dm: Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to Kconfig

Move this option to Kconfig and update all boards.
Signed-off-by: Simon Glass <sjg@chromium.org>
This commit is contained in:
Simon Glass 2015-02-11 16:32:59 -07:00
parent ad885e4570
commit b724bd7d63
47 changed files with 97 additions and 24 deletions

19
Kconfig
View File

@ -56,6 +56,25 @@ config CC_OPTIMIZE_FOR_SIZE
This option is enabled by default for U-Boot.
config SYS_MALLOC_F
bool "Enable malloc() pool before relocation"
default 0x400
help
Before relocation memory is very limited on many platforms. Still,
we can provide a small malloc() pool if needed. Driver model in
particular needs this to operate, so that it can allocate the
initial serial device and any others that are needed.
config SYS_MALLOC_F_LEN
hex "Size of malloc() pool before relocation"
depends on SYS_MALLOC_F
default 0x400
help
Before relocation memory is very limited on many platforms. Still,
we can provide a small malloc() pool if needed. Driver model in
particular needs this to operate, so that it can allocate the
initial serial device and any others that are needed.
menuconfig EXPERT
bool "Configure standard U-Boot features (expert users)"
help

View File

@ -80,6 +80,12 @@ config DM_SPI_FLASH
config DM_GPIO
default y if !SPL_BUILD
config SYS_MALLOC_F
default y if !SPL_BUILD
config SYS_MALLOC_F_LEN
default 0x400 if !SPL_BUILD
source "board/samsung/smdkv310/Kconfig"
source "board/samsung/trats/Kconfig"
source "board/samsung/universal_c210/Kconfig"

View File

@ -102,6 +102,12 @@ config DM_GPIO
config DM_SERIAL
default y if DM && !SPL_BUILD
config SYS_MALLOC_F
default y if DM && !SPL_BUILD
config SYS_MALLOC_F_LEN
default 0x400 if DM && !SPL_BUILD
config SYS_SOC
default "omap3"

View File

@ -17,6 +17,12 @@ config TEGRA124
endchoice
config SYS_MALLOC_F
default y
config SYS_MALLOC_F_LEN
default 0x1800
config USE_PRIVATE_LIBGCC
default y if SPL_BUILD

View File

@ -48,6 +48,12 @@ config DCC_MICRO_SUPPORT_CARD
endchoice
config SYS_MALLOC_F
default y
config SYS_MALLOC_F_LEN
default 0x2000
config CMD_PINMON
bool "Enable boot mode pins monitor command"
default y

View File

@ -76,6 +76,12 @@ config DM_GPIO
config DM_SERIAL
default y
config SYS_MALLOC_F
default y
config SYS_MALLOC_F_LEN
default 0x800
config RAMBASE
hex
default 0x100000

View File

@ -47,4 +47,10 @@ config DM_GPIO
config DM_SERIAL
default y if DM && !SPL_BUILD
config SYS_MALLOC_F
default y if DM && !SPL_BUILD
config SYS_MALLOC_F_LEN
default 0x400 if DM && !SPL_BUILD
endif

View File

@ -13,3 +13,5 @@ CONFIG_OF_SEPARATE=y
+S:CONFIG_DRAM_CLK=480
+S:CONFIG_DRAM_ZQ=122
+S:CONFIG_DRAM_EMR1=4
CONFIG_SYS_MALLOC_F=y
CONFIG_SYS_MALLOC_F_LEN=0x400

View File

@ -1,3 +1,5 @@
CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_AM335X_IGEP0033=y
CONFIG_SYS_MALLOC_F=y
CONFIG_SYS_MALLOC_F_LEN=0x400

View File

@ -5,3 +5,5 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL,SPL"
CONFIG_DM=y
CONFIG_DM_GPIO=y
CONFIG_DM_SERIAL=y
CONFIG_SYS_MALLOC_F=y
CONFIG_SYS_MALLOC_F_LEN=0x400

View File

@ -1,3 +1,5 @@
CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_CM_T335=y
CONFIG_SYS_MALLOC_F=y
CONFIG_SYS_MALLOC_F_LEN=0x400

View File

@ -2,3 +2,5 @@ CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL"
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_GW_VENTANA=y
CONFIG_SYS_MALLOC_F=y
CONFIG_SYS_MALLOC_F_LEN=0x400

