Commit Graph

1402 Commits

Author SHA1 Message Date
Baruch Siach
fea3939d31 mmc: relocate code comment
The comment about init op being NULL used to be next to the NULL check
code. Commit 8ca51e51c1 ("dm: mmc: Add a way to use driver model for
MMC operations") separated the comment from the code. Put them back
together.

Fixes: 8ca51e51c1 ("dm: mmc: Add a way to use driver model for MMC operations")
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-07-31 15:31:36 +08:00
Weijie Gao
caa332336d mmc: mtk-sd: add WATCHDOG_RESET() to prevent watchdog timeout
When reading large data in once (reading 512MiB is tested on MT7623), a
watchdog timeout is triggered due to watchdog not being fed.

This patch adds WATCHDOG_RESET() to msdc_start_data() so the watchdog will
be fed every 1024 blocks are read/written.

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-07-31 15:31:36 +08:00
Baruch Siach
58d65d5082 mmc: sdhci: fix chip detect gpio property name
The standard property name for chip-detect gpio is "cd-gpios". All
in-tree DT files use only this name.

Fixes: 451931ea70 ("mmc: sdhci: Read cd-gpio from devicetree")
Cc: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-07-31 15:31:36 +08:00
Baruch Siach
41a9fab8da mmc: mv_sdhci: fix uninitialized pointer deref on probe
Since commit 3d296365e4 ("mmc: sdhci: Add support for
sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc
field. Move the mmc field initialization before sdhci_setup_cfg()
call to avoid crash on mmc pointer dereference.

Fixes: 3d296365e4 ("mmc: sdhci: Add support for sdhci-caps-mask")
Cc: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2019-07-31 15:31:36 +08:00
Tom Rini
75551c8bfc Merge branch '2019-07-26-ti-imports'
- Bring in the rest of the J271E platform
- Various OMAP3/AM3517, DA850 fixes
2019-07-27 19:50:52 -04:00
Tom Rini
222701e157 Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-spi
- fix for fsl_qspi read timeout (Thomas)
- spi-mem read data size fix (Ye Li)
- SiFive SPI driver, mmc_spi flags (Bhargav, Anup)
- Micron spi-nor parts (Ashish)
- MT7629 spi-mem driver(Weijie)
2019-07-27 09:34:07 -04:00
Faiz Abbas
794453f91d mmc: am654_sdhci: Separate J721E compatible into 8bit and 4bit versions
The j721e 4 bit instances don't have a hard DLL and therefore don't need
any DLL related configurations. Split the compatibles into an 8 bit and a
4 bit one. Add a private flags field which can be used to check if the
DLL is present and don't register the set_ios_post callback for the 4 bit
compatible instances.

Also update the compatibles in k3-j721e-main.dtsi to avoid breaking boot
with the new compatibles.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-26 21:49:28 -04:00
Kever Yang
4dcdc5c159 rockchip: sdhci: Fix sdhci mmc driver probe abort
This patch fix mmc driver abort caused by below patch:
3d296365e4 mmc: sdhci: Add support for sdhci-caps-mask

After the patch sdhci_setup_cfg() access to host->mmc->dev,
so we have to do init before make the call to the function()

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Anup Patel
a706029410 mmc: mmc_spi: Use SPI_XFER_BEGIN and SPI_XFER_END flags
Most DM based SPI host controller drivers use SPI_XFER_BEGIN and
SPI_XFER_END flags to enable/disable slave chip select.

This patch extends MMC SPI driver to pass SPI_XFER_BEGIN flag when
MMC command is send at start and pass SPI_XFER_END flag using a
dummy transfer (of bitlen = 0) at the end of MMC command.

Suggested-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Sagar Kadam <sagar.kadam@sifive.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-18 17:11:16 +05:30
Andreas Dannenberg
70942db4dd mmc: am654_sdhci: Allow driver to probe without PDs specified
We would like to use the driver even without power domains being
specified for cases such as during early boot when the required power
domains have already gotten enabled by the SoC's boot ROM and such
explicit initialization is not needed and possible.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-07-17 11:12:54 -04:00
Faiz Abbas
f605807f3d mmc: am654_sdhci: Add a platform specific set_control_reg() callback
Add a platform specific set_control_reg() callback to help switch to
UHS speed modes.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-07-17 11:12:08 -04:00
Faiz Abbas
d1c0a2200a mmc: sdhci: Add support for HOST_CONTROL2 and setting UHS timings
The HOST_CONTROL2 register is a part of SDHC v3.00 and not just specific
to arasan/zynq controllers. Add the same to sdhci.h.

