mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-08 05:43:21 +09:00
![Peng Fan](/assets/img/avatar_default.png)
Add i.MX8MQ EVK support. SPL will initialize ddr and load ddr phy firmware. Then loading FIT image, ATF to OCRAM, U-Boot and DTB to DRAM. The boot log with Arm trusted firmware console enabled: " U-Boot SPL 2018.11-00142-g9ae14e7274 (Nov 20 2018 - 18:13:16 +0800) PMIC: PFUZE100 ID=0x10 Normal Boot Trying to boot from MMC2 NOTICE: Configureing TZASC380 NOTICE: BL31: v1.5(release):p9.0.0_1.0.0-beta-20180928-8-ge09c4b62-dirty NOTICE: BL31: Built : 09:28:54, Nov 8 2018 lpddr4 swffc start NOTICE: sip svc init U-Boot 2018.11-00142-g9ae14e7274 (Nov 20 2018 - 18:13:16 +0800) CPU: Freescale i.MX8MQ rev2.0 at 1000 MHz Reset cause: POR Model: Freescale i.MX8MQ EVK DRAM: 3 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 using MAC address from ROM eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 " Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
37 lines
1.0 KiB
Plaintext
37 lines
1.0 KiB
Plaintext
U-Boot for the NXP i.MX8MQ EVK board
|
|
|
|
Quick Start
|
|
====================
|
|
- Build the ARM Trusted firmware binary
|
|
- Get ddr and hdmi fimware
|
|
- Build U-Boot
|
|
- Boot
|
|
|
|
Get and Build the ARM Trusted firmware
|
|
====================
|
|
Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
|
|
branch: imx_4.14.62_1.0.0_beta
|
|
$ make PLAT=imx8mq bl31
|
|
|
|
Get the ddr and hdmi firmware
|
|
====================
|
|
Note: srctree is U-Boot source directory
|
|
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.9.bin
|
|
$ chmod +x firmware-imx-7.9.bin
|
|
$ cp firmware-imx-7.9/firmware/hdmi/cadence/signed_hdmi_imx8m.bin $(srctree)
|
|
$ cp firmware-imx-7.9/firmware-imx-7.9/firmware/ddr/synopsys/lpddr4*.bin $(srctee)
|
|
|
|
Build U-Boot
|
|
====================
|
|
$ export ARCH=arm64
|
|
$ export CROSS_COMPILE=aarch64-poky-linux-
|
|
$ make imx8mq_evk_defconfig
|
|
$ make flash.bin
|
|
|
|
Burn the flash.bin to MicroSD card offset 33KB
|
|
$sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33
|
|
|
|
Boot
|
|
====================
|
|
Set Boot switch SW801: 1100 and Bmode: 10 to boot from Micro SD.
|