View File

@ -1,3 +1,5 @@
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6dl.cfg,MX6DL"
CONFIG_ARM=y
CONFIG_TARGET_MX6QSABREAUTO=y
CONFIG_SYS_MALLOC_F=y
CONFIG_SYS_MALLOC_F_LEN=0x400

View File

@ -1,3 +1,5 @@
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg,MX6Q"
CONFIG_ARM=y
CONFIG_TARGET_MX6QSABREAUTO=y
CONFIG_SYS_MALLOC_F=y
CONFIG_SYS_MALLOC_F_LEN=0x400

View File

@ -1,3 +1,5 @@
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg,MX6Q"
CONFIG_ARM=y
CONFIG_TARGET_MX6SABRESD=y
CONFIG_SYS_MALLOC_F=y
CONFIG_SYS_MALLOC_F_LEN=0x400

View File

@ -1,3 +1,5 @@
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabresd/imximage.cfg,MX6SX"
CONFIG_ARM=y
CONFIG_TARGET_MX6SXSABRESD=y
CONFIG_SYS_MALLOC_F=y
CONFIG_SYS_MALLOC_F_LEN=0x400

View File

@ -4,3 +4,5 @@ CONFIG_TARGET_NOKIA_RX51=y
CONFIG_DM=n
CONFIG_DM_SERIAL=n
CONFIG_DM_GPIO=n
CONFIG_SYS_MALLOC_F=y
CONFIG_SYS_MALLOC_F_LEN=0x400

View File

@ -2,3 +2,5 @@ CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="REV1"
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_PCM051=y
CONFIG_SYS_MALLOC_F=y
CONFIG_SYS_MALLOC_F_LEN=0x400

View File

@ -2,3 +2,5 @@ CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="REV3"
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_PCM051=y
CONFIG_SYS_MALLOC_F=y
CONFIG_SYS_MALLOC_F_LEN=0x400

View File

@ -1,3 +1,5 @@
CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_PENGWYN=y
CONFIG_SYS_MALLOC_F=y
CONFIG_SYS_MALLOC_F_LEN=0x400

View File

@ -1,3 +1,5 @@
CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_PEPPER=y
CONFIG_SYS_MALLOC_F=y
CONFIG_SYS_MALLOC_F_LEN=0x400

View File

@ -1,2 +1,4 @@
CONFIG_ARM=y
CONFIG_TARGET_RPI=y
CONFIG_SYS_MALLOC_F=y
CONFIG_SYS_MALLOC_F_LEN=0x400

View File

@ -2,3 +2,5 @@ CONFIG_ARM=y
CONFIG_ARCH_S5PC1XX=y
CONFIG_TARGET_S5P_GONI=y
CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-goni"
CONFIG_SYS_MALLOC_F=y
CONFIG_SYS_MALLOC_F_LEN=0x400

View File

@ -5,3 +5,5 @@ CONFIG_FIT_VERBOSE=y
CONFIG_FIT_SIGNATURE=y
CONFIG_DM=y
CONFIG_DEFAULT_DEVICE_TREE="sandbox"
CONFIG_SYS_MALLOC_F=y
CONFIG_SYS_MALLOC_F_LEN=0x400

View File

@ -2,3 +2,5 @@ CONFIG_ARM=y
CONFIG_TARGET_SMDKC100=y
CONFIG_ARCH_S5PC1XX=y
CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-smdkc100"
CONFIG_SYS_MALLOC_F=y
CONFIG_SYS_MALLOC_F_LEN=0x400

View File

@ -4,3 +4,5 @@ CONFIG_TARGET_SNAPPER9260=y
CONFIG_DM=y
CONFIG_DM_GPIO=y
CONFIG_DM_SERIAL=y
CONFIG_SYS_MALLOC_F=y
CONFIG_SYS_MALLOC_F_LEN=0x400

View File

@ -4,3 +4,5 @@ CONFIG_TARGET_SNAPPER9260=y
CONFIG_DM=y
CONFIG_DM_GPIO=y
CONFIG_DM_SERIAL=y
CONFIG_SYS_MALLOC_F=y
CONFIG_SYS_MALLOC_F_LEN=0x400

