u-boot-brain/board/freescale
Fabio Estevam ca62e5d043 mx6sabreauto: Do not enable WEIM by default
WEIM cannot be used when I2C3 is enabled due to pin conflict, so keep
WEIM disabled by default.

I2C3 controls GPIO I2C expander (USB host and OTG have VBUS controlled by
the GPIO I2C expander), magnetometer, accelerometer.

Not disabling WEIM in U-Boot causes I2C3 to behave badly when booting
a NXP 4.1 kernel, which leads to probe failure on several devices,
including the lack of USB:

imx_usb 2184000.usb: Can't register ci_hdrc platform device, err=-517

By keeping WEIM disabled in U-Boot these kernel issues are gone.

Reported-by: Takashi Matsuzawa <tmatsuzawa@xevo.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-07-12 10:21:10 +02:00
..
b4860qds powerpc: fsl: Update maintainers 2017-06-12 12:18:37 -07:00
bsc9131rdb usb: fsl: Rename fdt_fixup_dr_usb 2016-09-27 23:30:27 +02:00
bsc9132qds flash: complete CONFIG_SYS_NO_FLASH move with renaming 2017-02-12 14:30:25 -05:00
c29xpcie board_f: Rename initdram() to dram_init() 2017-04-13 09:40:57 -04:00
common Merge git://git.denx.de/u-boot-fsl-qoriq 2017-06-03 18:05:04 -04:00
corenet_ds board_f: Rename initdram() to dram_init() 2017-04-13 09:40:57 -04:00
ls1012afrdm armv8: layerscape: Update early MMU for DDR after initialization 2017-03-14 08:44:03 -07:00
ls1012aqds armv8: layerscape: Update early MMU for DDR after initialization 2017-03-14 08:44:03 -07:00
ls1012ardb armv8: LS1012ARDB: Add QSPI Secure Boot target 2017-04-17 09:03:30 -07:00
ls1021aiot Convert CONFIG_FSL_DCU_FB to Kconfig 2017-04-14 13:37:35 +02:00
ls1021aqds common: freescale: Move arch-specific declarations 2017-06-05 12:30:55 -04:00
ls1021atwr arm: ls1021atwr: Enable RGMII TX/RX clock internal delay for AR8033 2017-04-24 08:59:43 -07:00
ls1043aqds common: freescale: Move arch-specific declarations 2017-06-05 12:30:55 -04:00
ls1043ardb common: freescale: Move arch-specific declarations 2017-06-05 12:30:55 -04:00
ls1046aqds common: freescale: Move arch-specific declarations 2017-06-05 12:30:55 -04:00
ls1046ardb common: freescale: Move arch-specific declarations 2017-06-05 12:30:55 -04:00
ls2080a common: freescale: Move arch-specific declarations 2017-06-05 12:30:55 -04:00
ls2080aqds common: freescale: Move arch-specific declarations 2017-06-05 12:30:55 -04:00
ls2080ardb common: freescale: Move arch-specific declarations 2017-06-05 12:30:55 -04:00
m547xevb i2c: powerpc: Remove use of CONFIG_HARD_I2C 2017-05-15 06:17:25 +02:00
m548xevb board_f: Rename initdram() to dram_init() 2017-04-13 09:40:57 -04:00
m5208evbe board_f: Rename initdram() to dram_init() 2017-04-13 09:40:57 -04:00
m5235evb board_f: Rename initdram() to dram_init() 2017-04-13 09:40:57 -04:00
m5249evb board_f: Rename initdram() to dram_init() 2017-04-13 09:40:57 -04:00
m5253demo Kconfig: Add a CONFIG_IDE option 2017-05-22 12:45:27 -04:00
m5253evbe Kconfig: Add a CONFIG_IDE option 2017-05-22 12:45:27 -04:00
m5272c3 board_f: Rename initdram() to dram_init() 2017-04-13 09:40:57 -04:00
m5275evb board_f: Rename initdram() to dram_init() 2017-04-13 09:40:57 -04:00
m5282evb board_f: Rename initdram() to dram_init() 2017-04-13 09:40:57 -04:00
m5329evb board_f: Rename initdram() to dram_init() 2017-04-13 09:40:57 -04:00
m5373evb i2c: powerpc: Remove use of CONFIG_HARD_I2C 2017-05-15 06:17:25 +02:00
m52277evb i2c: powerpc: Remove use of CONFIG_HARD_I2C 2017-05-15 06:17:25 +02:00
m53017evb i2c: powerpc: Remove use of CONFIG_HARD_I2C 2017-05-15 06:17:25 +02:00
m54418twr board_f: Rename initdram() to dram_init() 2017-04-13 09:40:57 -04:00
m54451evb board_f: Rename initdram() to dram_init() 2017-04-13 09:40:57 -04:00
m54455evb Kconfig: Add a CONFIG_IDE option 2017-05-22 12:45:27 -04:00
mpc832xemds board_f: Rename initdram() to dram_init() 2017-04-13 09:40:57 -04:00
mpc837xemds board_f: Rename initdram() to dram_init() 2017-04-13 09:40:57 -04:00
mpc837xerdb board_f: Rename initdram() to dram_init() 2017-04-13 09:40:57 -04:00
mpc8308rdb board_f: Rename initdram() to dram_init() 2017-04-13 09:40:57 -04:00
mpc8313erdb board_f: Rename initdram() to dram_init() 2017-04-13 09:40:57 -04:00
mpc8315erdb board_f: Rename initdram() to dram_init() 2017-04-13 09:40:57 -04:00
