u-boot-brain/arch/arm/cpu/armv7
Tom Rini 7c352cd38d am33xx: Re-enable SW levelling for DDR2
The recent changes for hw leveling on am33xx were not intended for
DDR2 boards, only DDR3. Update emif_sdram_type to take a sdram_config
value to check against. This lets us pass in the value we would use to
configure, when we have not yet configured the board yet.  In other cases
update the call to be as functional as before and check an already
programmed value in.

Tested-by: Yan Liu <yan-liu@ti.com>
Signed-off-by: Tom Rini <trini@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-06-15 10:57:26 -04:00
..
am33xx am33xx: Re-enable SW levelling for DDR2 2015-06-15 10:57:26 -04:00
bcm281xx bcm281xx: add support for "USB OTG clock" 2014-12-29 16:31:23 -05:00
bcmcygnus arm: bcmcygnus: Add bcmcygnus u-architecture 2014-08-30 07:46:40 -04:00
bcmnsp arm: bcmnsp: Add bcmnsp u-architecture 2014-08-30 07:46:40 -04:00
exynos dts: Disable device tree for SPL on all boards 2015-06-10 19:26:55 -06:00
iproc-common arm: iproc: Initial commit of iproc architecture code 2014-08-30 07:46:40 -04:00
kona-common bcm281xx: add support for "USB OTG clock" 2014-12-29 16:31:23 -05:00
ls102xa ARM: Clean up CONFIG_ARMV7_NONSEC/VIRT/PSCI conditions 2015-05-13 09:24:13 -07:00
mx5 arch: Make board selection choices optional 2015-05-12 18:10:02 -04:00
mx6 arm, imx6, i2c: add I2C4 for MX6DL 2015-05-26 14:16:54 +02:00
omap3 arch: Make board selection choices optional 2015-05-12 18:10:02 -04:00
omap4 arch: Make board selection choices optional 2015-05-12 18:10:02 -04:00
omap5 am33xx: Re-enable SW levelling for DDR2 2015-06-15 10:57:26 -04:00
omap-common am33xx: Re-enable SW levelling for DDR2 2015-06-15 10:57:26 -04:00
rmobile arm: rmobile: alt: Update to QoS revision 0.31 and 0.321 2015-06-01 08:56:34 +09:00
s5p-common armv7: convert makefiles to Kbuild style 2013-10-31 12:53:39 -04:00
s5pc1xx dts: Disable device tree for SPL on all boards 2015-06-10 19:26:55 -06:00
stv0991 stv0991: enable ethernet support 2014-12-09 15:16:19 -05:00
sunxi sunxi: Request macpwr gpio before using it 2015-06-10 16:52:12 +02:00
u8500 armv7: convert makefiles to Kbuild style 2013-10-31 12:53:39 -04:00
vf610 arm: vf610: Add clock support for DSPI 2015-06-08 08:41:55 +02:00
arch_timer.c arm: add support for arch timer 2014-04-17 17:24:38 -04:00
cache_v7.c ARM: cpu: Add ARMv7 barrier operations support 2015-04-16 13:53:26 +02:00
config.mk ARM: move -march=* and -mtune= options to arch/arm/Makefile 2015-03-27 16:55:22 +01:00
cp15.c ARM: Introduce erratum workaround for 454179 2015-03-13 09:28:48 -04:00
cpu.c arm: Allow cleanup_before_linux() without disabling caches 2015-06-10 19:26:54 -06:00
Kconfig tegra: Boot in non-secure mode by default 2015-05-13 09:24:16 -07:00
lowlevel_init.S arm: Reduce the scope of lowlevel_init() 2015-03-04 14:55:04 -05:00
Makefile ARM: Clean up CONFIG_ARMV7_NONSEC/VIRT/PSCI conditions 2015-05-13 09:24:13 -07:00
nonsec_virt.S ARM: HYP/non-sec: Fix the ARCH Timer frequency setting. 2014-12-11 09:41:45 -08:00
psci.S ARM: Put target PC for PSCI CPU_ON on per-CPU stack 2015-05-13 09:24:14 -07:00
start.S remove unnecessary version.h includes 2015-03-24 10:50:50 -04:00
syslib.c ARM: OMAP: hide custom bit manipulation function sr32() 2014-04-17 14:39:54 -04:00
virt-dt.c virt-dt: Allow reservation of secure region when in a RAM carveout 2015-05-13 09:24:14 -07:00
virt-v7.c tegra124: Reserve secure RAM using MC_SECURITY_CFG{0, 1}_0 2015-05-13 09:24:15 -07:00