegra-kbc.h tegra: Add tegra keyboard driver 2012-05-15 08:31:40 +02:00
timestamp.h Move timestamp and version files into 'generated' subdir 2011-10-17 23:57:00 +02:00
tpm.h Introduce generic TPM support in u-boot 2011-12-07 08:45:51 +01:00
tps6586x.h i2c: Add TPS6586X driver 2012-05-15 08:31:37 +02:00
tsec.h tsec: Fix MDIO on devices with eTSEC2 2011-04-29 07:32:48 -05:00
tsi108.h Clean up the code according to codestyle: 2006-12-01 11:47:36 +08:00
tsi148.h Add support for the Tundra TSI148 VME-bridge 2009-07-19 11:21:08 +02:00
twl4030.h omap: TWL4030 Bump VMMC1 interface voltage from 3V to 3.15V 2011-12-09 17:28:28 +01:00
twl6030.h mmc: omap: config VMMC, MMC1_PBIAS 2011-09-30 22:00:55 +02:00
twl6035.h omap5: pbias ldo9 turn on 2012-05-15 08:31:25 +02:00
tws.h drivers/twserial: Add protocol driver for "three wire serial" interface. 2009-03-30 09:38:36 +02:00
ubi_uboot.h common: move BUILD_BUG_ON define to common.h 2011-07-27 23:45:37 +02:00
universe.h Code cleanup. 2004-12-16 21:44:03 +00:00
usb_cdc_acm.h Code cleanup 2006-06-14 18:14:56 +02:00
usb_defs.h Prepare USB layer for ehci 2009-01-28 19:57:27 +01:00
usb_ether.h Add support for SMSC95XX USB 2.0 10/100MBit Ethernet Adapter 2011-08-08 21:05:23 +02:00
usb.h usb: replace wait_ms() with mdelay() 2012-03-19 00:08:16 +01:00
usbdescriptors.h Enable high speed support for USB device framework and usbtty 2012-03-28 16:31:08 +02:00
usbdevice.h Enable high speed support for USB device framework and usbtty 2012-03-28 16:31:08 +02:00
version.h Move timestamp and version files into 'generated' subdir 2011-10-17 23:57:00 +02:00
video_ad7176.h * Patches by Yuli Barcohen, 13 Jul 2003: 2003-07-14 22:13:32 +00:00
video_ad7177.h * Patches by Yuli Barcohen, 13 Jul 2003: 2003-07-14 22:13:32 +00:00
video_ad7179.h * Add support for IceCube board (with MGT5100 and MPC5200 CPUs) 2003-07-16 21:53:01 +00:00
video_easylogo.h Big white-space cleanup. 2008-05-21 00:14:08 +02:00
video_fb.h video: cleanup comments in cfb_console.c and video_fb.h 2010-07-17 00:05:14 +02:00
video_font_data.h font: split font data from video_font.h 2011-11-15 23:58:26 +01:00
video_font.h font: split font data from video_font.h 2011-11-15 23:58:26 +01:00
video_logo.h Big white-space cleanup. 2008-05-21 00:14:08 +02:00
video.h Initial revision 2001-11-03 22:21:15 +00:00
virtex2.h fpga: constify to fix build warning 2011-08-01 15:19:40 +02:00
vsc7385.h Cleanup coding style, update CHANGELOG 2008-03-26 11:48:46 +01:00
vsprintf.h vsprintf: Move function documentation into header file 2011-12-17 23:34:01 +01:00
vxworks.h Make sure that argv[] argument pointers are not modified. 2010-07-04 23:55:42 +02:00
w83c553f.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
watchdog.h nios: remove nios-32 arch 2010-05-28 10:56:04 -04:00
xilinx.h fpga: constify to fix build warning 2011-08-01 15:19:40 +02:00
xyzModem.h More code cleanup 2006-07-21 15:24:56 +02:00