View File

@ -1,3 +1,5 @@
CONFIG_SYS_EXTRA_OPTIONS="stv0991"
CONFIG_ARM=y
CONFIG_TARGET_STV0991=y
CONFIG_SYS_MALLOC_F=y
CONFIG_SYS_MALLOC_F_LEN=0x2000

View File

@ -21,10 +21,7 @@
#define CONFIG_MACH_TYPE 4273
#ifndef CONFIG_SPL_BUILD
#define CONFIG_CMD_GPIO
#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#endif
/* Display information on boot */

View File

@ -36,7 +36,6 @@
#define CONFIG_ENV_OVERWRITE
/* Size of malloc() pool before and after relocation */
#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 << 20))
/* select serial console configuration */

View File

@ -39,7 +39,6 @@
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
/* Init Functions */
#define CONFIG_BOARD_EARLY_INIT_F

View File

@ -27,7 +27,6 @@
#define CONFIG_DM
#define CONFIG_DM_THERMAL
#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#define CONFIG_IMX6_THERMAL
#define CONFIG_SYS_GENERIC_BOARD

View File

@ -229,7 +229,6 @@
#define CONFIG_DM
#define CONFIG_DM_THERMAL
#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#define CONFIG_IMX6_THERMAL
#define CONFIG_CMD_FUSE

View File

@ -72,7 +72,6 @@
#define CONFIG_UBI_SIZE (512 << 10)
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + CONFIG_UBI_SIZE + \
(128 << 10))
#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
/*
* Hardware drivers

View File

@ -116,7 +116,6 @@
#define CONFIG_SYS_MEMTEST_END 0x20000000
#define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024)
#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
/* SPL */
#define CONFIG_SPL_FAT_SUPPORT

View File

@ -46,7 +46,6 @@
CONFIG_SYS_SDRAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_MALLOC_LEN SZ_4M
#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#define CONFIG_SYS_MEMTEST_START 0x00100000
#define CONFIG_SYS_MEMTEST_END 0x00200000
#define CONFIG_LOADADDR 0x00200000

View File

@ -40,7 +40,6 @@
#define CONFIG_CMDLINE_EDITING
/* Size of malloc() pool before and after relocation */
#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 << 20))
/*

View File

@ -60,7 +60,6 @@
/*
* Size of malloc() pool, before and after relocation
*/
#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#define CONFIG_MALLOC_F_ADDR 0x0010000
#define CONFIG_SYS_MALLOC_LEN (32 << 20) /* 32MB */

View File

@ -48,9 +48,6 @@
*/
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
/* Small malloc pool before relocation */
#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
/*
* select serial console configuration
*/

View File

@ -21,7 +21,6 @@
#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* External Crystal, in Hz */
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
/* CPU */
#define CONFIG_ARCH_CPU_INIT

View File

@ -28,7 +28,6 @@
(PHYS_SDRAM_1_SIZE - CONFIG_ENV_SIZE)
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024)
#define CONFIG_SYS_MALLOC_F_LEN 0x2000
#define CONFIG_DM
/* serial port (PL011) configuration */

View File

@ -29,7 +29,6 @@
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_DM)
# define CONFIG_DW_SERIAL
# define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#endif
/*

View File

@ -37,7 +37,6 @@
* Size of malloc() pool
*/
#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MB */
#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#define CONFIG_SYS_NONCACHED_MEMORY (1 << 20) /* 1 MiB */

View File

@ -21,7 +21,6 @@
#ifndef CONFIG_SPL_BUILD
# define CONFIG_OMAP_SERIAL
# define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#endif
#include <asm/arch/omap.h>

View File

@ -20,7 +20,6 @@
#ifndef CONFIG_SPL_BUILD
# define CONFIG_OMAP_SERIAL
# define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#endif
/* The chip has SDRC controller */

View File

@ -80,8 +80,6 @@
#define CONFIG_SMC911X_BASE CONFIG_SUPPORT_CARD_ETHER_BASE
#define CONFIG_SMC911X_32_BIT
#define CONFIG_SYS_MALLOC_F_LEN 0x2000
/*-----------------------------------------------------------------------
* MMU and Cache Setting
*----------------------------------------------------------------------*/

View File

@ -187,7 +187,6 @@
#define CONFIG_SYS_STACK_SIZE (32 * 1024)
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MALLOC_LEN 0x200000
#define CONFIG_SYS_MALLOC_F_LEN (2 << 10)
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE