u-boot-brain/arch/arm
Peng Fan 507da978fa imx: HAB: Update hab codes to support ARM64 and i.MX8M
There are some changes to support ARM64 i.MX8M platform in this patches:
1. The hab_rvt base and function vectors are different as i.MX6/7

2. Need to bypass an workaround for i.MX6 to fix problem in MMU.

3. The x18 register needed save & restore before calling any HAB API. According
   to ARM procedure call spec, the x18 is caller saved when it is used as
   temporary register. So calling HAB API may scratch this register, and
   cause crash once accessing the gd pointer.

   On ARMv7, the r9 is callee saved when it is used as variable register. So
   no need to save & restore it.

4. Add SEC_CONFIG fuse for iMX8M

When current EL is not EL3, the direct calling to HAB will fail because
CAAM/SNVS can't initialize at non-secure mode. In this case, we use
SIP call to run the HAB in ATF.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 09:18:29 +02:00
..
cpu mmc: fsl_esdhc: add pulse width detection workaround 2021-04-06 18:36:04 +08:00
dts imx8mn: Add LPDDR4 EVK board support 2021-04-08 09:18:29 +02:00
include imx: HAB: Update hab codes to support ARM64 and i.MX8M 2021-04-08 09:18:29 +02:00
lib arm: cp15: remove weak function arm_init_domains 2021-03-02 15:53:37 -05:00
mach-aspeed common: Drop asm/global_data.h from common header 2021-02-02 15:33:42 -05:00
mach-at91 First set of u-boot-atmel features for 2021.07 cycle 2021-03-30 11:24:09 -04:00
mach-bcm283x reset: Remove addr parameter from reset_cpu() 2021-03-02 14:03:02 -05:00
mach-bcmstb
mach-cortina
mach-davinci reset: Remove addr parameter from reset_cpu() 2021-03-02 14:03:02 -05:00
mach-exynos reset: Remove addr parameter from reset_cpu() 2021-03-02 14:03:02 -05:00
mach-highbank
mach-imx imx: HAB: Update hab codes to support ARM64 and i.MX8M 2021-04-08 09:18:29 +02:00
mach-integrator
mach-ipq40xx dm: treewide: Rename auto_alloc_size members to be shorter 2020-12-13 08:00:25 -07:00
mach-k3 reset: Remove addr parameter from reset_cpu() 2021-03-02 14:03:02 -05:00
mach-keystone reset: Remove addr parameter from reset_cpu() 2021-03-02 14:03:02 -05:00
mach-kirkwood reset: Remove addr parameter from reset_cpu() 2021-03-02 14:03:02 -05:00
mach-lpc32xx reset: Remove addr parameter from reset_cpu() 2021-03-02 14:03:02 -05:00
mach-mediatek board: mt7629: enable compression of u-boot to reduce the size of final image 2021-03-20 16:24:27 -04:00
mach-meson arm: meson: remove static ethernet link setup 2021-04-06 11:10:29 +02:00
mach-mvebu Prepare v2021.04-rc4 2021-03-15 12:15:38 -04:00
mach-nexell s5p4418_nanopi2: Drop dead code 2021-03-02 15:53:37 -05:00
mach-octeontx reset: Remove addr parameter from reset_cpu() 2021-03-02 14:03:02 -05:00
mach-octeontx2 reset: Remove addr parameter from reset_cpu() 2021-03-02 14:03:02 -05:00
mach-omap2 Prepare v2021.04-rc4 2021-03-15 12:15:38 -04:00
mach-orion5x reset: Remove addr parameter from reset_cpu() 2021-03-02 14:03:02 -05:00
mach-owl reset: Remove addr parameter from reset_cpu() 2021-03-02 14:03:02 -05:00
mach-qemu qemu: arm: Initialise virtio devices in board_late_init 2020-12-31 14:41:31 +01:00
mach-rmobile board: silinux: Enable recovery SPL for EK874 board 2021-03-16 20:09:30 +01:00
mach-rockchip rockchip: rk3368: move STACK_R_ADDR address and into Kconfig 2021-03-30 16:53:00 +08:00
mach-s5pc1xx
mach-snapdragon common: Drop asm/global_data.h from common header 2021-02-02 15:33:42 -05:00
mach-socfpga Prepare v2021.04-rc5 2021-03-29 18:00:21 -04:00
mach-sti
mach-stm32 treewide: Update email address Patrick Delaunay and Patrice Chotard 2020-12-09 10:57:50 +01:00
mach-stm32mp Prepare v2021.04-rc4 2021-03-15 12:15:38 -04:00
mach-sunxi - convert sunxi_display to DM_VIDEO 2021-03-04 14:36:40 -05:00
mach-tegra reset: Remove addr parameter from reset_cpu() 2021-03-02 14:03:02 -05:00
mach-u8500
mach-uniphier reset: Remove addr parameter from reset_cpu() 2021-03-02 14:03:02 -05:00
mach-versal common: Drop asm/global_data.h from common header 2021-02-02 15:33:42 -05:00
mach-versatile
mach-zynq reset: Remove addr parameter from reset_cpu() 2021-03-02 14:03:02 -05:00
mach-zynqmp Xilinx changes for v2021.04-rc3 2021-02-23 10:45:55 -05:00
mach-zynqmp-r5 reset: Remove addr parameter from reset_cpu() 2021-03-02 14:03:02 -05:00
thumb1/include/asm/proc-armv
config.mk Makefile: Rename ALL-y to INPUTS-y 2020-07-28 19:30:39 -06:00
Kconfig arm: socfpga: Move Stratix10 and Agilex to use TARGET_SOCFPGA_SOC64 2021-03-08 10:59:10 +08:00
Kconfig.debug
Makefile arm: octeontx2: Add support for OcteonTX2 SoC platforms 2020-08-25 08:01:16 +02:00