Also create a common API to set UHS timings in HOST_CONTROL2.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-07-17 11:12:08 -04:00
Faiz Abbas
ce142ff0c5 mmc: am654_sdhci: Add Support for PHY
Add support in the driver for handling phy specific registers.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-07-17 11:12:08 -04:00
Faiz Abbas
a8185c50d3 mmc: sdhci: Make set_ios_post() return int
Make set_ios_post() return int to faciliate error handling in
platform drivers.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-07-17 11:12:08 -04:00
Faiz Abbas
3966c7d006 mmc: sdhci: Make sdhci_set_clock() non static
The am654_sdhci driver needs to switch the clock off
before disabling its phy dll and needs to re-enable
the clock before enabling the phy again.

Therefore, make the sdhci_set_clock() function accessible
in the am654_sdhci driver.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-07-17 11:12:08 -04:00
Faiz Abbas
3d296365e4 mmc: sdhci: Add support for sdhci-caps-mask
Add Support for masking some bits in the capabilities
register of a host controller.

Also remove the redundant readl() into caps1.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-07-17 11:12:08 -04:00
Faiz Abbas
6fca7fb3a0 mmc: am654_sdhci: Remove quirks
The host controller works perfectly well without having to add any
quirks. Remove them.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-07-17 11:12:08 -04:00
Faiz Abbas
3a1a0dfc39 arm64: dts: k3: Sync sdhci0 node from kernel and change driver name
Sync the sdhci0 node from kernel. This changes the compatible that is
required to be there in the driver. Change the same for the SD card node
which is not yet supported in kernel. This also syncs the main_pmx0 node
as a side effect.

Also change the name of the driver to match the compatible in kernel.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-07-17 11:12:08 -04:00
Tom Rini
6674dc77c2 Merge tag 'mmc-2019-7-15' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmc
- mmc spi driver model support
- drop mmc_spi command
- enhanced Strobe mmc HS400 support
- minor mmc bug/fixes and optimization
- omap hsmmc and mvbeu update
- sdhci card detect support
2019-07-15 09:42:41 -04:00
Peng Fan
356f782c6e mmc: fsl_esdhc_imx: enlarge mmc timeout
Flash system partition with fastboot will earse the partition firstly
The 600ms timeout will fail on some SD Card. Enlarge it to 5s to make
it works for most of sdcard

Cc: guoyin.chen <guoyin.chen@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-15 10:30:09 +08:00
Peng Fan
609ba125c5 mmc: fsl_esdhc_imx: add i.MX8QM compatible
Add i.MX8QM compatible and soc data, the soc data is following Linux
i.MX SDHC driver.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-15 10:30:09 +08:00
Peng Fan
e9c2255267 mmc: fsl_esdhc_imx: add HS400 Enhanced strobe support
Implement set_enhanced_strobe hook for fsl_esdhc_imx,
,in esdhc_set_timing and esdhc_change_pinstate, also handle HS400_ES.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-15 10:30:09 +08:00
Peng Fan
b0155ac63c mmc: fsl_esdhc_imx: use mmc_of_parse to set host_caps
Use mmc_of_parse to set host_caps.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-15 10:30:09 +08:00
Peng Fan
479a8dd6dc mmc: Parse no-1-8-v DT property
Parse no-1-8-v DT

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Cc: Marek Vasut <marek.vasut+renesas@gmail.com>
2019-07-15 10:30:08 +08:00
Peng Fan
b0fc3127bd mmc: Parse HS400 Enhanced strobe DT properties
Add HS400 Enhanced strobe properties parsing support to mmc_of_parse().

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Cc: Marek Vasut <marek.vasut+renesas@gmail.com>
2019-07-15 10:30:08 +08:00
Peng Fan
44acd49248 mmc: support hs400 enhanced strobe mode
eMMC 5.1+ supports HS400 Enhances Strobe mode without the need for
tuning procedure.
The flow is as following:
 - set HS_TIMIMG (Highspeed)
 - Host change freq to <= 52Mhz
 - set the bus width to Enhanced strobe and DDR8Bit(CMD6),
   EXT_CSD[183] = 0x86 instead of 0x80
 - set HS_TIMING to 0x3 (HS400)
 - Host change freq to <= 200Mhz
 - Host select HS400 enhanced strobe complete

