u-boot-brain/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c
Yangbo Lu 087bfe67ac armv8: fsl-lsch3: add clock support for the second eSDHC
Layerscape began to use two eSDHC controllers, for example,
LS1028A. They are same IP block with same reference clock.
This patch is to add clock support for the second eSDHC.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:56 +05:30

228 lines
5.5 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2014-2015, Freescale Semiconductor, Inc.
* Copyright 2019 NXP Semiconductors
*
* Derived from arch/power/cpu/mpc85xx/speed.c
*/
#include <common.h>
#include <linux/compiler.h>
#include <fsl_ifc.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/arch-fsl-layerscape/immap_lsch3.h>
#include <asm/arch/clock.h>
#include <asm/arch/soc.h>
#include "cpu.h"
DECLARE_GLOBAL_DATA_PTR;
#ifndef CONFIG_SYS_FSL_NUM_CC_PLLS
#define CONFIG_SYS_FSL_NUM_CC_PLLS 6
#endif
void get_sys_info(struct sys_info *sys_info)
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
struct ccsr_clk_cluster_group __iomem *clk_grp[2] = {
(void *)(CONFIG_SYS_FSL_CH3_CLK_GRPA_ADDR),
(void *)(CONFIG_SYS_FSL_CH3_CLK_GRPB_ADDR)
};
struct ccsr_clk_ctrl __iomem *clk_ctrl =
(void *)(CONFIG_SYS_FSL_CH3_CLK_CTRL_ADDR);
unsigned int cpu;
const u8 core_cplx_pll[16] = {
[0] = 0, /* CC1 PPL / 1 */
[1] = 0, /* CC1 PPL / 2 */
[2] = 0, /* CC1 PPL / 4 */
[4] = 1, /* CC2 PPL / 1 */
[5] = 1, /* CC2 PPL / 2 */
[6] = 1, /* CC2 PPL / 4 */
[8] = 2, /* CC3 PPL / 1 */
[9] = 2, /* CC3 PPL / 2 */
[10] = 2, /* CC3 PPL / 4 */
[12] = 3, /* CC4 PPL / 1 */
[13] = 3, /* CC4 PPL / 2 */
[14] = 3, /* CC4 PPL / 4 */
};
const u8 core_cplx_pll_div[16] = {
[0] = 1, /* CC1 PPL / 1 */
[1] = 2, /* CC1 PPL / 2 */
[2] = 4, /* CC1 PPL / 4 */
[4] = 1, /* CC2 PPL / 1 */
[5] = 2, /* CC2 PPL / 2 */
[6] = 4, /* CC2 PPL / 4 */
[8] = 1, /* CC3 PPL / 1 */
[9] = 2, /* CC3 PPL / 2 */
[10] = 4, /* CC3 PPL / 4 */
[12] = 1, /* CC4 PPL / 1 */
[13] = 2, /* CC4 PPL / 2 */
[14] = 4, /* CC4 PPL / 4 */
};
uint i, cluster;
uint freq_c_pll[CONFIG_SYS_FSL_NUM_CC_PLLS];
uint ratio[CONFIG_SYS_FSL_NUM_CC_PLLS];
unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
int cc_group[12] = CONFIG_SYS_FSL_CLUSTER_CLOCKS;
u32 c_pll_sel, cplx_pll;
void *offset;
sys_info->freq_systembus = sysclk;
#ifdef CONFIG_DDR_CLK_FREQ
sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ;
#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
sys_info->freq_ddrbus2 = CONFIG_DDR_CLK_FREQ;
#endif
#else
sys_info->freq_ddrbus = sysclk;
#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
sys_info->freq_ddrbus2 = sysclk;
#endif
#endif
/* The freq_systembus is used to record frequency of platform PLL */
sys_info->freq_systembus *= (gur_in32(&gur->rcwsr[0]) >>
FSL_CHASSIS3_RCWSR0_SYS_PLL_RAT_SHIFT) &
FSL_CHASSIS3_RCWSR0_SYS_PLL_RAT_MASK;
sys_info->freq_ddrbus *= (gur_in32(&gur->rcwsr[0]) >>
FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_SHIFT) &
FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_MASK;
#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
if (soc_has_dp_ddr()) {
sys_info->freq_ddrbus2 *= (gur_in32(&gur->rcwsr[0]) >>
FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_SHIFT) &
FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_MASK;
} else {
sys_info->freq_ddrbus2 = 0;
}
#endif
for (i = 0; i < CONFIG_SYS_FSL_NUM_CC_PLLS; i++) {
/*
* fixme: prefer to combine the following into one line, but
* cannot pass compiling without warning about in_le32.
