Hans de Goede 49043cbad1 sunxi: clock: Add clock_get_pll3() helper function ... Add a helper function to get the pll3 clock rate. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>		2015-08-14 08:37:38 +02:00
..
arch-am33xx	gpio: am43xx: expand gpio support	2015-08-12 20:48:04 -04:00
arch-armada100
arch-armv7	ARMv7: Factor out reusable timer_wait from sunxi/psci_sun7i.S	2015-07-20 11:44:38 -07:00
arch-bcm281xx	usb: gadget: bcm_udc_otg files	2015-07-22 08:57:54 +02:00
arch-bcmcygnus	arm: bcmcygnus: Enable Ethernet support	2015-08-12 20:47:28 -04:00
arch-bcmnsp
arch-ep93xx
arch-exynos	exynos: video: Remove non-device-tree code	2015-08-05 21:06:17 -06:00
arch-fsl-lsch3	armv8/lsch3/config: Define USB XHCI controller base address for LS2085A	2015-08-03 12:06:39 -07:00
arch-hi6220	mmc: hi6220_dw_mmc: Add hi6220 glue code for dw_mmc controller.	2015-08-12 20:48:01 -04:00
arch-imx	imx: mx6ul: Add i.MX6UL CPU type	2015-08-02 11:05:06 +02:00
arch-lpc32xx	nand: lpc32xx: add SLC NAND controller support	2015-08-12 20:47:33 -04:00
arch-ls102xa	Correct License and Copyright information on few files	2015-08-12 20:47:46 -04:00
arch-mvebu
arch-mx5	patch - arm - define SYS_CACHELINE_SIZE for mx5	2015-06-09 12:00:42 +02:00
arch-mx6	imx:mx6ul add dram spl configuration and header file	2015-08-02 11:05:09 +02:00
arch-mx25
arch-mx27
arch-mx31
arch-mx35
arch-mxs
arch-omap3	omap3: Reboot mode support	2015-08-12 20:47:36 -04:00
arch-omap4	omap: SPL boot devices cleanup and completion	2015-07-27 15:02:04 -04:00
arch-omap5	ARM: DRA7/ OMAP5: implement Auxiliary Control Register configuration	2015-08-12 20:47:50 -04:00
arch-orion5x
arch-pxa
arch-rmobile	arm: rmobile: alt: Update to QoS revision 0.31 and 0.321	2015-06-01 08:56:34 +09:00
arch-s3c24x0
arch-s5pc1xx
arch-sa1100
arch-spear
arch-stm32f1	ARMv7M: add STM32F1 support	2015-05-28 08:18:24 -04:00
arch-stm32f4	stm32f429: pass the device unique ID in DTB	2015-07-27 15:02:14 -04:00
arch-stv0991	stv0991: configure clock & pad muxing for qspi	2015-07-03 13:50:53 +05:30
arch-sunxi	sunxi: clock: Add clock_get_pll3() helper function	2015-08-14 08:37:38 +02:00
arch-tegra	ARM: tegra: Make pinmux.h standalone includible	2015-08-13 13:06:03 -07:00
arch-tegra20
arch-tegra30
arch-tegra114
arch-tegra124	tegra: Add missing tegra124 peripherals	2015-06-09 09:56:14 -07:00
arch-tegra210	Tegra: PLL: use per-SoC pllinfo table instead of PLL_DIVM/N/P, etc.	2015-08-05 15:22:51 -07:00
arch-u8500
arch-vf610	i2c: fix vf610 support	2015-07-10 10:10:48 +02:00
arch-zynqmp	ARM: zynqmp: Wire up SATA for the board	2015-07-28 11:56:27 +02:00
armv8	armv8: Fix TCR macros for shareability attribute	2015-07-20 11:44:40 -07:00
imx-common	imx: mx6 add PAD_CTL_SPEED_LOW for i.MX6SX/UL	2015-08-02 11:05:08 +02:00
iproc-common
kona-common
proc-armv
ti-common	omap-common: Common boot code OMAP3 support and cleanup	2015-07-27 15:02:03 -04:00
armv7.h
armv7m.h
assembler.h
atomic.h
bitops.h
bootm.h
byteorder.h
cache.h
config.h
davinci_rtc.h
dma-mapping.h
ehci-omap.h
emif.h	am33xx: Re-enable SW levelling for DDR2	2015-06-15 10:57:26 -04:00
errno.h
fsl_secure_boot.h
gic.h
global_data.h	omap-common: Common boot code OMAP3 support and cleanup	2015-07-27 15:02:03 -04:00
gpio.h
hardware.h
io.h
linkage.h
mach-types.h	arm, at91: support for sam9260 based smartweb board	2015-08-12 20:47:28 -04:00
macro.h
memory.h
omap_common.h	omap-common: SYS_BOOT-based fallback boot device selection for peripheral boot	2015-07-27 15:02:06 -04:00
omap_gpio.h	gpio: omap: Drop 'method' parameter	2015-08-12 20:48:06 -04:00
omap_mmc.h
omap_musb.h
pl310.h
posix_types.h
processor.h
psci.h
ptrace.h
sections.h
secure.h
setup.h
spl.h
string.h
system.h	armv8: caches: Added routine to set non cacheable region	2015-07-31 01:38:12 +02:00
types.h
u-boot-arm.h
u-boot.h	Revert "break build if it would produce broken binary"	2015-07-07 11:39:36 +02:00
unaligned.h
utils.h