Jens Kuske bb3654629a sunxi: Fix H3 DRAM DQ read delay configuration ... The read delays were set incorrectly, leading to reliability issues at higher DRAM clock speeds. This commit adjusts this to match the vendor boot0 behaviour. Signed-off-by: Jens Kuske <jenskuske@gmail.com> Tested-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>		2015-12-10 15:45:48 +01:00
..
board.c	sunxi: Add support for UART0 in PB pin group on A83T	2015-12-10 11:14:21 +01:00
clock_sun4i.c	sun4i: clock: Cleanup some whitespace errors	2015-12-10 15:45:48 +01:00
clock_sun6i.c	sunxi: twi: Enable clocks on sun7i	2015-12-10 15:45:48 +01:00
clock_sun8i_a83t.c	sunxi: clk: add basic clocks for A83T	2015-12-10 15:45:47 +01:00
clock_sun9i.c	sun9i: Add sun9i (A80) clock setup support	2015-01-22 12:34:55 +01:00
clock.c	sunxi: add sun7i clocks and timer support.	2014-05-25 16:12:12 +02:00
config.mk	sunxi: Normalise FEL support	2015-02-16 20:15:09 +01:00
cpu_info.c	sunxi: Add Machine Support for A83T SOC	2015-12-10 11:14:21 +01:00
dram_helpers.c	sunxi: dram: Un-inline dram helper functions	2015-02-16 20:05:52 +01:00
dram_sun4i.c	sunxi: Make DRAM_ODT_EN Kconfig setting a bool	2015-05-19 18:46:44 +02:00
dram_sun6i.c	sunxi: Fix buggy sun6i/sun8i DRAM size detection logic	2015-01-14 14:56:37 +01:00
dram_sun8i_a23.c	Kill unneeded #include <linux/kconfig.h>	2015-07-27 15:02:12 -04:00
dram_sun8i_a33.c	Kill unneeded #include <linux/kconfig.h>	2015-07-27 15:02:12 -04:00
dram_sun8i_a83t.c	sunxi: Add support for Allwinner A83T DRAM	2015-12-10 15:45:47 +01:00
dram_sun8i_h3.c	sunxi: Fix H3 DRAM DQ read delay configuration	2015-12-10 15:45:48 +01:00
fel_utils.S	sunxi: Support the FEL boot mode in the regular u-boot build	2015-02-16 20:23:52 +01:00
Makefile	sunxi: Add support for Allwinner A83T DRAM	2015-12-10 15:45:47 +01:00
p2wi.c	sun6i: s/SUNXI_*P2WI*/SUN6I_*P2WI*/	2015-01-14 14:56:36 +01:00
pinmux.c	dm: sunxi: Add pinmux functions which take a bank parameter	2014-11-05 13:09:58 +01:00
pmic_bus.c	sunxi: power: enabled support for axp818	2015-12-10 11:14:22 +01:00
prcm.c	ARM: sunxi: Allow specifying module in prcm apb0 init function	2014-10-24 09:35:39 +02:00
psci_sun6i.S	ARMv7: Factor out reusable timer_wait from sunxi/psci_sun7i.S	2015-07-20 11:44:38 -07:00
psci_sun7i.S	ARMv7: Factor out reusable timer_wait from sunxi/psci_sun7i.S	2015-07-20 11:44:38 -07:00
rsb.c	sunxi: rsb: Enable R_PIO clock before configuring external pins	2015-07-05 11:32:11 +02:00
start.c	sunxi: add sun7i cpu, board and start of day support	2014-05-25 16:12:40 +02:00
timer.c	sunxi: add sun7i clocks and timer support.	2014-05-25 16:12:12 +02:00
tzpc.c	sunxi: Enable non-secure access to RTC on sun6i (A31s)	2015-08-31 08:43:42 +02:00
u-boot-spl.lds	sunxi: Add i2c support	2014-07-18 19:41:30 +01:00
usb_phy.c	sunxi: power: Unify axp pmic function names	2015-10-20 18:40:27 +02:00