Tim Harvey 6ecbe13756 drivers: pci: imx: add imx_pcie_remove function ... There is no dedicated reset signal wired up for the MX6QDL thus if the bootloader enables the link we need some special handling to get the core back into a state where it is safe to touch it for configuration. While there has been some special handling in the Linux kernel to do this, it was removed in 4.11 thus we need to do it properly in the bootloader and therefore without this if you enable PCI in the bootloader you will hang while booting the 4.11 kernel. This puts the PCIe controller back into a safe state for the kernel driver before launching the kernel. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Tested-by: Peter Senna Tschudin <peter.senna@collabora.com>		2017-05-31 10:09:03 +02:00
..
cpu	pico-imx7d: Add initial support	2017-05-31 09:58:40 +02:00
dts	Merge git://git.denx.de/u-boot-fsl-qoriq	2017-05-26 11:19:27 -04:00
imx-common	drivers: pci: imx: add imx_pcie_remove function	2017-05-31 10:09:03 +02:00
include	Merge git://git.denx.de/u-boot-fsl-qoriq	2017-05-26 11:19:27 -04:00
lib	armv8: fsl: move ccn504 code into FSL Makefile	2017-05-17 23:20:50 +05:30
mach-aspeed	aspeed: Refactor SCU to use consistent mask & shift	2017-05-08 11:57:35 -04:00
mach-at91	Kconfig: USB: Migrate CONFIG_USB_EHCI to CONFIG_USB_EHCI_HCD	2017-05-15 10:40:05 -04:00
mach-bcm283x	bcm2835_wdt: support for the BCM2835/2836 watchdog	2017-05-09 20:30:08 -04:00
mach-davinci	Remove various unused interrupt related code	2017-04-06 20:42:18 -04:00
mach-exynos	Convert CONFIG_CMD_HASH to Kconfig	2017-05-22 12:38:15 -04:00
mach-highbank	ARM: highbank: move SoC sources to mach-highbank	2015-02-21 08:23:51 -05:00
mach-integrator	integrator: switch to DM serial port	2015-08-12 20:47:49 -04:00
mach-keystone	Convert CONFIG_SPL_BOARD_INIT to Kconfig	2017-05-22 07:29:48 -04:00
mach-kirkwood	Kconfig: Add a CONFIG_IDE option	2017-05-22 12:45:27 -04:00
mach-meson	board_f: Drop setup_dram_config() wrapper	2017-04-05 16:36:51 -04:00
mach-mvebu	arm: mvebu: Minor fixes in the AXP / A38x SERDES code	2017-05-09 13:38:18 +02:00
mach-omap2	omap: Drop CONFIG_OMAP_VC_I2C_HS_MCODE	2017-05-15 10:40:03 -04:00
mach-orion5x	board_f: Drop setup_dram_config() wrapper	2017-04-05 16:36:51 -04:00
mach-rmobile	ARM: rmobile: Move address of IICDVFS(I2C) to rcar-gen3-base.h	2017-05-22 15:07:31 +09:00
mach-rockchip	Convert CONFIG_SPL_BOARD_INIT to Kconfig	2017-05-22 07:29:48 -04:00
mach-s5pc1xx	arm: s5pc1xx: move SoC to mach-s5pc1xx	2015-11-30 17:17:01 +09:00
mach-snapdragon	drivers/sysreset: group sysreset drivers	2016-08-12 09:22:17 -04:00
mach-socfpga	Convert CONFIG_SPL_BOARD_INIT to Kconfig	2017-05-22 07:29:48 -04:00
mach-sti	board: Add STMicroelectronics STiH410-B2260 support	2017-03-14 20:40:21 -04:00
mach-stm32	stm32f7: configure mpu valid for f7 family	2017-05-12 08:37:08 -04:00
mach-sunxi	sunxi: enable automatic FIT build for 64-bit SoCs	2017-05-17 23:23:25 +05:30
mach-tegra	Convert CONFIG_CMD_ENTERRCM to Kconfig	2017-05-22 09:33:53 -04:00
mach-uniphier	ARM: uniphier: add more init code for PXs3	2017-05-17 21:56:17 +09:00
mach-versatile	arm: Remove versatileab board	2015-09-11 15:01:25 -04:00
mach-zynq	zynq: Move zynq to clock framework	2017-02-17 10:22:46 +01:00
thumb1/include/asm/proc-armv	arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD	2015-11-10 15:03:48 +01:00
config.mk	u-boot.elf: remove hard-coded arm64 flags	2017-05-10 16:16:09 +02:00
Kconfig	Merge git://git.denx.de/u-boot-fsl-qoriq	2017-05-26 11:19:27 -04:00
Kconfig.debug	arm: debug: add Kconfig entries for lowlevel debug	2014-10-26 22:23:12 +01:00
Makefile	ARM: omap2+: rename config to ARCH_OMAP2PLUS and consolidate Kconfig	2017-04-27 16:49:08 -04:00