mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 00:48:52 +09:00
![Simon Glass](/assets/img/avatar_default.png)
Move this option to Kconfig and update all boards. Signed-off-by: Simon Glass <sjg@chromium.org>
459 lines
13 KiB
Plaintext
459 lines
13 KiB
Plaintext
menu "x86 architecture"
|
|
depends on X86
|
|
|
|
config SYS_ARCH
|
|
default "x86"
|
|
|
|
config USE_PRIVATE_LIBGCC
|
|
default y
|
|
|
|
choice
|
|
prompt "Target select"
|
|
|
|
config TARGET_COREBOOT
|
|
bool "Support coreboot"
|
|
help
|
|
This target is used for running U-Boot on top of Coreboot. In
|
|
this case Coreboot does the early inititalisation, and U-Boot
|
|
takes over once the RAM, video and CPU are fully running.
|
|
U-Boot is loaded as a fallback payload from Coreboot, in
|
|
Coreboot terminology. This method was used for the Chromebook
|
|
Pixel when launched.
|
|
|
|
config TARGET_CHROMEBOOK_LINK
|
|
bool "Support Chromebook link"
|
|
help
|
|
This is the Chromebook Pixel released in 2013. It uses an Intel
|
|
i5 Ivybridge which is a die-shrink of Sandybridge, with 4GB of
|
|
SDRAM. It has a Panther Point platform controller hub, PCIe
|
|
WiFi and Bluetooth. It also includes a 720p webcam, USB SD
|
|
reader, microphone and speakers, display port and 32GB SATA
|
|
solid state drive. There is a Chrome OS EC connected on LPC,
|
|
and it provides a 2560x1700 high resolution touch-enabled LCD
|
|
display.
|
|
|
|
config TARGET_CROWNBAY
|
|
bool "Support Intel Crown Bay CRB"
|
|
help
|
|
This is the Intel Crown Bay Customer Reference Board. It contains
|
|
the Intel Atom Processor E6xx populated on the COM Express module
|
|
with 1GB DDR2 soldered down memory and a carrier board with the
|
|
Intel Platform Controller Hub EG20T, other system components and
|
|
peripheral connectors for PCIe/SATA/USB/LAN/SD/UART/Audio/LVDS.
|
|
|
|
config TARGET_MINNOWMAX
|
|
bool "Support Intel Minnowboard MAX"
|
|
help
|
|
This is the Intel Minnowboard MAX. It contains an Atom E3800
|
|
processor in a small form factor with Ethernet, micro-SD, USB 2,
|
|
USB 3, SATA, serial console, some GPIOs and HDMI 1.3 video out.
|
|
It requires some binary blobs - see README.x86 for details.
|
|
|
|
Note that PCIE_ECAM_BASE is set up by the FSP so the value used
|
|
by U-Boot matches that value.
|
|
|
|
config TARGET_GALILEO
|
|
bool "Support Intel Galileo"
|
|
help
|
|
This is the Intel Galileo board, which is the first in a family of
|
|
Arduino-certified development and prototyping boards based on Intel
|
|
architecture. It includes an Intel Quark SoC X1000 processor, a 32-bit
|
|
single-core, single-thread, Intel Pentium processor instrunction set
|
|
architecture (ISA) compatible, operating at speeds up to 400Mhz,
|
|
along with 256MB DDR3 memory. It supports a wide range of industry
|
|
standard I/O interfaces, including a full-sized mini-PCIe slot,
|
|
one 100Mb Ethernet port, a microSD card slot, a USB host port and
|
|
a USB client port.
