mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-24 10:58:52 +09:00
![Horatiu Vultur](/assets/img/avatar_default.png)
In case the ddr training was failing, it couldn't reset, it was just hanging. Therefore reimplement it, so when ddr training is failing it would call _machine_restart, which power downs the DDR and does a force reset. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
71 lines
2.0 KiB
C
71 lines
2.0 KiB
C
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2018 Microsemi Corporation
|
|
*/
|
|
|
|
#include <common.h>
|
|
|
|
#include <asm/sections.h>
|
|
#include <asm/io.h>
|
|
|
|
#include <asm/reboot.h>
|
|
|
|
void _machine_restart(void)
|
|
{
|
|
#if defined(CONFIG_SOC_JR2) || defined(CONFIG_SOC_SERVALT)
|
|
register u32 reg = readl(BASE_CFG + ICPU_GENERAL_CTRL);
|
|
/* Set owner */
|
|
reg &= ~ICPU_GENERAL_CTRL_IF_SI_OWNER_M;
|
|
reg |= ICPU_GENERAL_CTRL_IF_SI_OWNER(1);
|
|
/* Set boot mode */
|
|
reg |= ICPU_GENERAL_CTRL_BOOT_MODE_ENA;
|
|
writel(reg, BASE_CFG + ICPU_GENERAL_CTRL);
|
|
/* Read back in order to make BOOT mode setting active */
|
|
reg = readl(BASE_CFG + ICPU_GENERAL_CTRL);
|
|
/* Reset CPU only - still executing _here_. but from cache */
|
|
writel(readl(BASE_CFG + ICPU_RESET) |
|
|
ICPU_RESET_CORE_RST_CPU_ONLY |
|
|
ICPU_RESET_CORE_RST_FORCE,
|
|
BASE_CFG + ICPU_RESET);
|
|
#elif defined(CONFIG_SOC_SERVAL)
|
|
register unsigned long i;
|
|
|
|
/* Prevent VCore-III from being reset with a global reset */
|
|
writel(ICPU_RESET_CORE_RST_PROTECT, BASE_CFG + ICPU_RESET);
|
|
|
|
/* Do global reset */
|
|
writel(PERF_SOFT_RST_SOFT_CHIP_RST, BASE_DEVCPU_GCB + PERF_SOFT_RST);
|
|
|
|
for (i = 0; i < 2000; i++)
|
|
;
|
|
|
|
/* Power down DDR for clean DDR re-training */
|
|
writel(readl(BASE_CFG + ICPU_MEMCTRL_CTRL) |
|
|
ICPU_MEMCTRL_CTRL_PWR_DOWN,
|
|
BASE_CFG + ICPU_MEMCTRL_CTRL);
|
|
|
|
while (!(readl(BASE_CFG + ICPU_MEMCTRL_STAT) &
|
|
ICPU_MEMCTRL_STAT_PWR_DOWN_ACK))
|
|
;
|
|
|
|
/* Reset VCore-III, only. */
|
|
writel(ICPU_RESET_CORE_RST_FORCE, BASE_CFG + ICPU_RESET);
|
|
#else /* Luton || Ocelot */
|
|
register u32 resetbits = PERF_SOFT_RST_SOFT_CHIP_RST;
|
|
(void)readl(BASE_DEVCPU_GCB + PERF_SOFT_RST);
|
|
|
|
/* Make sure VCore is NOT protected from reset */
|
|
clrbits_le32(BASE_CFG + ICPU_RESET, ICPU_RESET_CORE_RST_PROTECT);
|
|
|
|
/* Change to SPI bitbang for SPI reset workaround... */
|
|
writel(ICPU_SW_MODE_SW_SPI_CS_OE(1) | ICPU_SW_MODE_SW_SPI_CS(1) |
|
|
ICPU_SW_MODE_SW_PIN_CTRL_MODE, BASE_CFG + ICPU_SW_MODE);
|
|
|
|
/* Do the global reset */
|
|
writel(resetbits, BASE_DEVCPU_GCB + PERF_SOFT_RST);
|
|
#endif
|
|
|
|
while (1)
|
|
; /* NOP */
|
|
}
|