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-15 10:30:08 +08:00
Ye Li
8277171663 mmc: fsl_esdhc_imx: fix config check issue when building in SPL
Should use CONFIG_IS_ENABLED not IS_ENABLED for clock and regulator drivers,
CONFIG_IS_ENABLED will check the CONFIG_SPL_CLK and CONFIG_SPL_DM_REGULATOR
when building SPL.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-15 10:30:08 +08:00
Bhargav Shah
05e35d4297 mmc: mmc_spi: Re-write driver using DM framework
This patch rewrites MMC SPI driver using U-Boot DM
framework and get it's working on SiFive Unleashed
board.

Signed-off-by: Bhargav Shah <bhargavshah1988@gmail.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-15 10:16:49 +08:00
Anup Patel
f49ff79935 mmc: skip select_mode_and_width for MMC SPI host
The MMC mode and width are fixed for MMC SPI host hence we skip
sd_select_mode_and_width() and mmc_select_mode_and_width() for
MMC SPI host.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-15 10:16:49 +08:00
Jean-Jacques Hiblot
0538477c53 mmc: retry a few times if a partition switch failed
This operation may fail. Retry it a few times before giving up and report
a failure.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-07-15 10:16:49 +08:00
Jean-Jacques Hiblot
9bc5666c8a mmc: do not change mode when accessing a boot partition
Accessing the boot partition had been error prone with HS200 and HS400 and
was disabled. The driver first switched to a lesser mode and then switched
the partition access. It was mostly due to a bad handling of the switch and
has been fixed, so let's remove this 'feature'

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-07-15 10:16:49 +08:00
Jean-Jacques Hiblot
bb98b8c5c0 mmc: During a switch, poll on dat0 if available and check the final status
The switch operation can sometimes make the bus unreliable, in that case
the send_status parameter should be false to indicate not to poll using
CMD13. If polling on dat0 is possible, we should use it to detect the end
of the operation.
At the end of the operation it is safe to use CMD13 to get the status of
the card. It is important to do so because the operation may have failed.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-07-15 10:16:49 +08:00
Jean-Jacques Hiblot
513e00b64e mmc: When switching partition, use the timeout specified in the ext_csd
The e-MMC spec allows the e-MMC to specify a timeout for the partition
switch command. It can take up to 2550 ms. There is no lower limit to this
value in the spec, but do as the the linux driver does and force it to be
at least 300ms.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-07-15 10:16:49 +08:00
Jean-Jacques Hiblot
39320c537d mmc: use the generic timeout for cmd6 (SWITCH) provided in the ext_csd
Starting with rev 4.5, the eMMC can define a generic timeout for the
SWITCH command.

Following Linux Kernel code, the timeout also changed from 1000 -> 500

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-07-15 10:16:49 +08:00
Jean-Jacques Hiblot
cd0b80ec9c mmc: if possible, poll the busy state using DAT0
Using the DAT0 line as a rdy/busy line is an alternative to reading the
status register of the card. It especially useful in situation where the
bus is not in a good shape, like when modes are switched.
This is also how the linux driver behaves.

Note of warning: As per the specification, while polling on DAT0 the CLK
must not turned off: "[...] Without a clock edge the Device (unless
previously disconnected by a deselect command (CMD7)) will force the DAT0
line down, forever. [...]"

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-07-15 10:16:49 +08:00
Jean-Jacques Hiblot
863d10044a mmc: add mmc_poll_for_busy() and change the purpose of mmc_send_status()
mmc_send_status() is currently used to poll the card until it is ready, not
actually returning the status of the card.
Make it return the status and add another function to poll the card.

Also remove the 'extern' declaration in the mmc-private.h header to comply
with the coding standard.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-07-15 10:16:49 +08:00
Jean-Jacques Hiblot
c2c22b9df3 mmc: omap_hsmmc: provide wait_dat0 even if UHS modes are not supported
This function can also be used for eMMC devices.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-07-15 10:16:49 +08:00
Jean-Jacques Hiblot
c5bda37589 Revert "mmc: Add a new callback function to perform the 74 clocks cycle sequence"
This reverts commit 318a7a576b.

