Cyrille Pitchen 9bcb018870 Revert "sf: Fix quad bit set for micron devices" ... This reverts commit c56ae7519f. Once the 'Quad Enable' bit is cleared in their Enhanced Volatile Configuration Register (EVCR), Micron memories expect ALL commands to use the SPI 4-4-4 protocol. Commands using SPI 1-y-z protocols are no longer accepted. Within the reverted commit, the write_evcr() function is implemented using the spi_flash_write_common(), which is a shortcut for the [ spi_flash_cmd_write_enable(), spi_flash_cmd_write(), spi_flash_cmd_wait_ready() ] sequence. Since the internal state of the Micron memory has been changed when the spi_flash_cmd_write() function completes, the later call of the spi_flash_cmd_wait_ready() function fails. Indeed the SPI controller driver is not aware of the SPI protocol switch. Further patches will fix the support of Micron QSPI memories. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> [Rebase on master, use JEDEC_MFR(info) in place of idcode0] Signed-off-by: Jagan Teki <jagan@openedev.com>		2016-12-15 18:33:16 +01:00
..
adc	sandbox: add ADC driver	2015-11-02 10:38:00 +09:00
bios_emulator	bios_emulator: Fix cast for 64-bit compilation	2016-10-11 11:55:33 +08:00
block	Revert "Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze"	2016-12-09 07:56:54 -05:00
bootcount	bootcounter_ram: Fix misaligned cache warning	2016-11-28 15:10:34 -05:00
clk	rockchip: clk: Support setting ACLK	2016-11-25 17:59:31 -07:00
core	dm: core: Add dev_get_addr_size_index() to retrieve addr and size	2016-12-02 21:03:31 -07:00
cpu	cpu: Add get_vendor callback	2016-10-19 09:01:51 +02:00
crypto	powerpc: C29X: Move CONFIG_PPC_C29X to Kconfig option	2016-11-23 23:42:04 -08:00
ddr	fsl/ddr: Add erratum_a009942_check_cpo and clean related erratum	2016-12-05 08:31:45 -08:00
demo	drivers: hierarchize drivers Kconfig menu	2015-08-12 20:47:44 -04:00
dfu	dfu: align array in dfu_get_dev_type with enum dfu_device_type	2016-11-03 11:55:25 +01:00
dma	treewide: replace #include <asm/errno.h> with <linux/errno.h>	2016-09-23 17:55:42 -04:00
fpga	treewide: replace #include <asm/errno.h> with <linux/errno.h>	2016-09-23 17:55:42 -04:00
gpio	gpio: bcm2835: add device tree support	2016-11-28 20:09:45 -05:00
hwmon	mailaddr: Update mail address	2016-01-27 15:32:05 +01:00
i2c	dm: i2c: Add a note to I2C drivers which need conversion	2016-12-05 13:28:03 +01:00
input	powerpc: MPC8555: Remove macro CONFIG_MPC8555	2016-11-23 23:42:05 -08:00
led	dm: led: Tidy up SPL options for the led and led-gpio	2015-09-02 21:28:22 -06:00
mailbox	libfdt: Bring in upstream stringlist functions	2016-10-13 13:54:10 -06:00
memory	memory: Move TI_AEMIF config to KCONFIG	2016-04-18 17:11:43 -04:00
misc	cmd: crosec: Move cros_ec_decode_region helper to cmd/cros_ec.c	2016-12-02 21:04:48 -07:00
mmc	ARM: OMAP4+: Add support for getting pbias info from board	2016-12-04 13:54:51 -05:00
mtd	Revert "sf: Fix quad bit set for micron devices"	2016-12-15 18:33:16 +01:00
net	Revert "Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze"	2016-12-09 07:56:54 -05:00
pch	dm: Use dm_scan_fdt_dev() directly where possible	2016-07-27 14:15:54 -06:00
pci	pci: mvebu: Add PCIe driver for Armada-8K	2016-12-05 13:34:33 +01:00
pcmcia	powerpc: mpc824x: remove MPC824X cpu support	2015-01-05 12:08:55 -05:00
phy/marvell	drivers/phy: marvell: Add support for the slave CP COMPHY device	2016-12-05 13:28:23 +01:00
pinctrl	arm64: mvebu: pinctrl: Add pin control driver for A8K family	2016-12-12 09:04:52 +01:00
power	ARM: OMAP4+: Add support for getting pbias info from board	2016-12-04 13:54:51 -05:00
pwm	pwm: imx: increase support up to PWM8 for i.MX6SX	2016-11-29 16:34:27 +01:00
qe	powerpc: P1025: Remove macro CONFIG_P1025	2016-11-23 23:42:10 -08:00
ram	ram: rename CONFIG_SPL_RAM_SUPPORT to CONFIG_SPL_RAM	2015-08-18 13:46:02 -04:00
remoteproc	remoteproc: Add support for TI power processor	2016-03-14 19:18:37 -04:00
reset	libfdt: Bring in upstream stringlist functions	2016-10-13 13:54:10 -06:00
rtc	rtc: Add RTC chip pcf2127 support	2016-12-02 21:03:31 -07:00
serial	serial: Drop the s3c24x0 serial driver	2016-12-04 13:55:00 -05:00
soc	Use correct spelling of "U-Boot"	2016-02-06 12:00:59 +01:00
sound	of: clean up OF_CONTROL ifdef conditionals	2015-08-18 13:46:05 -04:00
spi	spi: cadence_qspi: Move DT prop code to match layout	2016-12-15 16:57:28 +01:00
spmi	Merge git://git.denx.de/u-boot-dm	2016-08-12 16:00:50 -04:00
sysreset	xtensa: add support for the 'xtfpga' evaluation board	2016-08-15 18:46:40 -04:00
thermal	thermal: Kconfig: Add IMX_THERMAL entry	2016-10-26 16:53:16 +02:00
timer	Merge git://git.denx.de/u-boot-dm	2016-03-14 19:21:44 -04:00
tpm	tpm: tpm_tis_lpc: Add support for AT97SC3204	2016-12-02 10:37:47 -07:00
twserial	drivers: convert makefiles to Kbuild style	2013-10-31 13:26:01 -04:00
usb	net: usb: r8152: Use ALLOC_CACHE_ALIGN_BUFFER() to allocate the buffers	2016-12-08 10:36:22 -06:00
video	bcm2835 video: Map frame buffer as 32bpp	2016-11-28 20:15:20 -05:00
watchdog	imx_watchdog: Do not assert WDOG_B on watchdog init	2016-10-04 12:01:14 +02:00
Kconfig	drivers/phy: Add Marvell SerDes / PHY drivers used on Armada 3k	2016-09-27 17:29:53 +02:00
Makefile	spl: add USB Gadget config option	2016-11-28 19:49:49 -05:00