Lokesh Vutla 784ab7c545 OMAP5: EMIF: Add support for DDR3 device ... In OMAP5432 EMIF controlller supports DDR3 device. This patch adds support for ddr3 device intialization and configuration. Initialization sequence is done as specified in JEDEC specs. This also adds support for ddr3 leveling. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>		2012-07-07 14:07:24 +02:00
..
boot-common.c	ARM:AM33XX: Add SPL support for AM335X EVM	2012-01-16 08:40:12 +01:00
clocks-common.c	OMAP5: palmas: Configure nominal opp vdd values	2012-05-15 08:31:23 +02:00
config.mk	Reduce build times	2011-11-03 20:44:58 +01:00
emif-common.c	OMAP5: EMIF: Add support for DDR3 device	2012-07-07 14:07:24 +02:00
gpio.c	gpio: Replace ARM gpio.h with the common API in include/asm-generic	2012-01-09 20:10:32 -06:00
hwinit-common.c	ARM: OMAP4+: dmm: Take care of overlapping dmm and trap sections.	2012-07-07 14:07:21 +02:00
lowlevel_init.S	armv7: add appropriate headers for assembly functions	2012-05-15 08:31:26 +02:00
Makefile	OMAP3+: Introduce generic logic for OMAP voltage controller	2012-05-15 08:31:22 +02:00
mem-common.c	omap4: make omap4 code common for future reuse	2011-11-15 22:25:50 +01:00
reset.c	OMAP3+: reset: Create a common reset layer.	2012-05-15 08:31:25 +02:00
spl_mmc.c	arm: omap5: correct boot device mode7 for eMMC	2012-05-15 08:31:25 +02:00
spl_nand.c	CMD: Fix CONFIG_CMD_SAVEBP_WRITE_SIZE -> CONFIG_CMD_SPL_WRITE_SIZE	2012-04-19 22:01:13 +02:00
spl_ymodem.c	SPL: Add YMODEM over UART load support	2012-03-26 23:09:25 +02:00
spl.c	arm: omap5: correct boot device mode7 for eMMC	2012-05-15 08:31:25 +02:00
timer.c	Timer: Remove reset_timer_masked()	2011-07-26 14:54:15 +02:00
u-boot-spl.lds	omap: add basic SPL support	2011-08-03 12:49:20 +02:00
utils.c	omap4: calculate EMIF register values	2011-08-03 12:49:19 +02:00
vc.c	OMAP3+: Introduce generic logic for OMAP voltage controller	2012-05-15 08:31:22 +02:00