|
|
|
|
endchoice
|
|
|
|
config DM
|
|
default y
|
|
|
|
config DM_GPIO
|
|
default y
|
|
|
|
config DM_SERIAL
|
|
default y
|
|
|
|
config SYS_MALLOC_F
|
|
default y
|
|
|
|
config SYS_MALLOC_F_LEN
|
|
default 0x800
|
|
|
|
config RAMBASE
|
|
hex
|
|
default 0x100000
|
|
|
|
config XIP_ROM_SIZE
|
|
hex
|
|
depends on X86_RESET_VECTOR
|
|
default ROM_SIZE
|
|
|
|
config CPU_ADDR_BITS
|
|
int
|
|
default 36
|
|
|
|
config HPET_ADDRESS
|
|
hex
|
|
default 0xfed00000 if !HPET_ADDRESS_OVERRIDE
|
|
|
|
config SMM_TSEG
|
|
bool
|
|
default n
|
|
|
|
config SMM_TSEG_SIZE
|
|
hex
|
|
|
|
config X86_RESET_VECTOR
|
|
bool
|
|
default n
|
|
|
|
config SYS_X86_START16
|
|
hex
|
|
depends on X86_RESET_VECTOR
|
|
default 0xfffff800
|
|
|
|
config BOARD_ROMSIZE_KB_512
|
|
bool
|
|
config BOARD_ROMSIZE_KB_1024
|
|
bool
|
|
config BOARD_ROMSIZE_KB_2048
|
|
bool
|
|
config BOARD_ROMSIZE_KB_4096
|
|
bool
|
|
config BOARD_ROMSIZE_KB_8192
|
|
bool
|
|
config BOARD_ROMSIZE_KB_16384
|
|
bool
|
|
|
|
choice
|
|
prompt "ROM chip size"
|
|
depends on X86_RESET_VECTOR
|
|
default UBOOT_ROMSIZE_KB_512 if BOARD_ROMSIZE_KB_512
|
|
default UBOOT_ROMSIZE_KB_1024 if BOARD_ROMSIZE_KB_1024
|
|
default UBOOT_ROMSIZE_KB_2048 if BOARD_ROMSIZE_KB_2048
|
|
default UBOOT_ROMSIZE_KB_4096 if BOARD_ROMSIZE_KB_4096
|
|
default UBOOT_ROMSIZE_KB_8192 if BOARD_ROMSIZE_KB_8192
|
|
default UBOOT_ROMSIZE_KB_16384 if BOARD_ROMSIZE_KB_16384
|
|
help
|
|
Select the size of the ROM chip you intend to flash U-Boot on.
|
|
|
|
The build system will take care of creating a u-boot.rom file
|
|
of the matching size.
|
|
|
|
config UBOOT_ROMSIZE_KB_512
|
|
bool "512 KB"
|
|
help
|
|
Choose this option if you have a 512 KB ROM chip.
|
|
|
|
config UBOOT_ROMSIZE_KB_1024
|
|
bool "1024 KB (1 MB)"
|
|
help
|
|
Choose this option if you have a 1024 KB (1 MB) ROM chip.
|
|
|
|
config UBOOT_ROMSIZE_KB_2048
|
|
bool "2048 KB (2 MB)"
|
|
help
|
|
Choose this option if you have a 2048 KB (2 MB) ROM chip.
|
|
|
|
config UBOOT_ROMSIZE_KB_4096
|
|
bool "4096 KB (4 MB)"
|
|
help
|
|
Choose this option if you have a 4096 KB (4 MB) ROM chip.
|
|
|
|
config UBOOT_ROMSIZE_KB_8192
|
|
bool "8192 KB (8 MB)"
|
|
help
|
|
Choose this option if you have a 8192 KB (8 MB) ROM chip.
|
|
|
|
config UBOOT_ROMSIZE_KB_16384
|
|
bool "16384 KB (16 MB)"
|
|
help
|
|
Choose this option if you have a 16384 KB (16 MB) ROM chip.
|
|
|
|
endchoice
|
|
|
|
# Map the config names to an integer (KB).
|
|
config UBOOT_ROMSIZE_KB
|
|
int
|
|
default 512 if UBOOT_ROMSIZE_KB_512
|
|
default 1024 if UBOOT_ROMSIZE_KB_1024
|
|
default 2048 if UBOOT_ROMSIZE_KB_2048
|
|
default 4096 if UBOOT_ROMSIZE_KB_4096
|
|
default 8192 if UBOOT_ROMSIZE_KB_8192
|
|
default 16384 if UBOOT_ROMSIZE_KB_16384
|
|
|
|
# Map the config names to a hex value (bytes).
|
|
config ROM_SIZE
|
|
hex
|
|
default 0x80000 if UBOOT_ROMSIZE_KB_512
|
|
default 0x100000 if UBOOT_ROMSIZE_KB_1024
|
|
default 0x200000 if UBOOT_ROMSIZE_KB_2048
|
|
default 0x400000 if UBOOT_ROMSIZE_KB_4096
|
|
default 0x800000 if UBOOT_ROMSIZE_KB_8192
|
|
default 0xc00000 if UBOOT_ROMSIZE_KB_12288
|
|
default 0x1000000 if UBOOT_ROMSIZE_KB_16384
|
|
|
|
config HAVE_INTEL_ME
|
|
bool "Platform requires Intel Management Engine"
|
|
help
|
|
Newer higher-end devices have an Intel Management Engine (ME)
|
|
which is a very large binary blob (typically 1.5MB) which is
|
|
required for the platform to work. This enforces a particular
|
|
SPI flash format. You will need to supply the me.bin file in
|
|
your board directory.
|
|
|
|
config X86_RAMTEST
|
|
bool "Perform a simple RAM test after SDRAM initialisation"
|
|
help
|
|
If there is something wrong with SDRAM then the platform will
|
|
often crash within U-Boot or the kernel. This option enables a
|
|
very simple RAM test that quickly checks whether the SDRAM seems
|
|
to work correctly. It is not exhaustive but can save time by
|
|
detecting obvious failures.
