u-boot-brain/arch/arm/mach-sunxi
Simon Glass c1c3fe2307 env: Convert CONFIG_ENV_IS_IN... to a choice
At present we support multiple environment drivers but there is not way to
select between them at run time. Also settings related to the position and
size of the environment area are global (i.e. apply to all locations).

Until these limitations are removed we cannot really support more than one
environment location. Adjust the location to be a choice so that only one
can be selected. By default the environment is 'nowhere', meaning that the
environment exists only in memory and cannot be saved.

Also expand the help for the 'nowhere' option and move it to the top since
it is the default.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Move all of the imply logic to default X if Y so it works again]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-15 20:50:01 -04:00
..
dram_timings sunxi: add LPDDR3 timing from stock boot0 2017-06-08 22:37:55 +05:30
board.c sunxi: i2c: Add support for DM I2C 2017-04-28 09:19:03 +02:00
clock_sun4i.c sunxi: Move cpu independent code to mach directory 2016-04-01 09:52:28 +02:00
clock_sun6i.c sunxi: add clock configuration of R40 sata 2017-05-02 09:21:09 +02:00
clock_sun8i_a83t.c sunxi: Move cpu independent code to mach directory 2016-04-01 09:52:28 +02:00
clock_sun9i.c sunxi: add initial clock setup for sun9i for SPL 2016-10-30 11:38:04 +01:00
clock.c sunxi: add gtbus-initialisation for sun9i 2016-10-30 11:38:04 +01:00
cpu_info.c sunxi: add basic V3s support 2017-04-21 09:23:17 +02:00
dram_helpers.c ARM: Rework and correct barrier definitions 2016-08-05 07:23:57 -04:00
dram_sun4i.c sunxi: Move cpu independent code to mach directory 2016-04-01 09:52:28 +02:00
dram_sun6i.c sunxi: Move cpu independent code to mach directory 2016-04-01 09:52:28 +02:00
dram_sun8i_a23.c sunxi: Move cpu independent code to mach directory 2016-04-01 09:52:28 +02:00
dram_sun8i_a33.c sunxi: Move cpu independent code to mach directory 2016-04-01 09:52:28 +02:00
dram_sun8i_a83t.c sunxi: Move cpu independent code to mach directory 2016-04-01 09:52:28 +02:00
dram_sun9i.c sunxi: DRAM initialisation for sun9i 2016-10-30 11:38:04 +01:00
dram_sunxi_dw.c sunxi: add LPDDR3 DRAM type support for DesignWare-like DRAM controller 2017-06-08 22:37:55 +05:30
gtbus_sun9i.c sunxi: add gtbus-initialisation for sun9i 2016-10-30 11:38:04 +01:00
Kconfig env: Convert CONFIG_ENV_IS_IN... to a choice 2017-08-15 20:50:01 -04:00
Makefile sunxi: Add selective DRAM type and timing 2017-06-08 22:37:55 +05:30
p2wi.c sunxi: Move cpu independent code to mach directory 2016-04-01 09:52:28 +02:00
pinmux.c sunxi: Move cpu independent code to mach directory 2016-04-01 09:52:28 +02:00
pmic_bus.c sunxi: Enable AXP221s in I2C mode with the R40 SoC 2017-04-20 13:30:00 +02:00
prcm.c sunxi: Move cpu independent code to mach directory 2016-04-01 09:52:28 +02:00
rmr_switch.S sunxi: A64: do an RMR switch if started in AArch32 mode 2017-01-04 16:37:42 +01:00
rsb.c sunxi: Move cpu independent code to mach directory 2016-04-01 09:52:28 +02:00
usb_phy.c sunxi: prepare for sharing MACH_SUN8I_H3 config symbol 2017-04-05 15:03:17 +05:30