*/
offset = (void *)((size_t)clk_grp[i/3] +
offsetof(struct ccsr_clk_cluster_group,
pllngsr[i%3].gsr));
ratio[i] = (in_le32(offset) >> 1) & 0x3f;
freq_c_pll[i] = sysclk * ratio[i];
}
for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) {
cluster = fsl_qoriq_core_to_cluster(cpu);
c_pll_sel = (in_le32(&clk_ctrl->clkcncsr[cluster].csr) >> 27)
& 0xf;
cplx_pll = core_cplx_pll[c_pll_sel];
cplx_pll += cc_group[cluster] - 1;
sys_info->freq_processor[cpu] =
freq_c_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel];
}
#if defined(CONFIG_FSL_IFC)
sys_info->freq_localbus = sys_info->freq_systembus /
CONFIG_SYS_FSL_IFC_CLK_DIV;
#endif
}
int get_clocks(void)
{
struct sys_info sys_info;
get_sys_info(&sys_info);
gd->cpu_clk = sys_info.freq_processor[0];
gd->bus_clk = sys_info.freq_systembus / CONFIG_SYS_FSL_PCLK_DIV;
gd->mem_clk = sys_info.freq_ddrbus;
#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
gd->arch.mem2_clk = sys_info.freq_ddrbus2;
#endif
#if defined(CONFIG_FSL_ESDHC)
gd->arch.sdhc_clk = gd->bus_clk / CONFIG_SYS_FSL_SDHC_CLK_DIV;
#endif /* defined(CONFIG_FSL_ESDHC) */
if (gd->cpu_clk != 0)
return 0;
else
return 1;
}
/********************************************
* get_bus_freq
* return platform clock in Hz
*********************************************/
ulong get_bus_freq(ulong dummy)
{
if (!gd->bus_clk)
get_clocks();
return gd->bus_clk;
}
/********************************************
* get_ddr_freq
* return ddr bus freq in Hz
*********************************************/
ulong get_ddr_freq(ulong ctrl_num)
{
if (!gd->mem_clk)
get_clocks();
/*
* DDR controller 0 & 1 are on memory complex 0
* DDR controller 2 is on memory complext 1
*/
#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
if (ctrl_num >= 2)
return gd->arch.mem2_clk;
#endif
return gd->mem_clk;
}
int get_i2c_freq(ulong dummy)
{
return get_bus_freq(0) / CONFIG_SYS_FSL_I2C_CLK_DIV;
}
int get_dspi_freq(ulong dummy)
{
return get_bus_freq(0) / CONFIG_SYS_FSL_DSPI_CLK_DIV;
}
#ifdef CONFIG_FSL_ESDHC
int get_sdhc_freq(ulong dummy)
{
if (!gd->arch.sdhc_clk)
get_clocks();
return gd->arch.sdhc_clk;
}
#endif
int get_serial_clock(void)
{
return get_bus_freq(0) / CONFIG_SYS_FSL_DUART_CLK_DIV;
}
unsigned int mxc_get_clock(enum mxc_clock clk)
{
switch (clk) {
case MXC_I2C_CLK:
return get_i2c_freq(0);
#if defined(CONFIG_FSL_ESDHC)
case MXC_ESDHC_CLK:
case MXC_ESDHC2_CLK:
return get_sdhc_freq(0);
#endif
case MXC_DSPI_CLK:
return get_dspi_freq(0);
default:
printf("Unsupported clock\n");
}
return 0;
}