|
|
|
|
config MARK_GRAPHICS_MEM_WRCOMB
|
|
bool "Mark graphics memory as write-combining."
|
|
default n
|
|
help
|
|
The graphics performance may increase if the graphics
|
|
memory is set as write-combining cache type. This option
|
|
enables marking the graphics memory as write-combining.
|
|
|
|
menu "Display"
|
|
|
|
config FRAMEBUFFER_SET_VESA_MODE
|
|
prompt "Set framebuffer graphics resolution"
|
|
bool
|
|
help
|
|
Set VESA/native framebuffer mode (needed for bootsplash and graphical framebuffer console)
|
|
|
|
choice
|
|
prompt "framebuffer graphics resolution"
|
|
default FRAMEBUFFER_VESA_MODE_117
|
|
depends on FRAMEBUFFER_SET_VESA_MODE
|
|
help
|
|
This option sets the resolution used for the coreboot framebuffer (and
|
|
bootsplash screen).
|
|
|
|
config FRAMEBUFFER_VESA_MODE_100
|
|
bool "640x400 256-color"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_101
|
|
bool "640x480 256-color"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_102
|
|
bool "800x600 16-color"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_103
|
|
bool "800x600 256-color"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_104
|
|
bool "1024x768 16-color"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_105
|
|
bool "1024x7686 256-color"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_106
|
|
bool "1280x1024 16-color"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_107
|
|
bool "1280x1024 256-color"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_108
|
|
bool "80x60 text"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_109
|
|
bool "132x25 text"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_10A
|
|
bool "132x43 text"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_10B
|
|
bool "132x50 text"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_10C
|
|
bool "132x60 text"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_10D
|
|
bool "320x200 32k-color (1:5:5:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_10E
|
|
bool "320x200 64k-color (5:6:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_10F
|
|
bool "320x200 16.8M-color (8:8:8)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_110
|
|
bool "640x480 32k-color (1:5:5:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_111
|
|
bool "640x480 64k-color (5:6:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_112
|
|
bool "640x480 16.8M-color (8:8:8)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_113
|
|
bool "800x600 32k-color (1:5:5:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_114
|
|
bool "800x600 64k-color (5:6:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_115
|
|
bool "800x600 16.8M-color (8:8:8)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_116
|
|
bool "1024x768 32k-color (1:5:5:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_117
|
|
bool "1024x768 64k-color (5:6:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_118
|
|
bool "1024x768 16.8M-color (8:8:8)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_119
|
|
bool "1280x1024 32k-color (1:5:5:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_11A
|
|
bool "1280x1024 64k-color (5:6:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_11B
|
|
bool "1280x1024 16.8M-color (8:8:8)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_USER
|
|
bool "Manually select VESA mode"
|
|
|
|
endchoice
|
|
|
|
# Map the config names to an integer (KB).
|
|
config FRAMEBUFFER_VESA_MODE
|
|
prompt "VESA mode" if FRAMEBUFFER_VESA_MODE_USER
|
|
hex
|
|
default 0x100 if FRAMEBUFFER_VESA_MODE_100
|
|
default 0x101 if FRAMEBUFFER_VESA_MODE_101
|
|
default 0x102 if FRAMEBUFFER_VESA_MODE_102
|
|
default 0x103 if FRAMEBUFFER_VESA_MODE_103
|
|
default 0x104 if FRAMEBUFFER_VESA_MODE_104
|
|
default 0x105 if FRAMEBUFFER_VESA_MODE_105
|
|
default 0x106 if FRAMEBUFFER_VESA_MODE_106
|
|
default 0x107 if FRAMEBUFFER_VESA_MODE_107
|
|
default 0x108 if FRAMEBUFFER_VESA_MODE_108
|
|
default 0x109 if FRAMEBUFFER_VESA_MODE_109
|
|
default 0x10A if FRAMEBUFFER_VESA_MODE_10A
|
|
default 0x10B if FRAMEBUFFER_VESA_MODE_10B
|
|
default 0x10C if FRAMEBUFFER_VESA_MODE_10C
|
|
default 0x10D if FRAMEBUFFER_VESA_MODE_10D
|
|
default 0x10E if FRAMEBUFFER_VESA_MODE_10E
|
|
default 0x10F if FRAMEBUFFER_VESA_MODE_10F
|
|
default 0x110 if FRAMEBUFFER_VESA_MODE_110
|
|
default 0x111 if FRAMEBUFFER_VESA_MODE_111
|
|
default 0x112 if FRAMEBUFFER_VESA_MODE_112
|
|
default 0x113 if FRAMEBUFFER_VESA_MODE_113
|
|
default 0x114 if FRAMEBUFFER_VESA_MODE_114
|
|
default 0x115 if FRAMEBUFFER_VESA_MODE_115
|
|
default 0x116 if FRAMEBUFFER_VESA_MODE_116
|
|
default 0x117 if FRAMEBUFFER_VESA_MODE_117
|
|
default 0x118 if FRAMEBUFFER_VESA_MODE_118
|
|
default 0x119 if FRAMEBUFFER_VESA_MODE_119
|
|
default 0x11A if FRAMEBUFFER_VESA_MODE_11A
|
|
default 0x11B if FRAMEBUFFER_VESA_MODE_11B
|
|
default 0x117 if FRAMEBUFFER_VESA_MODE_USER
|
|
|
|
endmenu
|
|
|
|
config HAVE_FSP
|
|
bool "Add an Firmware Support Package binary"
|
|
help
|
|
Select this option to add an Firmware Support Package binary to
|
|
the resulting U-Boot image. It is a binary blob which U-Boot uses
|
|
to set up SDRAM and other chipset specific initialization.
