Michal Simek 895a7866c2 serial: zynq: Change uart initialization logic ... The commit a673025535 ("serial: zynq: Initialize uart only before relocation") introduced code which detects relocation which is working for single uart instance. With multiple instances in place there is a need to enable and setup every instance. That's why detect if TX is enabled. If it is then don't initialize uart again. In post probe setbrg is called to setup baudrate but values should be the same. As a side effect of this change is that DECLARE_GLOBAL_DATA_PTR can be removed completely. Signed-off-by: Michal Simek <michal.simek@xilinx.com>		2020-04-06 12:52:45 +02:00
..
adc	dm: core: Create a new header file for 'compat' features	2020-02-05 19:33:46 -07:00
ata	Revert "ata: fsl_ahci: Add sata DM support for Freescale powerpc socs"	2020-02-25 10:16:05 +05:30
axi	dm: core: Create a new header file for 'compat' features	2020-02-05 19:33:46 -07:00
bios_emulator	bios_emulator: remove stray break	2019-08-09 22:24:02 +08:00
block	dm: core: Create a new header file for 'compat' features	2020-02-05 19:33:46 -07:00
board	drivers: board: Add get_fit_loadable()	2020-01-07 11:13:24 -05:00
bootcount	bootcount: add a DM i2c eeprom backing store for bootcount	2020-01-10 10:25:13 -05:00
cache	common: Move hang() to the same header as panic()	2020-01-24 23:06:49 +05:30
clk	clk: rk3399: Set empty for vopl assigned-clocks	2020-04-02 15:44:56 +02:00
core	dm: core: Add a flag for power domain control on device removal	2020-03-02 19:47:38 -07:00
cpu	Move strtomhz() to vsprintf.h	2019-12-02 18:23:09 -05:00
crypto	crypto: make mod_exp_sw() static	2020-01-25 12:04:36 -05:00
ddr	sandbox conversion to SDL2	2020-02-11 10:58:41 -05:00
demo
dfu	dm: core: Require users of devres to include the header	2020-02-05 19:33:46 -07:00
dma	dma-mapping: move dma_map_(un)single() to <linux/dma-mapping.h>	2020-02-19 21:27:30 +08:00
fastboot	fastboot: mt85xx: add command to flash/erase emmc hwpart	2020-01-25 12:04:36 -05:00
firmware	firmware: zynqmp: Enable IPI code calling also in EL3	2020-04-06 12:52:45 +02:00
fpga	dm: core: Create a new header file for 'compat' features	2020-02-05 19:33:46 -07:00
gpio	gpio/mpc83xx_spisel_boot.c: gpio driver for SPISEL_BOOT signal	2020-03-31 10:06:52 -04:00
hwspinlock	dm: core: Create a new header file for 'compat' features	2020-02-05 19:33:46 -07:00
i2c	i2c: designware_i2c: Correct the selection of speed mode	2020-02-18 08:16:45 +01:00
input	input: Move input.o to be built only in some cases	2019-11-19 17:43:04 -05:00
led	dm: core: Create a new header file for 'compat' features	2020-02-05 19:33:46 -07:00
mailbox	dm: core: Create a new header file for 'compat' features	2020-02-05 19:33:46 -07:00
memory
misc	misc: k3_avs: Fix possible NULL pointer deference	2020-02-26 18:35:29 +05:30
mmc	mmc: t210: Fix 'bad' SD-card clock when doing 400KHz card detect	2020-04-02 14:30:01 -07:00
mtd	nand: raw: zynq: Do not try to probe driver if nand flash is disabled	2020-04-06 12:52:15 +02:00
net	net: zynq-gem: Setup and use mdio base separately	2020-04-06 12:52:45 +02:00
nvme	dm: core: Create a new header file for 'compat' features	2020-02-05 19:33:46 -07:00
pch	x86: Allow removal of standard PCH drivers	2019-12-15 11:44:16 +08:00
pci	pci-host-ecam-generic: access config space independent of system-wide bus id	2020-03-30 08:11:56 +05:30
pci_endpoint	pci_ep: Fix Coverity warning	2019-08-07 15:31:04 -04:00
phy	dm: core: Create a new header file for 'compat' features	2020-02-05 19:33:46 -07:00
pinctrl	pinctrl: stmfx: update the result type of dm_i2c_reg_read	2020-02-13 18:47:00 +01:00
power	dm: arm64: ls1046a: add i2c DM support	2020-03-30 08:12:13 +05:30
pwm	pwm: rk_pwm: Make PWM driver to support all Rockchip Socs	2019-12-06 00:06:23 +08:00
qe	crc32: Use the crc.h header for crc functions	2019-12-02 18:23:08 -05:00
ram	ram: rockchip: Fix Kconfig dependency for RAM_ROCKCHIP_DEBUG	2020-02-13 10:10:50 -05:00
remoteproc	dm: core: Create a new header file for 'compat' features	2020-02-05 19:33:46 -07:00
reset	sandbox conversion to SDL2	2020-02-11 10:58:41 -05:00
rng	drivers/rng: add Amlogic hardware RNG driver	2020-03-11 08:29:58 +01:00
rtc	rtc: m41t62: add compatible for m41st87	2020-03-01 22:07:32 +01:00
scsi	scsi: Add dma direction member to command structure	2019-10-23 20:47:12 -04:00
serial	serial: zynq: Change uart initialization logic	2020-04-06 12:52:45 +02:00
smem	dm: core: Create a new header file for 'compat' features	2020-02-05 19:33:46 -07:00
soc	dma-mapping: move dma_map_(un)single() to <linux/dma-mapping.h>	2020-02-19 21:27:30 +08:00
sound	dm: core: Create a new header file for 'compat' features	2020-02-05 19:33:46 -07:00
spi	Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-tegra	2020-04-03 16:05:46 -04:00
spmi	dm: core: Create a new header file for 'compat' features	2020-02-05 19:33:46 -07:00
sysreset	dm: core: Create a new header file for 'compat' features	2020-02-05 19:33:46 -07:00
tee	dm: core: Create a new header file for 'compat' features	2020-02-05 19:33:46 -07:00
thermal	thermal: ti-bandgap: Fix adc value datatype	2020-01-20 10:10:28 +05:30
timer	dm: core: Create a new header file for 'compat' features	2020-02-05 19:33:46 -07:00
tpm	sandbox conversion to SDL2	2020-02-11 10:58:41 -05:00
ufs	dma-mapping: move dma_map_(un)single() to <linux/dma-mapping.h>	2020-02-19 21:27:30 +08:00
usb	sunxi: Move common defconfig options to Kconfig	2020-03-18 18:25:00 +05:30
video	video: rockchip: Support 4K resolution for rk3399, HDMI	2020-04-02 15:52:01 +02:00
virtio	dm: core: Create a new header file for 'compat' features	2020-02-05 19:33:46 -07:00
w1	dm: core: Create a new header file for 'compat' features	2020-02-05 19:33:46 -07:00
w1-eeprom	dm: core: Create a new header file for 'compat' features	2020-02-05 19:33:46 -07:00
watchdog	watchdog: versal: Add support for Xilinx window watchdog	2020-04-06 12:52:45 +02:00
Kconfig	dm: rng: Add random number generator(rng) uclass	2020-01-07 18:08:21 +01:00
Makefile	Kconfig: Rename CONFIG_SPL_DMA_SUPPORT to CONFIG_SPL_DMA	2020-01-15 19:50:27 -05:00