Ye Li 7247974643 imx8m: Enable WDOG_B for timeout ... When doing reset_cpu, in normal case the WDOG_B outputs immediately after we clean WDA bit. But on mscale, the WDOG_B may be later than internal reset, and cause PMIC not reset. As we enabled the SD3.0 support, the PMIC must be reset to reset SD card. Change the reset_cpu to enable the WDOG_B for timeout as well, and set WDOG timeout to 1s. Reviewed-by: Fabio Estevam <festevam@gmail.com> Acked-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>		2020-05-01 13:46:22 +02:00
..
clock_imx8mm.c	imx8mm: clock: fix fracpll decode issue	2020-05-01 13:46:22 +02:00
clock_imx8mq.c	imx8m: Dump DRAM PLL rate by clocks command	2020-05-01 13:46:21 +02:00
clock_slice.c	imx8m: update clock root and fix core_sel	2020-05-01 13:46:21 +02:00
imximage-8mm-lpddr4.cfg	imx8m: add image cfg for i.MX8MM lpddr4	2019-10-08 16:36:36 +02:00
imximage-8mn-ddr4.cfg	imx8m: add i.MX8MN ddr4 image cfg file	2019-11-05 10:27:18 +01:00
imximage-8mp-lpddr4.cfg	imx: imx8m: add imximage-8mp-lpddr4.cfg	2020-01-08 13:20:09 +01:00
imximage.cfg	imx: imx8m: introduce imximage cfg file	2019-01-01 14:12:18 +01:00
Kconfig	board: toradex: Add Verdin iMX8M Mini support	2020-02-09 14:50:52 +01:00
lowlevel_init.S	imx: rename mx8m,MX8M to imx8m,IMX8M	2019-01-01 14:12:18 +01:00
Makefile	imx: imx8mp: add basic clock	2020-01-08 13:20:08 +01:00
soc.c	imx8m: Enable WDOG_B for timeout	2020-05-01 13:46:22 +02:00