|
|
|
|
Note: Without this binary U-Boot will not be able to set up its
|
|
SDRAM so will not boot.
|
|
|
|
config FSP_FILE
|
|
string "Firmware Support Package binary filename"
|
|
depends on HAVE_FSP
|
|
default "fsp.bin"
|
|
help
|
|
The filename of the file to use as Firmware Support Package binary
|
|
in the board directory.
|
|
|
|
config FSP_ADDR
|
|
hex "Firmware Support Package binary location"
|
|
depends on HAVE_FSP
|
|
default 0xfffc0000
|
|
help
|
|
FSP is not Position Independent Code (PIC) and the whole FSP has to
|
|
be rebased if it is placed at a location which is different from the
|
|
perferred base address specified during the FSP build. Use Intel's
|
|
Binary Configuration Tool (BCT) to do the rebase.
|
|
|
|
The default base address of 0xfffc0000 indicates that the binary must
|
|
be located at offset 0xc0000 from the beginning of a 1MB flash device.
|
|
|
|
config FSP_TEMP_RAM_ADDR
|
|
hex
|
|
default 0x2000000
|
|
help
|
|
Stack top address which is used in FspInit after DRAM is ready and
|
|
CAR is disabled.
|
|
|
|
source "arch/x86/cpu/baytrail/Kconfig"
|
|
|
|
source "arch/x86/cpu/coreboot/Kconfig"
|
|
|
|
source "arch/x86/cpu/ivybridge/Kconfig"
|
|
|
|
source "arch/x86/cpu/quark/Kconfig"
|
|
|
|
source "arch/x86/cpu/queensbay/Kconfig"
|
|
|
|
config TSC_CALIBRATION_BYPASS
|
|
bool "Bypass Time-Stamp Counter (TSC) calibration"
|
|
default n
|
|
help
|
|
By default U-Boot automatically calibrates Time-Stamp Counter (TSC)
|
|
running frequency via Model-Specific Register (MSR) and Programmable
|
|
Interval Timer (PIT). If the calibration does not work on your board,
|
|
select this option and provide a hardcoded TSC running frequency with
|
|
CONFIG_TSC_FREQ_IN_MHZ below.
|
|
|
|
Normally this option should be turned on in a simulation environment
|
|
like qemu.
|
|
|
|
config TSC_FREQ_IN_MHZ
|
|
int "Time-Stamp Counter (TSC) running frequency in MHz"
|
|
depends on TSC_CALIBRATION_BYPASS
|
|
default 1000
|
|
help
|
|
The running frequency in MHz of Time-Stamp Counter (TSC).
|
|
|
|
source "board/coreboot/coreboot/Kconfig"
|
|
|
|
source "board/google/chromebook_link/Kconfig"
|
|
|
|
source "board/intel/crownbay/Kconfig"
|
|
|
|
source "board/intel/minnowmax/Kconfig"
|
|
|
|
source "board/intel/galileo/Kconfig"
|
|
|
|
config PCIE_ECAM_BASE
|
|
hex
|
|
default 0xe0000000
|
|
help
|
|
This is the memory-mapped address of PCI configuration space, which
|
|
is only available through the Enhanced Configuration Access
|
|
Mechanism (ECAM) with PCI Express. It can be set up almost
|
|
anywhere. Before it is set up, it is possible to access PCI
|
|
configuration space through I/O access, but memory access is more
|
|
convenient. Using this, PCI can be scanned and configured. This
|
|
should be set to a region that does not conflict with memory
|
|
assigned to PCI devices - i.e. the memory and prefetch regions, as
|
|
passed to pci_set_region().
|
|
|
|
endmenu
|