mpc8323erdb board_f: Rename initdram() to dram_init() 2017-04-13 09:40:57 -04:00
mpc8349emds board_f: Rename initdram() to dram_init() 2017-04-13 09:40:57 -04:00
mpc8349itx board_f: Rename initdram() to dram_init() 2017-04-13 09:40:57 -04:00
mpc8536ds powerpc: mpc8536ds: Update maintainer 2017-06-12 12:18:37 -07:00
mpc8541cds powerpc: mpc85xx: Update maintainer for MPC8541CDS and MPC8555CDS 2017-06-12 11:30:00 -07:00
mpc8544ds powerpc: mpc8544ds: Update maintainer 2017-06-12 12:18:37 -07:00
mpc8548cds powerpc: mpc8548cds: Update maintainer 2017-06-12 12:18:36 -07:00
mpc8555cds powerpc: mpc85xx: Update maintainer for MPC8541CDS and MPC8555CDS 2017-06-12 11:30:00 -07:00
mpc8568mds powerpc: mpc8568mds: Update board config 2017-06-12 12:18:37 -07:00
mpc8569mds powerpc: mpc8569mds: Update config and maintainer 2017-06-12 12:18:37 -07:00
mpc8572ds Use correct spelling of "U-Boot" 2016-02-06 12:00:59 +01:00
mpc8610hpcd powerpc: mpc86xx: Update maintainer for MPC8610HPCD and MPC8641HPCN 2017-06-12 11:30:00 -07:00
mpc8641hpcn powerpc: mpc86xx: Update maintainer for MPC8610HPCD and MPC8641HPCN 2017-06-12 11:30:00 -07:00
mx6qarm2 imx: reorganize IMX code as other SOCs 2017-07-12 10:17:44 +02:00
mx6sabreauto mx6sabreauto: Do not enable WEIM by default 2017-07-12 10:21:10 +02:00
mx6sabresd imx: reorganize IMX code as other SOCs 2017-07-12 10:17:44 +02:00
mx6slevk imx: reorganize IMX code as other SOCs 2017-07-12 10:17:44 +02:00
mx6sllevk imx: reorganize IMX code as other SOCs 2017-07-12 10:17:44 +02:00
mx6sxsabreauto imx: reorganize IMX code as other SOCs 2017-07-12 10:17:44 +02:00
mx6sxsabresd imx: reorganize IMX code as other SOCs 2017-07-12 10:17:44 +02:00
mx6ul_14x14_evk imx: reorganize IMX code as other SOCs 2017-07-12 10:17:44 +02:00
mx6ullevk imx: reorganize IMX code as other SOCs 2017-07-12 10:17:44 +02:00
mx7dsabresd imx: reorganize IMX code as other SOCs 2017-07-12 10:17:44 +02:00
mx7ulp_evk imx: imx7ulp: add EVK board support 2017-03-17 09:27:08 +01:00
mx23evk kconfig: arm: introduce symbol for ARM CPUs 2014-10-29 09:02:09 -04:00
mx25pdk mx25pdk: Set the eSDHC PER clock to 48 MHz 2017-05-31 10:14:41 +02:00
mx28evk Fix various typos, scattered over the code. 2016-05-05 21:39:26 -04:00
mx31ads kconfig: arm: introduce symbol for ARM CPUs 2014-10-29 09:02:09 -04:00
mx31pdk kconfig: arm: introduce symbol for ARM CPUs 2014-10-29 09:02:09 -04:00
mx35pdk arm: Add explicit include of <asm/mach-types.h> 2017-06-05 11:02:36 -04:00
mx51evk imx: reorganize IMX code as other SOCs 2017-07-12 10:17:44 +02:00
mx53ard board_f: Drop setup_dram_config() wrapper 2017-04-05 16:36:51 -04:00
mx53evk imx: reorganize IMX code as other SOCs 2017-07-12 10:17:44 +02:00
mx53loco imx: reorganize IMX code as other SOCs 2017-07-12 10:17:44 +02:00
mx53smd board_f: Drop setup_dram_config() wrapper 2017-04-05 16:36:51 -04:00
p1_p2_rdb_pc p1_p2_rdb: Fix unused variable warning 2017-05-09 09:11:04 -04:00
p1_twr powerpc: fsl: Update maintainers 2017-06-12 12:18:37 -07:00
p1010rdb powerpc: fsl: Update maintainers 2017-06-12 12:18:37 -07:00
p1022ds board_f: Rename initdram() to dram_init() 2017-04-13 09:40:57 -04:00
p1023rdb usb: fsl: Rename fdt_fixup_dr_usb 2016-09-27 23:30:27 +02:00
p2041rdb board_f: Rename initdram() to dram_init() 2017-04-13 09:40:57 -04:00
qemu-ppce500 qemu-ppce500: pass 'range_id' around in pci_map_region 2016-01-04 12:25:34 -05:00
s32v234evb imx: reorganize IMX code as other SOCs 2017-07-12 10:17:44 +02:00
t4qds board_f: Rename initdram() to dram_init() 2017-04-13 09:40:57 -04:00
t4rdb board_f: Rename initdram() to dram_init() 2017-04-13 09:40:57 -04:00
t102xqds board_f: Rename initdram() to dram_init() 2017-04-13 09:40:57 -04:00
t102xrdb powerpc/board/t1024rdb: enable board-level reset when issuing reset command 2017-04-17 09:03:30 -07:00
t104xrdb powerpc: fsl: Update maintainers 2017-06-12 12:18:37 -07:00
t208xqds board_f: Rename initdram() to dram_init() 2017-04-13 09:40:57 -04:00
t208xrdb board_f: Rename initdram() to dram_init() 2017-04-13 09:40:57 -04:00
t1040qds board_f: Rename initdram() to dram_init() 2017-04-13 09:40:57 -04:00
vf610twr imx: reorganize IMX code as other SOCs 2017-07-12 10:17:44 +02:00