u-boot-brain/arch/arm
Stefan Bosch d1611086e0 arm: add support for SoC s5p4418 (cpu) / nanopi2 board
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01:
- SPL not supported yet --> no spl-dir in arch/arm/cpu/armv7/s5p4418/.
  Appropriate line in Makefile removed.
- cpu.c: '#include <cpu_func.h>' added.
- arch/arm/cpu/armv7/s5p4418/u-boot.lds removed, is not required
  anylonger.
- "obj-$(CONFIG_ARCH_NEXELL) += s5p-common/" added to
  arch/arm/cpu/armv7/Makefile since s5p-common/pwm.c is used instead
  of drivers/pwm/pwm-nexell.c.
- s5p4418.dtsi: '#include "../../../include/generated/autoconf.h"'
  removed, is not necessary, error at out-of-tree building.
  '#ifdef CONFIG_CPU_NXP4330'-blocks (2x) removed. Some minor changes
  regarding mmc. 'u-boot,dm-pre-reloc' added to dp0 because of added
  DM_VIDEO support.
- board/s5p4418/ renamed to board/friendlyarm/
- All s5p4418-boards except nanopi2 removed because there is no
  possibility to test the other boards.
- Kconfig: Changes to have a structure like mach-bcm283x (RaspberryPi),
  e.g. "config ..." entries moved from/to other Kconfig.
- "CONFIG_" removed from several s5p4418/nanopi2 specific defines
  because the appropriate values do not need to be configurable.
- nanopi2/board.c: All getenv(), getenv_ulong(), setenv() and saveenv()
  renamed to env_get(), env_get_ulong(), env_set() and env_save(),
  respectively. MACH_TYPE_S5P4418 is not defined anymore, therefore
  appropriate code removed (not necessary for DT-kernels).
- nanopi2/onewire.c: All crc8() renamed to crc8_ow() because crc8() is
  already defined in lib/crc8.c (with different parameters).
- dts: "nexell,s5pxx18-i2c" used instead of "i2c-gpio", i2c0 and
  i2c1 added. gmac-, ehci- and dwc2otg-entries removed because the
  appropriate functionality is not supported yet. New mmc-property
  "mmcboost" added.
  s5p4418-pinctrl.dtsi: gmac-entries removed, mmc- and i2c-entries
  added.
- '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where
  possible (and similar).

Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-29 08:43:40 -04:00
..
cpu arm: add support for SoC s5p4418 (cpu) / nanopi2 board 2020-07-29 08:43:40 -04:00
dts arm: add support for SoC s5p4418 (cpu) / nanopi2 board 2020-07-29 08:43:40 -04:00
include arm: enable allocate-on-read for LPAE's DCACHE_WRITEBACK/_WRITETHROUGH 2020-07-29 08:43:40 -04:00
lib treewide: convert bd_t to struct bd_info by coccinelle 2020-07-17 09:30:13 -04:00
mach-aspeed common: Drop log.h from common header 2020-05-18 21:19:18 -04:00
mach-at91 drivers: rename drivers to match compatible string 2020-07-09 18:57:22 -06:00
mach-bcm283x - add support for PCI and XHCI for RPi4 (64 bit only) 2020-07-10 14:31:22 -04:00
mach-bcmstb
mach-cortina board: presidio-asic: Add basic G3 engr. development board support 2020-02-07 16:16:01 -05:00
mach-davinci treewide: convert bd_t to struct bd_info manually 2020-07-17 10:46:44 -04:00
mach-exynos common: Drop linux/bitops.h from common header 2020-05-18 21:19:23 -04:00
mach-highbank common: Drop init.h from common header 2020-05-18 17:33:33 -04:00
mach-imx treewide: convert bd_t to struct bd_info by coccinelle 2020-07-17 09:30:13 -04:00
mach-integrator
mach-ipq40xx arm: Add support for Qualcomm IPQ40xx family 2020-07-29 08:43:40 -04:00
mach-k3 arm: mach-k3: Use SOC driver for device identification 2020-07-25 14:46:57 -06:00
mach-keystone common: Drop linux/bitops.h from common header 2020-05-18 21:19:23 -04:00
mach-kirkwood Convert CONFIG_ENV_OVERWRITE to Kconfig 2020-07-28 16:18:06 -04:00
mach-lpc32xx treewide: convert bd_t to struct bd_info by coccinelle 2020-07-17 09:30:13 -04:00
mach-mediatek common: Drop linux/bitops.h from common header 2020-05-18 21:19:23 -04:00
mach-meson treewide: convert bd_t to struct bd_info by coccinelle 2020-07-17 09:30:13 -04:00
mach-mvebu Convert CONFIG_ENV_OVERWRITE to Kconfig 2020-07-28 16:18:06 -04:00
mach-nexell pwm: add driver for nexell 2020-07-29 08:43:40 -04:00
mach-omap2 treewide: convert bd_t to struct bd_info by coccinelle 2020-07-17 09:30:13 -04:00
mach-orion5x treewide: convert bd_t to struct bd_info by coccinelle 2020-07-17 09:30:13 -04:00
mach-owl Actions: OWL: Calculate SDRAM size 2020-07-07 16:09:22 -04:00
mach-qemu qemu: don't allow to select 32- and 64-bit 2020-04-24 10:51:32 -04:00
mach-rmobile ARM: rmobile: Add Beacon EmbeddedWorks RZG2M Dev Kit 2020-07-25 14:19:26 +02:00
mach-rockchip rockchip: Separate the reset cause from display cpuinfo 2020-07-22 20:55:13 +08:00
mach-s5pc1xx common: Drop net.h from common header 2020-05-18 17:33:31 -04:00
mach-snapdragon treewide: convert devfdt_get_addr() to dev_read_addr() 2020-07-25 14:46:57 -06:00
mach-socfpga socfpga: Mark socfpga_fpga_add() as static inline in the non-FPGA case 2020-07-01 10:11:03 -04:00
mach-sti
mach-stm32 common: Drop init.h from common header 2020-05-18 17:33:33 -04:00
mach-stm32mp treewide: convert bd_t to struct bd_info by coccinelle 2020-07-17 09:30:13 -04:00
mach-sunxi sunxi: Silence warning about non-static inline function 2020-06-01 22:38:08 +05:30
mach-tegra treewide: convert bd_t to struct bd_info by coccinelle 2020-07-17 09:30:13 -04:00
mach-u8500 common: Drop init.h from common header 2020-05-18 17:33:33 -04:00
mach-uniphier treewide: convert bd_t to struct bd_info by coccinelle 2020-07-17 09:30:13 -04:00
mach-versal common: Drop linux/bitops.h from common header 2020-05-18 21:19:23 -04:00
mach-versatile
mach-zynq common: Drop log.h from common header 2020-05-18 21:19:18 -04:00
mach-zynqmp common: Drop linux/bitops.h from common header 2020-05-18 21:19:23 -04:00
mach-zynqmp-r5 common: Drop init.h from common header 2020-05-18 17:33:33 -04:00
thumb1/include/asm/proc-armv
config.mk
Kconfig arm: add mach-nexell (all files except header files) 2020-07-29 08:43:40 -04:00
Kconfig.debug
Makefile arm: add mach-nexell (all files except header files) 2020-07-29 08:43:40 -04:00