u-boot-brain/board/freescale/imx8qm_mek
Simon Glass e7dcf5645f env: Drop environment.h header file where not needed
This header file is now only used by files that access internal
environment features. Drop it from various places where it is not needed.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11 16:43:41 -04:00
..
imx8qm_mek.c env: Drop environment.h header file where not needed 2019-08-11 16:43:41 -04:00
imximage.cfg imx: support i.MX8QM MEK board 2019-04-25 17:03:25 +02:00
Kconfig imx: support i.MX8QM MEK board 2019-04-25 17:03:25 +02:00
MAINTAINERS imx: support i.MX8QM MEK board 2019-04-25 17:03:25 +02:00
Makefile imx: support i.MX8QM MEK board 2019-04-25 17:03:25 +02:00
README imx: support i.MX8QM MEK board 2019-04-25 17:03:25 +02:00
spl.c imx: support i.MX8QM MEK board 2019-04-25 17:03:25 +02:00

U-Boot for the NXP i.MX8QM EVK board

Quick Start
===========

- Build the ARM Trusted firmware binary
- Get scfw_tcm.bin and ahab-container.img
- Build U-Boot
- Flash the binary into the SD card
- Boot

Get and Build the ARM Trusted firmware
======================================

$ git clone https://source.codeaurora.org/external/imx/imx-atf
$ cd imx-atf/
$ git checkout origin/imx_4.14.78_1.0.0_ga -b imx_4.14.78_1.0.0_ga
$ make PLAT=imx8qm bl31

Get scfw_tcm.bin and ahab-container.img
==============================

$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-sc-firmware-1.1.bin
$ chmod +x imx-sc-firmware-1.1.bin
$ ./imx-sc-firmware-1.1.bin
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
$ chmod +x firmware-imx-8.0.bin
$ ./firmware-imx-8.0.bin

Copy the following binaries to U-Boot folder:

$ cp imx-atf/build/imx8qm/release/bl31.bin .
$ cp u-boot/u-boot.bin .

Copy the following firmwares U-Boot folder :

$ cp firmware-imx-7.6/firmware/seco/ahab-container.img .
$ cp imx-sc-firmware-0.7/mx8qm-mek-scfw-tcm.bin	.

Build U-Boot
============
$ export ATF_LOAD_ADDR=0x80000000
$ export BL33_LOAD_ADDR=0x80020000
$ make imx8qm_mek_defconfig
$ make flash.bin
$ dd if=u-boot.itb of=flash.bin bs=512 seek=1984

Flash the binary into the SD card
=================================

Burn the flash.bin binary to SD card offset 32KB:

$ sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32

Boot
====
Set Boot switch SW2: 1100.