The last and only user of this callback had been the omap_hsmmc driver.
It is not used anymore. Removing the callback.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-07-15 10:16:49 +08:00
Jean-Jacques Hiblot
db52e19ced mmc: omap_hsmmc: don't fill the send_init_stream callback
This is not required. The MMC core sends CMD0 right after the
initialization and it serves the same purpose.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-07-15 10:16:49 +08:00
Jean-Jacques Hiblot
b2ffa3320a mmc: omap_hsmmc: reset FSM for DAT and CMD lines if needed before a new command
It sometimes happen that the PSTATE register does not indicate that the
bus is ready when it really is. This usually happens after a mode switch.
In that case it makes sense to reset the FSM handling the CMD and DATA

Also reset the FSMs if the STATE register cannot be cleared. This also
sometimes happens after a mode switch.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-07-15 10:16:49 +08:00
Akio Hirayama
24b1e0c7e2 mmc: rpmb: fix response type of CMD25
The response type of CMD25 is R1 instead of R1b.

Signed-off-by: Akio Hirayama <hirayama.akio@socionext.com>
[masahiro: add log ]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-15 10:16:49 +08:00
T Karthik Reddy
da18c62b6e mmc: sdhci: Implement SDHCI card detect
Card detect function implemented for SDHCI framework.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-15 10:16:49 +08:00
T Karthik Reddy
451931ea70 mmc: sdhci: Read cd-gpio from devicetree
This patch reads cd-gpio property from devicetree

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-07-15 10:16:49 +08:00
T Karthik Reddy
86a94e7b2b mmc: Read sd card detect properties from DT
This patch reads card detect properties from device tree &
added mmc capability macros in mmc.h.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-15 10:16:49 +08:00
Tom Rini
a9a3a37f92 - syscon: add support for power off
- stm32mp1: add op-tee config
 - stm32mp1: add specific commands: stboard and stm32key
 - add stm32 mailbox driver
 - solve many stm32 warnings when building with W=1
 - update stm32 gpio driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJdKK2iAAoJEOKyvdngqpN1TvcH/jj1ujNdRKn994R3DqULzFtc
 Y0WGjAciTUuV0d9gZLxPZJwlWfqxLgbmUEBlPJQJe79gaM7kNN0PgAe6GNedFhGk
 UhRR7GgbA7wogorpRo8aLe3XYEqHtgPFkf1nSiNz/AHLBg8SB20VhWcY90Kha9lh
 IJ0GK+lSdCxiyaLBC2nswnI2PS/fl4NfC7KWvujtKZduIDIOHqh5q+39llpejyuw
 WOzL/bEa4ald6JKpxOii2KXNwD1gUDQGmPzADYcIdwzJtx9hft7DBSLC5Nr+ndBz
 72TjpbtfJ/qIurv8HeXYs9mtwnCO3WP+015fog0T0zjZ48BrT1A8C96ezwLOfz0=
 =W3ny
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20190712' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm

- syscon: add support for power off
- stm32mp1: add op-tee config
- stm32mp1: add specific commands: stboard and stm32key
- add stm32 mailbox driver
- solve many stm32 warnings when building with W=1
- update stm32 gpio driver
2019-07-14 09:09:49 -04:00
Ezequiel Garcia
d66fb5b1f6 mmc: Register only the first MMC device on MMC_TINY
When MMC_TINY is enabled, support for only one MMC device
is provided. Boards that register more than one device,
will just write over mmc_static keeping only the last one
registered.

This commit prevents this, keeping only the first MMC
device created. A debug warning message is added, if nothing
else, as a hint/documentation for developers.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
2019-07-13 11:11:26 -04:00
Ezequiel Garcia
bf7c01d92b spl: Move SPL_MMC_TINY option to appear under SPL menu
The SPL_MMC_TINY implements feature-reduced MMC support
on SPL, and as such, it's more consistent and convenient
to find it as part of the SPL configuration.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
2019-07-13 11:11:26 -04:00
Patrick Delaunay
0e9fb25f71 mmc: stm32_sdmmc2: avoid warnings when building with W=1 option
This patch solves warnings detected by setting W=1 when building.

Warnings type detected:
 - [-Wmissing-prototypes]
 - [-Wimplicit-fallthrough=]

Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12 11:50:54 +02:00
Yangbo Lu
5053da2e4a mmc: fsl_esdhc_imx: drop useless code
Dropped useless code for i.MX eSDHC driver.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-06-23 14:18:48 +08:00
Yangbo Lu
4d8ff42e46 mmc: fsl_esdhc: drop i.MX code
Dropped i.MX code which couldn't be reused.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
2019-06-23 14:18:42 +08:00